Korloy SNMG SNMM

Sort by:
SNMM190612-GH NC3120 (10pcs)

SNMM190612-GH NC3120 (10pcs)

$65.19 USD
Coated:NC3120,Designation:SNMM190612-GH NC3120 Turning Insert (Negative) Dimensions (mm):d:19.05,t:6.35,d1:7.93 Square 90° Negative Cutting Condition:fn (mm/rev):0.30~0.70,ap (mm):3.00~8.00 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with chipping...
SNMM150612-GH NC3120 (10pcs)

SNMM150612-GH NC3120 (10pcs)

$50.93 USD
Coated:NC3120,Designation:SNMM150612-GH NC3120 Turning Insert (Negative) Dimensions (mm):d:15.875,t:6.35,d1:6.35 Square 90° Negative Cutting Condition:fn (mm/rev):0.30~0.70,ap (mm):2.50~8.00
SNMM190612-GH NC500H (10pcs)

SNMM190612-GH NC500H (10pcs)

$65.19 USD
Coated:NC500H,Designation:SNMM190612-GH NC500H Turning Insert (Negative) Dimensions (mm):d:19.05,t:6.35,d1:7.93 Square 90° Negative Cutting Condition:fn (mm/rev):0.30~0.70,ap (mm):3.00~8.00
SNMG190616-HS PC9030 (10pcs)

SNMG190616-HS PC9030 (10pcs)

$63.15 USD
Coated:PC9030,Designation:SNMG190616-HS PC9030 Turning Insert (Negative) Square 90° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate adopted. High...
SNMG190612-HS PC9030 (10pcs)

SNMG190612-HS PC9030 (10pcs)

$63.15 USD
Coated:PC9030,Designation:SNMG190612-HS PC9030 Turning Insert (Negative) Square 90° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate adopted. High...
SNMG190608-B25 NC3020 (10pcs)

SNMG190608-B25 NC3020 (10pcs)

$63.15 USD
Coated:NC3020,Designation:SNMG190608-B25 NC3020 Turning Insert (Negative) Dimensions (mm):d:19.05,t:6.35,d1:7.93 Square 90° Negative Cutting Condition:fn (mm/rev):0.25~0.60,ap (mm):3.00~8.00
SNMG190612-GR NC500H (10pcs)

SNMG190612-GR NC500H (10pcs)

$64.17 USD
Coated:NC500H,Designation:SNMG190612-GR NC500H Turning Insert (Negative) Dimensions (mm):d:19.05,t:6.35,d1:7.93 Square 90° Negative Cutting Condition:fn (mm/rev):0.30~0.80,ap (mm):1.70~9.00
SNMG190616-GR NC3120 (10pcs)

SNMG190616-GR NC3120 (10pcs)

$64.17 USD
Coated:NC3120,Designation:SNMG190616-GR NC3120 Turning Insert (Negative) Dimensions (mm):d:19.05,t:6.35,d1:7.93 Square 90° Negative Cutting Condition:fn (mm/rev):0.31~0.82,ap (mm):1.90~12.30 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with chipping...
SNMG190616-GR NC3030 (10pcs)

SNMG190616-GR NC3030 (10pcs)

$64.17 USD
Coated:NC3030,Designation:SNMG190616-GR NC3030 Turning Insert (Negative) Dimensions (mm):d:19.05,t:6.35,d1:7.93 Square 90° Negative Cutting Condition:fn (mm/rev):0.31~0.82,ap (mm):1.90~12.30
SNMG190616-GR NC3020 (10pcs)

SNMG190616-GR NC3020 (10pcs)

$64.17 USD
Coated:NC3020,Designation:SNMG190616-GR NC3020 Turning Insert (Negative) Dimensions (mm):d:19.05,t:6.35,d1:7.93 Square 90° Negative Cutting Condition:fn (mm/rev):0.31~0.82,ap (mm):1.90~12.30
SNMG190612-GR NC3120 (10pcs)

SNMG190612-GR NC3120 (10pcs)

$64.17 USD
Coated:NC3120,Designation:SNMG190612-GR NC3120 Turning Insert (Negative) Dimensions (mm):d:19.05,t:6.35,d1:7.93 Square 90° Negative Cutting Condition:fn (mm/rev):0.30~0.80,ap (mm):1.70~9.00 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with chipping...
SNMG190612-GR NC3030 (10pcs)

SNMG190612-GR NC3030 (10pcs)

$64.17 USD
Coated:NC3030,Designation:SNMG190612-GR NC3030 Turning Insert (Negative) Dimensions (mm):d:19.05,t:6.35,d1:7.93 Square 90° Negative Cutting Condition:fn (mm/rev):0.30~0.80,ap (mm):1.70~9.00 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030 Features: High chipping and welding resistance for stable machining. Harmony between...
SNMG190612-GR NC3020 (10pcs)

SNMG190612-GR NC3020 (10pcs)

$64.17 USD
Coated:NC3020,Designation:SNMG190612-GR NC3020 Turning Insert (Negative) Dimensions (mm):d:19.05,t:6.35,d1:7.93 Square 90° Negative Cutting Condition:fn (mm/rev):0.30~0.80,ap (mm):1.70~9.00
SNMG150612-GR NC3120 (10pcs)

SNMG150612-GR NC3120 (10pcs)

$46.67 USD
Coated:NC3120,Designation:SNMG150612-GR NC3120 Turning Insert (Negative) Dimensions (mm):d:15.875,t:4.76~6.35,d1:6.35 Square 90° Negative Cutting Condition:fn (mm/rev):0.29~0.75,ap (mm):1.40~7.00 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with chipping...
SNMG150612-GR NC3030 (10pcs)

SNMG150612-GR NC3030 (10pcs)

$46.67 USD
Coated:NC3030,Designation:SNMG150612-GR NC3030 Turning Insert (Negative) Dimensions (mm):d:15.875,t:4.76~6.35,d1:6.35 Square 90° Negative Cutting Condition:fn (mm/rev):0.29~0.75,ap (mm):1.40~7.00 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030 Features: High chipping and welding resistance for stable machining. Harmony between...
SNMG150612-GR NC3020 (10pcs)

SNMG150612-GR NC3020 (10pcs)

$46.67 USD
Coated:NC3020,Designation:SNMG150612-GR NC3020 Turning Insert (Negative) Dimensions (mm):d:15.875,t:4.76~6.35,d1:6.35 Square 90° Negative Cutting Condition:fn (mm/rev):0.29~0.75,ap (mm):1.40~7.00
SNMG150608-GR NC3030 (10pcs)

SNMG150608-GR NC3030 (10pcs)

$49.19 USD
Coated:NC3030,Designation:SNMG150608-GR NC3030 Turning Insert (Negative) Dimensions (mm):d:15.875,t:4.76~6.35,d1:6.35 Square 90° Negative Cutting Condition:fn (mm/rev):0.25~0.60,ap (mm):1.00~7.00 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030 Features: High chipping and welding resistance for stable machining. Harmony between...
SNMG120408-HS PC9030 (10pcs)

SNMG120408-HS PC9030 (10pcs)

$32.08 USD
Coated:PC9030,Designation:SNMG120408-HS PC9030  Turning Insert (Negative) Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate adopted....
SNMG120408-HS PC5300 (10pcs)

SNMG120408-HS PC5300 (10pcs)

$34.03 USD
Coated:PC5300,Designation:SNMG120408-HS PC5300 Turning Insert (Negative) Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00 PC5300:Workpiece:Stainless steel:General cutting,Heat resistant alloy, Titanium alloy:General cutting, PC5300 Universal PVD grade ● Advanced PVD coating with high hardness and high temp...
SNMG120408-HM PC9030 (10pcs)

SNMG120408-HM PC9030 (10pcs)

$32.08 USD
Coated:PC9030,Designation:SNMG120408-HM PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:3.18~4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...
SNMG120408-HM NC3120 (10pcs)

SNMG120408-HM NC3120 (10pcs)

$31.69 USD
Coated:NC3120,Designation:SNMG120408-HM NC3120 Turning Insert (Negative) Dimensions (mm):d:12.7,t:3.18~4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with chipping...
SNMG120408-HM NC3030 (10pcs)

SNMG120408-HM NC3030 (10pcs)

$32.08 USD
Coated:NC3030,Designation:SNMG120408-HM NC3030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:3.18~4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030 Features: High chipping and welding resistance for stable machining. Harmony between...
SNMG120408-HM NC3020 (10pcs)

SNMG120408-HM NC3020 (10pcs)

$31.69 USD
Coated:NC3020,Designation:SNMG120408-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:12.7,t:3.18~4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00
SNMG120408-HA PC9030 (10pcs)

SNMG120408-HA PC9030 (10pcs)

$32.08 USD
Coated:PC9030,Designation:SNMG120408-HA PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.10~0.40,ap (mm):0.80~3.50 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...
SNMG120408-GS PC9030 (10pcs)

SNMG120408-GS PC9030 (10pcs)

$32.08 USD
Coated:PC9030,Designation:SNMG120408-GS PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:3.18~4.76,d1:5.16 Square 90° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...
SNMG120404-GS PC9030 (10pcs)

SNMG120404-GS PC9030 (10pcs)

$32.08 USD
Coated:PC9030,Designation:SNMG120404-HA PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:3.18~4.76,d1:5.16 Square 90° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...
SNMG120404-HS PC9030 (10pcs)

SNMG120404-HS PC9030 (10pcs)

$32.08 USD
Coated:PC9030,Designation:SNMG120404-HS PC9030 Turning Insert (Negative) Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate adopted....
SNMG120404-HS PC5300 (10pcs)

SNMG120404-HS PC5300 (10pcs)

$34.61 USD
Coated:PC5300,Designation:SNMG120404-HS PC5300 Turning Insert (Negative) Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00 PC5300:Workpiece:Stainless steel:General cutting,Heat resistant alloy, Titanium alloy:General cutting, PC5300 Universal PVD grade ● Advanced PVD coating with high hardness and high temp...
SNMG120404-HM PC9030 (10pcs)

SNMG120404-HM PC9030 (10pcs)

$32.08 USD
Coated:PC9030,Designation:SNMG120404-HM PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:3.18~4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.15~0.42,ap (mm):0.60~4.20 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...
SNMG120404-HM NC3120 (10pcs)

SNMG120404-HM NC3120 (10pcs)

$32.08 USD
Coated:NC3120,Designation:SNMG120404-HM NC3120 Turning Insert (Negative) Dimensions (mm):d:12.7,t:3.18~4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.15~0.42,ap (mm):0.60~4.20 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with chipping...
SNMG120404-HM NC3030 (10pcs)

SNMG120404-HM NC3030 (10pcs)

$32.08 USD
Coated:NC3030,Designation:SNMG120404-HM NC3030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:3.18~4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.15~0.42,ap (mm):0.60~4.20 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030 Features: High chipping and welding resistance for stable machining. Harmony between...
SNMG120404-HM NC3020 (10pcs)

SNMG120404-HM NC3020 (10pcs)

$31.69 USD
Coated:NC3020,Designation:SNMG120404-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:12.7,t:3.18~4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.15~0.42,ap (mm):0.60~4.20
SNMG120404-HA PC9030 (10pcs)

SNMG120404-HA PC9030 (10pcs)

$32.08 USD
Coated:PC9030,Designation:SNMG120404-HA PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.10~0.35,ap (mm):0.80~3.50 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...
SNMG120404-HA H01 (10pcs)

SNMG120404-HA H01 (10pcs)

$27.41 USD
Uncoated:H01,Designation:SNMG120404-HA H01 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Square 90° Negative Cutting Condition:fn (mm/rev):0.10~0.35,ap (mm):0.80~3.50 H01:Workpiece:Cast iron:Continuous cutting,Non-ferrous metal:Continuous cutting,Heat resistant alloy, Titanium alloy:Continuous cutting,Hardened steel:Continuous cutting Uncoated carbide grades for...