Korloy TCMT

Coated:PC9030,Designation:TCMT16T304-C25 PC9030 Turning Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.28,ap (mm):0.80~3.00 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN...

Coated:PC9030,Designation:TCMT16T308-HMP PC9030 Turning Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.10~0.30,ap (mm):0.50~3.00 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN...

Coated:NC3120,Designation:TCMT16T308-HMP NC3120 Turning Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.10~0.30,ap (mm):0.50~3.00 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate...

Coated:NC3020,Designation:TCMT16T308-HMP NC3020 Turning Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.10~0.30,ap (mm):0.50~3.00

Coated:PC9030,Designation:TCMT16T304-HMP PC9030 Turning Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN...

Coated:NC3030,Designation:TCMT16T304-HMP NC3030 Turning Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030 Features: High chipping and welding resistance for stable machining....

Coated:NC3020,Designation:TCMT16T304-HMP NC3020 Turning Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.08~0.23,ap (mm):0.30~3.00

Coated:PC9030,Designation:TCMT110204-HMP PC9030 Turning Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.19,ap (mm):0.20~2.50 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN...

Coated:NC3020,Designation:TCMT110204-HMP NC3020 Turning Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.19,ap (mm):0.20~2.50

Coated:NC3030,Designation:TCMT110204-HMP NC3030 Turning Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.19,ap (mm):0.20~2.50 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030 Features: High chipping and welding resistance for stable machining....

Coated:NC3020,Designation:TCMT110204-HMP NC3020 Turning Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.19,ap (mm):0.20~2.50

Coated:NC3020,Designation:TCMT090204-HMP NC3020 Turning Insert (Positive) Dimensions (mm):d:5.56,t:2.38,d1:2.5 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.17,ap (mm):0.20~2.30  

Coated:PC9030,Designation:TCMT090204-C25 PC9030 Turning Insert (Positive) Dimensions (mm):d:5.56,t:2.38,d1:2.5 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.06~0.18,ap (mm):0.40~2.50 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN...