Korloy WNMG

Coated:NC3225,Designation:WNMG080412-MP NC3225 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.15~0.50,ap (mm):0.50~4.50 Workpiece:Steel:General cutting NC3225: ● Universal grade especially for machining forged automobile components and bearing steel both...

Coated:PC9030,Designation:WNMG080412-HS PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Coated:PC9030,Designation:WNMG080408-HS PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Coated:PC5300,Designation:WNMG080408-HS PC5300 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative PC5300:Workpiece:Stainless steel:General cutting,Heat resistant alloy, Titanium alloy:General cutting, PC5300 Universal PVD grade ● Advanced PVD coating with high hardness and high...

Coated:PC9030,Designation:WNMG080408-HM PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...

Coated:NC3120,Designation:WNMG080408-HM NC3120 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00

Coated:NC3020,Designation:WNMG080408-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00

Coated:PC9030,Designation:WNMG080408-HA PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.40,ap (mm):0.80~3.50 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...

Coated:NC3020,Designation:WNMG080408-HA NC3020 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.40,ap (mm):0.80~3.50

Uncoated:H01 ,Designation:WNMG080408-HA H01  Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.40,ap (mm):0.80~3.50 H01:Workpiece:Cast iron:Continuous cutting,Non-ferrous metal:Continuous cutting,Heat resistant alloy, Titanium alloy:Continuous cutting,Hardened steel:Continuous cutting Uncoated carbide grades for...

Coated:PC9030,Designation:WNMG080408-GS PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Coated:NC6210,Designation:WNMG080408-GR NC6210 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.20~0.50,ap (mm):1.00~7.00

Coated:NC6110,Designation:WNMG080408-GR NC6110 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.20~0.50,ap (mm):1.00~7.00

Coated:NC3020,Designation:WNMG080408-B25 NC3020 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.23~0.60,ap (mm):1.50~5.00

Coated:PC9030,Designation:WNMG080404-HS PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Coated:PC5300,Designation:WNMG080404-HS PC5300 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative PC5300:Workpiece:Stainless steel:General cutting,Heat resistant alloy, Titanium alloy:General cutting, PC5300 Universal PVD grade ● Advanced PVD coating with high hardness and high...

Coated:PC9030,Designation:WNMG080404-HM PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.15~0.42,ap (mm):0.50~4.20 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...

Coated:NC6110,Designation:WNMG080404-HM NC6110 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.15~0.42,ap (mm):0.50~4.20

Coated:NC3120,Designation:WNMG080404-HM NC3120 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.15~0.42,ap (mm):0.50~4.20 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with chipping...

Coated:NC3030,Designation:WNMG080404-HM NC3030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.15~0.42,ap (mm):0.50~4.20 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030 Features: High chipping and welding resistance for stable machining. Harmony between...

Coated:NC3020,Designation:WNMG080404-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.15~0.42,ap (mm):0.50~4.20

Coated:PC9030,Designation:WNMG080404-HA PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.05~0.30,ap (mm):0.80~3.50 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...

Coated:NC3020,Designation:WNMG080404-HA NC3020 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.05~0.30,ap (mm):0.80~3.50

Uncoated:H01,Designation:WNMG080404-HA H01 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.05~0.30,ap (mm):0.80~3.50 H01:Workpiece:Cast iron:Continuous cutting,Non-ferrous metal:Continuous cutting,Heat resistant alloy, Titanium alloy:Continuous cutting,Hardened steel:Continuous cutting Uncoated carbide grades for...

Coated:PC9030,Designation:WNMG080404-GS PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Coated:PC5300,Designation:WNMG080404-GS PC5300 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative PC5300:Workpiece:Stainless steel:General cutting,Heat resistant alloy, Titanium alloy:General cutting, PC5300 Universal PVD grade ● Advanced PVD coating with high hardness and high...

Coated:PC9030,Designation:WNMG060408-HS PC9030 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Coated:NC3020,Designation:WNMG060408-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~4.00

Coated:PC9030,Designation:WNMG060404-HS PC9030 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Coated:NC3020,Designation:WNMG060404-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.15~0.43,ap (mm):0.42~3.00