KORLOY TCGT Turning Inserts – Polished Carbide Inserts for Finishing

Uncoated:H01,Designation:TCGT16T308-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.03~0.50,ap (mm):0.10~5.50 H01:Workpiece:Non-ferrous metal:General cutting Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:TCGT16T304-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.03~0.40,ap (mm):0.10~5.50 H01:Workpiece:Non-ferrous metal:General cutting Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:TCGT16T302-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:9.525,t:3.97,d1:4.4 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.30,ap (mm):0.05~5.00 H01:Workpiece:Non-ferrous metal:General cutting Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:TCGT110204-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.03~0.30,ap (mm):0.10~4.00 H01:Workpiece:Non-ferrous metal:General cutting Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:TCGT110202-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:6.35,t:2.38,d1:2.8 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.20,ap (mm):0.05~4.00 H01:Workpiece:Non-ferrous metal:General cutting Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:TCGT090204-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:5.56,t:2.38,d1:2.5 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.02~0.15,ap (mm):0.10~4.00 H01:Workpiece:Non-ferrous metal:General cutting Uncoated carbide grades for turning application of titanium ● Increased wear...

Uncoated:H01,Designation:TCGT090202-AK H01 Aluminum Insert (Positive) Dimensions (mm):d:5.56,t:2.38,d1:2.5 Triangular 60° Positive Relief Angle: 7° Cutting Condition:fn (mm/rev):0.01~0.12,ap (mm):0.05~3.00 H01:Workpiece:Non-ferrous metal:General cutting Uncoated carbide grades for turning application of titanium ● Increased wear...