Positive Turning Insert Korloy

Uncoated:H01,Designation:CCGT060202-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.01~0.12,ap (mm):0.05~3.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear resistance...

Uncoated:H01,Designation:CCGT060204-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.15,ap (mm):0.10~3.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT060208-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.20,ap (mm):0.10~4.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT09T302-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.20,ap (mm):0.05~3.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear resistance...

Uncoated:H01,Designation:CCGT09T304-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.30,ap (mm):0.10~5.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT09T308-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.03~0.50,ap (mm):0.10~5.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT120402-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.30,ap (mm):0.05~4.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT120404-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.03~0.50,ap (mm):0.10~5.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT120408-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.04~0.80,ap (mm):0.10~5.50 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Coated:NC3020,Designation:CCMT060202-HMP NC3020 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.03~0.12,ap (mm):0.10~1.50

Coated:PC9030,Designation:CCMT060202-HMP PC9030 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.03~0.12,ap (mm):0.10~1.50 Workpiece:Stainless steel:Interrupted cutting   PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel....

Coated:NC3020,Designation:CCMT060204-HMP NC3020  Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.17,ap (mm):0.20~1.50

Cermet:CN2000,Designation:CCMT060204-C25 CN2000 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.17,ap (mm):0.20~1.50

Coated:NC3020,Designation:CCMT060204-HMP NC3030 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.17,ap (mm):0.20~1.50 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030Features: Harmony between substrate with excellent wear/fracture resistance and Al2O3...

Coated:NC3120,Designation:CCMT060204-HMP NC3120 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.17,ap (mm):0.20~1.50 Workpiece:Steel:General cutting NC3120Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with...

Coated:PC5300,Designation:CCMT060204-HMP PC5300 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.17,ap (mm):0.20~1.50 Workpiece:Stainless steel:General cutting ,Heat resistant alloy, Titanium alloy:General cutting Advanced PVD coating with high...

Coated:NC3020,Designation:CCMT060208-HMP NC3020 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.40~2.40 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030Features: Harmony between substrate with excellent wear/fracture resistance and Al2O3...

Coated:PC9030,Designation:CCMT060204-HMP PC9030 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.17,ap (mm):0.20~2.40 Workpiece:Stainless steel:Interrupted cutting   PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel....

Coated:PC9030,Designation:CCMT060208-HMP PC9030 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.40~2.40 Workpiece:Stainless steel:Interrupted cutting   PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel....

Coated:NC3020,Designation:CCMT09T302-HMP NC3020 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.07~0.22,ap (mm):0.10~2.00 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030Features: Harmony between substrate with excellent wear/fracture resistance and Al2O3...

Coated:NC3220,Designation:CCMT09T302-HMP NC3220 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.07~0.22,ap (mm):0.10~2.00

Coated:PC9030,Designation:CCMT09T302-HMP PC9030 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.07~0.22,ap (mm):0.10~2.00 Workpiece:Stainless steel:Interrupted cutting   PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel....

Cermet:CN2000,Designation:CCMT09T304-C25 CN2000 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00

Coated:PC9030,Designation:CCMT09T304-C25 PC9030 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00 Workpiece:Stainless steel:Interrupted cutting   PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel....

Coated:CC115,Designation:CCMT09T304-HMP CC115 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00

Coated:NC3020 ,Designation:CCMT09T304-HMP NC3020  Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00

Coated:NC3030,Designation:CCMT09T304-HMP NC3030 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030Features: Harmony between substrate with excellent wear/fracture resistance and Al2O3...

Coated:NC3120,Designation:CCMT09T304-HMP NC3120 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00 Workpiece:Steel:General cutting NC3120Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with...

Coated:NC3220,Designation:CCMT09T304-HMP NC3220 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00

Coated:NC6110,Designation:CCMT09T304-HMP NC6110 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00

Coated:PC5300,Designation:CCMT09T304-HMP PC5300 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00 Workpiece:Stainless steel:General cutting,Heat resistant alloy, Titanium alloy:General cutting Advanced PVD coating with high hardness...

Coated:PC9030,Designation:CCMT09T304-HMP PC9030 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00 Workpiece:Stainless steel:Interrupted cutting   PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel....

Coated:NC3020,Designation:CCMT09T308-HMP NC3020 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.10~0.30,ap (mm):0.50~3.00

Coated:NC3030,Designation:CCMT09T308-HMP NC3030 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.10~0.30,ap (mm):0.50~3.00 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030Features: High chipping and welding resistance for stable machining. Harmony...

Coated:NC3120,Designation:CCMT09T308-HMP NC3120 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.10~0.30,ap (mm):0.50~3.00 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate...

Coated:NC3120,Designation:CCMT120404-C25 NC3120 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.09~0.27,ap (mm):0.30~3.60 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate...

Coated:NC3020,Designation:CCMT120404-HMP NC3020 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.09~0.27,ap (mm):0.30~3.60

Coated:NC3030,Designation:CCMT120404-HMP NC3030 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.09~0.27,ap (mm):0.30~3.60 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030Features: High chipping and welding resistance for stable machining. Harmony...

Coated:NC3120,Designation:CCMT120404-HMP NC3120 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.09~0.27,ap (mm):0.30~3.60 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate...

Coated:NC6110,Designation:CCMT120404-HMP NC6110 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.09~0.27,ap (mm):0.30~3.60

Coated:PC9030,Designation:CCMT120404-HMP PC9030 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.09~0.27,ap (mm):0.30~3.60 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN...

Coated:NC6210,Designation:CCMT120408-C25 NC6210 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.24~0.36,ap (mm):1.00~3.60

Coated:NC3020,Designation:CCMT120408-HMP NC3020 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.24~0.36,ap (mm):1.00~3.60

Coated:NC3030,Designation:CCMT120408-HMP NC3030 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.24~0.36,ap (mm):1.00~3.60 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030Features: High chipping and welding resistance for stable machining. Harmony...

Coated:NC3120,Designation:CCMT120408-HMP NC3120 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.24~0.36,ap (mm):1.00~3.60 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate...

Coated:PC9030,Designation:CCMT120408-HMP PC9030 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.24~0.36,ap (mm):1.00~3.60 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN...

Coated:MP735 Designation:CNMG120408-MS MP735 RE:0.8, Rhombic,80° First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the cutting resistance and reduces vibration and chip jamming even at...

Coated:UE6120 Designation:CNMG120408-MA UE6120 RE:0.8, Rhombic,80° First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.