Korloy VNMG

Coated:NC3020,Designation:VNMG160412-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative Cutting Condition:fn (mm/rev):0.10~0.60,ap (mm):1.00~4.00

Coated:PC9030,Designation:VNMG160408-HS PC9030 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate adopted....

Coated:PC9030,Designation:VNMG160408-HM PC9030 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative Cutting Condition:fn (mm/rev):0.20~0.45,ap (mm):0.80~4.50 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra...

Coated:NC3120,Designation:VNMG160408-HM NC3120 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative Cutting Condition:fn (mm/rev):0.20~0.45,ap (mm):0.80~4.50 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with chipping resistance...

Coated:NC3030,Designation:VNMG160408-HM NC3030 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative Cutting Condition:fn (mm/rev):0.20~0.45,ap (mm):0.80~4.50 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030 Features: High chipping and welding resistance for stable machining. Harmony between substrate...

Coated:NC3020,Designation:VNMG160408-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative Cutting Condition:fn (mm/rev):0.20~0.45,ap (mm):0.80~4.50

Uncoated:H01,Designation:VNMG160408-HA H01 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative H01:Workpiece:Cast iron:Continuous cutting,Non-ferrous metal:Continuous cutting,Heat resistant alloy,Titanium alloy:Continuous cutting,Hardened steel:Continuous cutting Uncoated carbide grades for turning application of titanium ● Increased...

Coated:PC9030,Designation:VNMG160404-HS PC9030 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate adopted....

Coated:NC3020,Designation:VNMG160404-HS NC3020 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative

Coated:PC9030,Designation:VNMG160404-HM PC9030 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative Cutting Condition:fn (mm/rev):0.13~0.40,ap (mm):0.80~3.80 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra...

Coated:NC3030,Designation:VNMG160404-HM NC3030 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative Cutting Condition:fn (mm/rev):0.13~0.40,ap (mm):0.80~3.80 Workpiece:Steel:Interrupted cutting,Stainless steel:General cutting NC3030 Features: High chipping and welding resistance for stable machining. Harmony between substrate...

Coated:NC3020,Designation:VNMG160404-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative Cutting Condition:fn (mm/rev):0.13~0.40,ap (mm):0.80~3.80

Uncoated:H01,Designation:VNMG160404-HA H01 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81  Rhombic 35° Negative H01:Workpiece:Non-ferrous metal:General cutting Uncoated carbide grades for turning application of titanium ● Increased wear resistance and chipping resistance with the use...