Mitsubishi WNMG

1.Insert Shape:Trigon               2.Normal Clearance:0°
3.Tolerance Class:    Tolerance of Nose Height M (mm) :±0.08-±0.18   
Tolerance of Inscribed Circle IC (mm):±0.05-±0.15
    Tolerance of Thickness S (mm):±0.13
4.Fixing and/or for Chip Breaker:     Hole:With Hole    
     Hole Configuration:Cylindrical Hole      Chip Breaker:Double Sided
Sort by:
WNMG060404-MA US735 (10pcs)

WNMG060404-MA US735 (10pcs)

$40.83 USD
Coated:US735  Designation:WNMG060404-MA US735 RE:0.4, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080412-GH UE6120 (10pcs)

WNMG080412-GH UE6120 (10pcs)

$38.89 USD
Coated :UE6120Designation:WNMG080412-GH UE6120 RE:1.2, Rhombic,80° Alternative chip breaker for rough cutting of carbon steel, alloy steel and cast iron For interrupted cuts and removing scale.A combination of wide land and...
WNMG080416-RS MP9015 (10pcs)

WNMG080416-RS MP9015 (10pcs)

$37.96 USD
Coated:MP9015 Designation:WNMG080416-RS MP9015 RE:1.6, Rhombic,80° Heat-resistant Alloy, Titanium Alloy:General Cutting First recommendation for rough cutting of difficultto-cut materials.Alternative chip breaker for rough cutting of stainless steels.Positive land increases welding resistance...
WNMG080412-RP MC6015 (10pcs)

WNMG080412-RP MC6015 (10pcs)

$37.96 USD
Coated:MC6015 Designation:WNMG080412-RP MC6015 RE:1.2, Rhombic,80° Steel:General Cutting First recommendation for rough cutting of carbon steel and alloy steel.For interrupted cuts and removing scale.Good balance of cutting edge strength and low...
WNMG080412-MA MP7035 (10pcs)

WNMG080412-MA MP7035 (10pcs)

$37.59 USD
Coated:MP7035 Designation:WNMG080412-MA MP7035 RE:1.2,Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080412-MA MC6025 (10pcs)

WNMG080412-MA MC6025 (10pcs)

$37.96 USD
Coated:MC6025 Designation:WNMG080412-MA MC6025 RE:1.2,Rhombic,80° Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080412-MA MC7025 (10pcs)

WNMG080412-MA MC7025 (10pcs)

$38.52 USD
Coatedt:MC7025 Designation:WNMG080412-MA MC7025 RE:1.2, Rhombic,80° Stainless Steel:General Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080412 MM MC7025 (10pcs)

WNMG080412 MM MC7025 (10pcs)

$38.52 USD
Coatedt:MC7025 Designation:WNMG080412 MM MC7025 RE:1.2, Rhombic,80° Stainless Steel:General Cutting First recommendation for medium cutting of stainless steel.Optimized land geometry by simulation analysis technology controls the plastic deformation of the corner...
WNMG080408-SA UE6110 (10pcs)

WNMG080408-SA UE6110 (10pcs)

$37.59 USD
Coated:UE6110  Designation:WNMG080408-SA UE6110 RE:0.8, Rhombic,80° Steel:General Cutting Alternative chipbreaker for light cutting of carbon steel and alloy steel.Superior chip control at small depth of cuts.Covers copying and back turning with...
WNMG080412-MA UE6020 (10pcs)

WNMG080412-MA UE6020 (10pcs)

$38.89 USD
Coated :UE6020 Designation:WNMG080412-MA UE6020 RE:1.2, Rhombic,80° Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080412-GH UE6020 (10pcs)

WNMG080412-GH UE6020 (10pcs)

$38.89 USD
Coated :UE6020 Designation:WNMG080412-GH UE6020 RE:1.2, Rhombic,80° Steel:Unstable Cutting Alternative chip breaker for rough cutting of carbon steel, alloy steel and cast iron For interrupted cuts and removing scale.A combination of...
WNMG080408-SA UE6020 (10pcs)

WNMG080408-SA UE6020 (10pcs)

$37.59 USD
Coated :UE6020 Designation:WNMG080408-SA UE6020 RE:0.8, Rhombic,80° Steel:Unstable Cutting Alternative chipbreaker for light cutting of carbon steel and alloy steel.Superior chip control at small depth of cuts.Covers copying and back turning...
WNMG080412-RP MC6035 (10pcs)

WNMG080412-RP MC6035 (10pcs)

$39.81 USD
Coated:MC6035 Designation:WNMG080412-RP MC6035 RE:0.8, Rhombic,80° Steel:Unstable Cutting First recommendation for rough cutting of carbon steel and alloy steel.For interrupted cuts and removing scale.Good balance of cutting edge strength and low...
WNMG080408-RP MC6035 (10pcs)

WNMG080408-RP MC6035 (10pcs)

$39.81 USD
Coated:MC6035 Designation:WNMG080408-RP MC6035 RE:0.8, Rhombic,80° Steel:Unstable Cutting First recommendation for rough cutting of carbon steel and alloy steel.For interrupted cuts and removing scale.Good balance of cutting edge strength and low...
WNMG080412-GK MC5015 (10pcs)

WNMG080412-GK MC5015 (10pcs)

$38.89 USD
Coated:MC5015 Designation:WNMG080412-GK MC5015 RE:1.2, Rhombic,80° Cast Iron:General Cutting Alternative chip breaker for medium cutting for cast iron.Breakers are suitable for a wide range of applications.Maintenance of high stability by the...
WNMG080408-RK MC5015 (10pcs)

WNMG080408-RK MC5015 (10pcs)

$39.47 USD
Coated:MC5015 Designation:WNMG080408-RK MC5015 RE:0.8, Rhombic,80° Cast Iron:General Cutting For rough cutting of carbon steel, alloy steel and First recommendation for rough cutting cast iron.Seating surface and wide land 3 or...
WNMG080412-MA VP15TF (10pcs)

WNMG080412-MA VP15TF (10pcs)

$37.96 USD
Coated:VP15TF Designation:WNMG080412-MA VP15TF RE:1.2, Rhombic,80° Steel:Unstable Cutting,Stainless Steel:Unstable Cutting,Cast Iron:Unstable Cutting,Heat-resistant Alloy, Titanium Alloy:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive...
WNMG080412 VP15TF (10pcs)

WNMG080412 VP15TF (10pcs)

$37.96 USD
Coated:VP15TF Designation:WNMG080412 VP15TF RE:1.2, Rhombic,80° Steel:Unstable Cutting,Stainless Steel:Unstable Cutting,Cast Iron:Unstable Cutting,Heat-resistant Alloy, Titanium Alloy:Unstable Cutting
WNMG080412-MW UC5115 (10pcs)

WNMG080412-MW UC5115 (10pcs)

$41.67 USD
Coated :UC5115  Designation: WNMG080412-MW UC5115 RE:1.2, Rhombic,80° Cast Iron:General Cutting Wiper insert for medium cutting carbon steel, alloy steel, stainless steel and cast iron.The wiper allows up to two times...
WNMG080412-GH UC5115 (10pcs)

WNMG080412-GH UC5115 (10pcs)

$37.59 USD
Coated :UC5115  Designation: WNMG080412-GH UC5115 RE:1.2, Rhombic,80° Cast Iron:General Cutting Alternative chip breaker for rough cutting of carbon steel, alloy steel and cast iron For interrupted cuts and removing scale.A...
WNMG080412 UC5115 (10pcs)

WNMG080412 UC5115 (10pcs)

$37.59 USD
Coated :UC5115  Designation: WNMG080412 UC5115 RE:1.2, Rhombic,80° Cast Iron:General Cutting
WNMG080408-MW UC5115 (10pcs)

WNMG080408-MW UC5115 (10pcs)

$43.75 USD
Coated :UC5115  Designation: WNMG080408-MW UC5115 RE:0.8, Rhombic,80° Cast Iron:General Cutting Wiper insert for medium cutting carbon steel, alloy steel, stainless steel and cast iron.The wiper allows up to two times...
WNMG080412-MS US735 (10pcs)

WNMG080412-MS US735 (10pcs)

$37.59 USD
Coated:US735  Designation:WNMG080412-MS US735 RE:1.2, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the cutting resistance and reduces vibration and chip...
WNMG080412-MA US735 (10pcs)

WNMG080412-MA US735 (10pcs)

$38.52 USD
Coated:US735  Designation:WNMG080412-MA US735 RE:1.2, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.  
WNMG080404-MA MP735 (10pcs)

WNMG080404-MA MP735 (10pcs)

$39.86 USD
Coated :MP735 Designation:WNMG080404-MA MP735 RE:0.4, Rhombic,80° First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080404-MA UE6120 (10pcs)

WNMG080404-MA UE6120 (10pcs)

$39.86 USD
Coated :UE6120Designation:WNMG080404-MA UE6120 RE:0.4, Rhombic,80° First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080404-MS MP735 (10pcs)

WNMG080404-MS MP735 (10pcs)

$39.92 USD
Coated :MP735Designation:WNMG080404-MS MP735 RE:0.4, Rhombic,80° First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the cutting resistance and reduces vibration and chip jamming even at...
WNMG080408-GH UE6120 (10pcs)

WNMG080408-GH UE6120 (10pcs)

$40.83 USD
Coated :UE6120Designation:WNMG080408-GH UE6120 RE:0.8, Rhombic,80° Alternative chip breaker for rough cutting of carbon steel, alloy steel and cast iron For interrupted cuts and removing scale.A combination of wide land and...
WNMG080408-MA MP735 (10pcs)

WNMG080408-MA MP735 (10pcs)

$39.86 USD
Coated:MP735 Designation:WNMG080408-MA MP735 RE:0.8, Rhombic,80° Steel:General Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080408-MA UE6120 (10pcs)

WNMG080408-MA UE6120 (10pcs)

$40.44 USD
Coated:UE6120 Designation:WNMG080408-MA UE6120 RE:0.8, Rhombic,80° First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080408-MS MP735 (10pcs)

WNMG080408-MS MP735 (10pcs)

$40.25 USD
Coated:MP735Designation:WNMG080408-MS MP735 RE:0.8, Rhombic,80° First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the cutting resistance and reduces vibration and chip jamming even at large...
WNMG080408-MS VP15TF (10pcs)

WNMG080408-MS VP15TF (10pcs)

$39.47 USD
Coated:VP15TF Designation:WNMG080408-MS VP15TF RE:0.8, Rhombic,80° Steel:Unstable Cutting,Stainless Steel:Unstable Cutting,Cast Iron:Unstable Cutting,Heat-resistant Alloy, Titanium Alloy:Unstable Cutting First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the...
WNMG080408-MS US735 (10pcs)

WNMG080408-MS US735 (10pcs)

$39.47 USD
Coated:US735  Designation:WNMG080408-MS US735 RE:0.8, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the cutting resistance and reduces vibration and chip...
WNMG080408-MS US7020 (10pcs)

WNMG080408-MS US7020 (10pcs)

$39.47 USD
Coated:US7020  Designation:WNMG080408-MS US7020 RE:0.8, Rhombic,80° Stainless Steel:Stable Cutting First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the cutting resistance and reduces vibration and chip...
WNMG080408-MS UE6110 (10pcs)

WNMG080408-MS UE6110 (10pcs)

$39.86 USD
Coated:UE6110  Designation:WNMG080408-MS UE6110 RE:0.8, Rhombic,80° Steel:General Cutting First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the cutting resistance and reduces vibration and chip jamming...
WNMG080408-MP UE6110 (10pcs)

WNMG080408-MP UE6110 (10pcs)

$40.44 USD
Coated:UE6110  Designation:WNMG080408-MP UE6110 RE:0.8, Rhombic,80° Steel:General Cutting First recommendation for medium cutting of carbon steel and alloy steel Suitable for medium to light cutting.Breaker geometry appropriate for copying and back...
WNMG080408-MP UE6020 (10pcs)

WNMG080408-MP UE6020 (10pcs)

$40.44 USD
Coated :UE6020 Designation:WNMG080408-MP UE6020 RE:0.8, Rhombic,80° Steel:Unstable Cutting First recommendation for medium cutting of carbon steel and alloy steel Suitable for medium to light cutting.Breaker geometry appropriate for copying and...
WNMG080408-MP MC6025 (10pcs)

WNMG080408-MP MC6025 (10pcs)

$40.44 USD
Coated:MC6025 Designation:WNMG080408-MP MC6025 RE:0.8,Rhombic,80° Steel:Unstable Cutting First recommendation for medium cutting of carbon steel and alloy steel Suitable for medium to light cutting.Breaker geometry appropriate for copying and back turning.Cutting...
WNMG080408-MP MC6015 (10pcs)

WNMG080408-MP MC6015 (10pcs)

$39.47 USD
Coated:MC6015 Designation:WNMG080408-MP MC6015 RE:0.8, Rhombic,80° Steel:General Cutting First recommendation for medium cutting of carbon steel and alloy steel Suitable for medium to light cutting.Breaker geometry appropriate for copying and back...
WNMG080408-MM MC7025 (10pcs)

WNMG080408-MM MC7025 (10pcs)

$40.44 USD
Coatedt:MC7025 Designation:WNMG080408-MM MC7025 RE:0.8, Rhombic,80° Stainless Steel:General Cutting First recommendation for medium cutting of stainless steel.Optimized land geometry by simulation analysis technology controls the plastic deformation of the corner and...
WNMG080408-MK MC5015 (10pcs)

WNMG080408-MK MC5015 (10pcs)

$40.83 USD
Coated:MC5015 Designation:WNMG080408-MK MC5015 RE:0.8, Rhombic,80° Cast Iron:General Cutting First recommendation for medium cutting of cast iron.Optimum balance between sharpness and high edge strength for general use.
WNMG080408-MK MC5005 (10pcs)

WNMG080408-MK MC5005 (10pcs)

$40.83 USD
Coated:MC5005 Designation:WNMG080408-MK MC5005 RE:0.8, Rhombic,80° Cast Iron:Stable Cutting First recommendation for medium cutting of cast iron.Optimum balance between sharpness and high edge strength for general use.
WNMG080408-MA VP15TF (10pcs)

WNMG080408-MA VP15TF (10pcs)

$39.47 USD
Coated:VP15TF Designation:WNMG080408-MA VP15TF RE:0.8, Rhombic,80° Steel:Unstable Cutting,Stainless Steel:Unstable Cutting,Cast Iron:Unstable Cutting,Heat-resistant Alloy, Titanium Alloy:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive...
WNMG080408-MA US735 (10pcs)

WNMG080408-MA US735 (10pcs)

$39.47 USD
 Coated:US735  Designation:WNMG080408-MA US735  RE:0.8, Rhombic,80°  Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080408-MA UE6110 (10pcs)

WNMG080408-MA UE6110 (10pcs)

$41.22 USD
Coated:UE6110  Designation:WNMG080408-MA UE6110 RE:0.8, Rhombic,80° Steel:General Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080408-MA UC5115 (10pcs)

WNMG080408-MA UC5115 (10pcs)

$40.44 USD
Coated :UC5115  Designation: WNMG080408-MA UC5115 RE:0.8, Rhombic,80° Cast Iron:General Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action....
WNMG080408-MA MC6025 (10pcs)

WNMG080408-MA MC6025 (10pcs)

$39.47 USD
Coated:MC6025 Designation:WNMG080408-MA MC6025 RE:0.8,Rhombic,80° Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.
WNMG080408-MA MC5005 (10pcs)

WNMG080408-MA MC5005 (10pcs)

$41.22 USD
Coated:MC5005 Designation:WNMG080408-MA MC5005 RE:0.8, Rhombic,80° Cast Iron:Stable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.