Korloy CCGT

Uncoated:H01,Designation:CCGT060202-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.01~0.12,ap (mm):0.05~3.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear resistance...

Uncoated:H01,Designation:CCGT060204-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.15,ap (mm):0.10~3.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT060208-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.20,ap (mm):0.10~4.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT09T302-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.20,ap (mm):0.05~3.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear resistance...

Uncoated:H01,Designation:CCGT09T304-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.30,ap (mm):0.10~5.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT09T308-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.03~0.50,ap (mm):0.10~5.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT120402-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.30,ap (mm):0.05~4.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT120404-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.03~0.50,ap (mm):0.10~5.00 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:CCGT120408-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:12.7,t:4.76,d1:5.5 Rhombic 80° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.04~0.80,ap (mm):0.10~5.50 Workpiece:Non-ferrous metal:General cutting  Uncoated carbide grades for turning application of titanium ● Increased wear...