Korloy VNMG160408-HS PC9030 (ANSI VNMG 332-HS) PVD Carbide Insert for Stainless Steel Finishing (10pcs)
30-Day Free Returns
Free Worldwide Shipping
The Original Korloy VNMG160408-HS PC9030 (ANSI Cross Reference: VNMG 332-HS) is a high-stability 35° Rhombic Negative Insert optimized for Semi-Finishing and Finishing of Stainless Steel. Featuring a reinforced 0.8mm (1/32") Corner Radius, this insert offers superior edge strength compared to the R0.4 version, allowing for higher feed rates and better resistance to chipping in interrupted cuts. The HS Sharp Breaker coupled with PC9030 PVD Grade ensures exceptional anti-adhesion performance in gummy materials like 316 and 304 stainless steel.
Reinforced Precision: The R0.8 radius design is the ideal choice for finishing operations where the depth of cut varies or where the workpiece surface has minor irregularities. It provides a stable "bite" into the material, reducing the risk of edge vibration and thermal cracking.
Technical Specifications (Metric & ANSI):
| ISO Designation | VNMG 160408-HS |
| ANSI Designation | VNMG 332-HS |
| Inscribed Circle (IC) | 9.525 mm / (3/8") |
| Thickness (S) | 4.76 mm / (3/16") |
| Corner Radius (r) | 0.8 mm / (1/32") |
| Grade | PC9030 (Premium PVD Coated) |
| Target Materials | Stainless Steel (M), Titanium, HRSA (S) |
Core Performance Benefits:
- High-Stability HS Geometry: The sharp rake angle reduces cutting resistance and heat generation, which is critical for maintaining dimensional accuracy in stainless steel.
- PC9030 PVD Coating: A high-hardness TiAlN layer prevents Built-Up Edge (BUE) and offers extreme resistance to the chemical wear typical of machining exotic alloys.
- Improved Heat Dissipation: The R0.8 radius provides more contact area at the tip, helping to carry heat away from the cutting zone and extending tool life during long profiling cycles.
- Versatile Chip Control: Effectively breaks chips in ductile materials at feed rates between 0.10 and 0.25 mm/rev, preventing "bird-nesting" around the tool holder.
Recommended Cutting Parameters:
| Workpiece Material | Cutting Speed (Vc) | Feed Rate (fn) | Depth of Cut (ap) |
|---|---|---|---|
| Stainless Steel (316L) | 90 - 170 m/min | 0.10 - 0.25 mm/rev | 0.3 - 2.0 mm |
| Inconel / Monel | 30 - 60 m/min | 0.08 - 0.18 mm/rev | 0.2 - 1.2 mm |
Compatible Tooling:
- External Turning: MVJNR / MVVNN / DVLNR Series (Size 16)
- Internal Boring Bars: S32U-MVQNR16 / S40V-MVUNR16
HS vs. HM: Choosing the Right Breaker
Best for light cuts where you need to minimize cutting pressure and prevent the material from hardening. Prioritizes surface finish.
Best for general-purpose profiling and slightly deeper cuts. A more versatile "workhorse" chipbreaker for varied batches.
Packaging: 10 pieces per box.