Sort by:
VNMG160408MQ CA6525 (10pcs)

VNMG160408MQ CA6525 (10pcs)

$56.68 USD
CVD Coated Carbide:CA6525,  Designation: VNMG160408MQ CA6525 Corner Radius (in):1/32, Large rake angle and circular edge line.Low cutting force and good chip control.Stainless Steel:Light Interruption / 1st Choice,HRSA:Light Interruption / 2nd Choice,Color:Gold,...
Quick view Add to cart
VNMG160404MS CA6525 (10pcs)

VNMG160404MS CA6525 (10pcs)

$56.25 USD
CVD Coated Carbide:CA6525,  Designation: VNMG160404MS CA6525 Corner Radius (in):1/64,Superior cutting edge sharpness and strength achieved by a positive land. Extra strength of cutting edge inhibits damage from wall shouldering.Stainless Steel:Light Interruption...
Quick view Add to cart
VNMG160404MQ CA6525 (10pcs) - BEYOND

VNMG160404MQ CA6525 (10pcs)

$56.68 USD
CVD Coated Carbide:CA6525,  Designation: VNMG160404MQ CA6525 Corner Radius (in):1/64,Large rake angle and circular edge line.Low cutting force and good chip control.Stainless Steel:Light Interruption / 1st Choice,HRSA:Light Interruption / 2nd Choice,Color:Gold, Coating...
Quick view Add to cart
VNMG160404 CA5525 (10pcs)

VNMG160404 CA5525 (10pcs)

$54.54 USD
CVD Coated Carbide:CA5525,  Designation: VNMG160404 CA5525 Corner Radius (in):1/64,Carbon/Alloy Steel:Light Interruption / 2nd Choice,Color: Gold , Coating / Main Component:TiCN+Al2O3+TiN,Advantages: Application: For general machining of steel, roughing to interruption
Quick view Add to cart
VNMG160404HQ CA5515 (10pcs)

VNMG160404HQ CA5515 (10pcs)

$54.54 USD
CVD Coated Carbide:CA5515,  Designation: VNMG160404HQ CA5515 Corner Radius (in):1/64 ,Sharp cutting performance with 3-D rake angle and double projection design.Color:Gold, Coating / Main Component:TiCN+Al2O3+TiN,Advantages:Application: Machining of steel, continuous to light interruption...
Quick view Add to cart
VNMG160408HQ CA5515 (10pcs)

VNMG160408HQ CA5515 (10pcs)

$54.54 USD
CVD Coated Carbide:CA5515,  Designation: VNMG160408HQ CA5515 Corner Radius (in):1/32,Sharp cutting performance with 3-D rake angle and double projection design.Color:Gold, Coating / Main Component:TiCN+Al2O3+TiN,Advantages:Application: Machining of steel, continuous to light interruption
Quick view Add to cart
VNMG160408 CA5515 (10pcs)

VNMG160408 CA5515 (10pcs)

$56.25 USD
CVD Coated Carbide:CA5515,  Designation: VNMG160408 CA5515 Corner Radius (in):1/32,Color:Gold, Coating / Main Component:TiCN+Al2O3+TiN,Advantages:Application: Machining of steel, continuous to light interruption
Quick view Add to cart
VNMG160404 TN620 (10pcs)

VNMG160404 TN620 (10pcs)

$48.33 USD
Cermet:TN620,  Designation:VNMG160404 TN620 Corner Radius (in):1/64 ,Carbon/Alloy Steel:Light Interruption / 1st Choice,Color: Gray, Coating / Main Component:TiCN,Advantages:High wear resistance and chipping resistance cermet due to three hybrid technology attributes,Application: Cermet...
Quick view Add to cart
VNMG160404 PV720 (10pcs)

VNMG160404 PV720 (10pcs)

$54.97 USD
MEGA COAT Cermet:PV720,  Designation: VNMG160404 PV720 Corner Radius (in):1/64,Carbon/Alloy Steel:Light Interruption / 1st Choice Color:Gold, Coating / Main Component:TiCN(MEGACOAT NANO) ,Advantages:Superior wear and adhesion resistant MEGACOAT NANO on wear resistant, tough cermet,Application:...
Quick view Add to cart
VNMG160404MQ PR1125 (10pcs)

VNMG160404MQ PR1125 (10pcs)

$56.68 USD
PVD Coated Carbide:PR1115,  Designation:VNMG160404MQ PR1125 RE: 1/64,Large rake angle and circular edge line.Low cutting force and good chip control.Color:Purple Red , Coating / Main Component:TiAlN, Advantages:Superior oxidation resistance with well balanced wear resistance...
Quick view Add to cart
WBGT060102L-F KW10 (10pcs)

WBGT060102L-F KW10 (10pcs)

$80.66 USD
Carbide:KW10,  Designation: WBGT060102L-F KW10 RE: 0.008,Carbide:Light Interruption / 1st Choice,Non-ferrous Metals:Light Interruption / 1st Choice,Titanium Alloy:Light Interruption / 1st Choice, Color:Reddish Gray , Coating / Main Component:WC+Co, Advantages:ISO identification symbol K carbide...
Quick view Add to cart
WBGT060104L-F KW10 (10pcs)

WBGT060104L-F KW10 (10pcs)

$78.43 USD
Carbide:KW10,  Designation: WBGT060104L-F KW10 RE: 1/64,Carbide:Light Interruption / 1st Choice,Non-ferrous Metals:Light Interruption / 1st Choice,Titanium Alloy:Light Interruption / 1st Choice, Color:Reddish Gray , Coating / Main Component:WC+Co, Advantages:ISO identification symbol K carbide...
Quick view Add to cart
WBGT060102L-F PR930 (10pcs)

WBGT060102L-F PR930 (10pcs)

$88.51 USD
PVD Coated Carbide:PR930 ,  Designation: WBGT060102L-F PR930 Corner Radius(in) RE:0.008 , Carbon Steel / Alloy Steel:Light Interruption / 2nd Choice ,Stainless Steel:Light Interruption / 2nd Choice Color:Reddish Gray , Coating / Main Component:...
Quick view Add to cart
WBGT060104L-F PR930 (10pcs)

WBGT060104L-F PR930 (10pcs)

$88.51 USD
PVD Coated Carbide:PR930 ,  Designation: WBGT060104L-F PR930 Corner Radius(in) RE:1/64, Carbon Steel / Alloy Steel:Light Interruption / 2nd Choice ,Stainless Steel:Light Interruption / 2nd Choice Color:Reddish Gray , Coating / Main Component: iAlN...
Quick view Add to cart
WBGT060102L-F TN60 (10pcs)

WBGT060102L-F TN60 (10pcs)

$56.68 USD
Cermet:TN60 ,  Designation: WBGT060102L-F TN60 Corner Radius(in) RE:0.008 ,Color: Gray , Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption
Quick view Add to cart
WBGT060104L-F TN60 (10pcs)

WBGT060104L-F TN60 (10pcs)

$56.68 USD
Cermet:TN60 ,  Designation:WBGT060104L-F TN60 Corner Radius(in) RE:1/64,Color: Gray , Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption
Quick view Add to cart
WBGT080202L-F TN60 (10pcs)

WBGT080202L-F TN60 (10pcs)

$60.50 USD
Cermet:TN60 ,  Designation:WBGT080202L-F TN60 Corner Radius(in) RE:0.008,Color: Gray , Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption
Quick view Add to cart
WBGT080204L-F PR930 (10pcs)

WBGT080204L-F PR930 (10pcs)

$89.63 USD
PVD Coated Carbide:PR930 ,  Designation: WBGT080204L-F PR930 Corner Radius(in) RE:1/64, Carbon Steel / Alloy Steel:Light Interruption / 2nd Choice ,Stainless Steel:Light Interruption / 2nd Choice Color:Reddish Gray , Coating / Main Component: iAlN...
Quick view Add to cart
WBGT080204L-F TN6020 (10pcs)

WBGT080204L-F TN6020 (10pcs)

$73.49 USD
Cermet:TN6020,  Designation: WBGT080204L-F TN6020 Corner Radius(in) RE:1/64,Carbon/Alloy Steel:Light Interruption / 2nd Choice ,Color: Gray , Coating / Main Component: TiCN, Advantages:Application: Uncoated cermet for steel
Quick view Add to cart
WBMT060102L-DP CA5525 (10pcs) - BEYOND

WBMT060102L-DP CA5525 (10pcs)

$51.34 USD
CVD Coated Carbide:CA5525,  Designation: WBMT060102L-DP CA5525 Corner Radius (in):0.008 ,Carbon/Alloy Steel:Light Interruption / 2nd Choice,Color: Gold , Coating / Main Component:TiCN+Al2O3+TiN,Advantages: Application: For general machining of steel, roughing to interruption
Quick view Add to cart
WBMT060104L-DP CA5525 (10pcs)

WBMT060104L-DP CA5525 (10pcs)

$50.26 USD
CVD Coated Carbide:CA5525,  Designation: WBMT060104L-DP CA5525 Corner Radius (in):1/64,Carbon/Alloy Steel:Light Interruption / 2nd Choice,Color: Gold , Coating / Main Component:TiCN+Al2O3+TiN,Advantages: Application: For general machining of steel, roughing to interruption
Quick view Add to cart
WBMT080204L-DP CA5525 (10pcs)

WBMT080204L-DP CA5525 (10pcs)

$53.47 USD
CVD Coated Carbide:CA5525,Designation:WBMT080204L-DP CA5525 Corner Radius (in):1/64,Color:Gold Carbon/Alloy Steel:Light Interruption / 2nd Choice Coating / Main Component:TiCN+Al2O3+TiN, Advantages:Application: For general machining of steel, roughing to interruption
Quick view Add to cart
WBMT060102L-DP PR930 (10pcs)

WBMT060102L-DP PR930 (10pcs)

$63.87 USD
PVD Coated Carbide:PR930 ,  Designation: WBMT060102L-DP PR930 Corner Radius(in) RE:0.008 , Carbon Steel / Alloy Steel:Light Interruption / 2nd Choice ,Stainless Steel:Light Interruption / 2nd Choice Color:Reddish Gray , Coating / Main Component:...
Quick view Add to cart
WBMT060104L-DP PR930 (10pcs)

WBMT060104L-DP PR930 (10pcs)

$63.87 USD
PVD Coated Carbide:PR930,Designation: WBMT060104L-DP PR930 Corner Radius(in) RE:1/64, Carbon Steel / Alloy Steel:Light Interruption / 2nd Choice ,Stainless Steel:Light Interruption / 2nd Choice Color:Reddish Gray , Coating / Main Component: iAlN , Advantages:Application:...
Quick view Add to cart
WBMT060102L-DP TN60 (10pcs)

WBMT060102L-DP TN60 (10pcs)

$42.78 USD
Cermet:TN60 ,  Designation: WBMT060102L-DP TN60 Corner Radius(in) RE:0.008 ,Color: Gray , Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption
Quick view Add to cart
WBMT060104L-DP TN60 (10pcs)

WBMT060104L-DP TN60 (10pcs)

$42.78 USD
Cermet:TN60 ,  Designation: WBMT060104L-DP TN60 Corner Radius(in) RE:1/64,Color: Gray , Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption
Quick view Add to cart
WBMT080204L-DP PR930 (10pcs)

WBMT080204L-DP PR930 (10pcs)

$66.10 USD
PVD Coated Carbide:PR930, Designation: WBMT080204L-DP PR930 Corner Radius(in) RE:1/64, Carbon Steel / Alloy Steel:Light Interruption / 2nd Choice ,Stainless Steel:Light Interruption / 2nd Choice Color:Reddish Gray , Coating / Main Component: iAlN , Advantages:Application:...
Quick view Add to cart
WNMG060404HQ CA5525 (10pcs)

WNMG060404HQ CA5525 (10pcs)

$39.57 USD
CVD Coated Carbide:CA5525,Designation:WNMG060404HQ CA5525 ANSI:WNMG331HQ Corner Radius (in):1/64,Color:Gold Carbon/Alloy Steel:Light Interruption / 2nd Choice Coating / Main Component:TiCN+Al2O3+TiN, Advantages:Application: For general machining of steel, roughing to interruption HQ:Sharp cutting performance with...
Quick view Add to cart
WNMG060404HQ TN60 (10pcs)

WNMG060404HQ TN60 (10pcs)

$32.59 USD
Cermet:TN60,Designation:WNMG060404HQ TN60 ANSI:WNMG331HQ TN60 Corner Radius(in) RE:1/64,Color: Gray, Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption HQ:Sharp cutting performance with 3-D rake angle and double projection design. TURNING...
Quick view Add to cart
WNMG060408HQ CA5525 (10pcs) - BEYOND

WNMG060408HQ CA5525 (10pcs)

$39.79 USD
CVD Coated Carbide:CA5525,Designation:WNMG060408HQ CA5525 ANSI:WNMG332HQ Corner Radius (in):1/32,Color:Gold Carbon/Alloy Steel:Light Interruption / 2nd Choice Coating / Main Component:TiCN+Al2O3+TiN, Advantages:Application: For general machining of steel, roughing to interruption HQ:Sharp cutting performance with...
Quick view Add to cart
WNMG060408HQ TN60 (10pcs)

WNMG060408HQ TN60 (10pcs)

$32.59 USD
Cermet:TN60,Designation:WNMG060408HQ TN60 ANSI:WNMG332HQ Corner Radius(in) RE:1/32,Color: Gray, Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption HQ:Sharp cutting performance with 3-D rake angle and double projection design. TURNING INSERTS...
Quick view Add to cart
WNMG080402PP PV720 (10pcs)

WNMG080402PP PV720 (10pcs)

$44.91 USD
MEGA COAT Cermet:PV720,Designation:WNMG080402PP PV720 ANSI:WNMG4305PP Corner Radius (in):0.08,Carbon/Alloy Steel:Light Interruption / 1st Choice Color:Gold,Coating / Main Component:TiCN(MEGACOAT NANO) Advantages:Superior wear and adhesion resistant MEGACOAT NANO on wear resistant, tough cermet,Application: First...
Quick view Add to cart
WNMG080404 CA4515

WNMG080404 CA4515 (10pcs)

$42.78 USD
CVD Coated Carbide:CA4515,Designation:WNMG080404 CA4515 ANSI:WNMG431 CA4515 Corner Radius (in):1/64 Color:Blackish Gray,Coating Layer:Thick Coating, Coating / Main Component:TiCN+Al2O3, Density:15.0,Hardness of Substrate:(HV):1.570,(GPa):15.4, Fracture Toughness (MPam1/2):12.0,Flexural Toughness (MPa):2.780   Advantages:Stable, longer tool life due to improved...
Quick view Add to cart
WNMG080404 PR1125 (10pcs)

WNMG080404 PR1125 (10pcs)

$42.35 USD
CVD Coated Carbide:PR1125,Designation:WNMG080404 PR1125  ANSI:WNMG431 PR1125 Corner Radius (in):1/64 Color:Purple Red,Coating Layer:Thick Coating, Coating / Main Component:TiAlN Advantages:Hard TiAlN base PVD coated super micro-grain carbide, superior toughness and heat resistance  Application: Finishing...
Quick view Add to cart
WNMG080404 TN60 (10pcs)

WNMG080404 TN60 (10pcs)

$39.57 USD
Cermet:TN60,Designation:WNMG080404 TN60 ANSI:WNMG431 CA4515  Corner Radius(in) RE:1/64,Color: Gray, Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption TURNING INSERTS (NEGATIVE)
Quick view Add to cart
WNMG080404CQ CA515 (10pcs)

WNMG080404CQ CA515 (10pcs)

$43.85 USD
CVD Coated Carbide:CA515,Designation:WNMG080404CQ CA515 ANSI:WNMG431 CA515 Carbon/Alloy Steel: Continuous / 1st Choice Corner Radius(in) RE:1/64,Color: Gold, Coating / Main Component: TiCN+Al2O3+TiN Advantages:Improved wear resistance and stability due to special substrate with heat...
Quick view Add to cart
WNMG080404CQ CA5515 (10pcs)

WNMG080404CQ CA5515 (10pcs)

$43.42 USD
CVD Coated Carbide:CA5515,Designation:WNMG080404CQ CA5515 ANSI:WNMG431CQ CA5515 Corner Radius(in) RE:1/64,Color: Gold, Coating / Main Component: TiCN+Al2O3+TiN Advantages:Application: Machining of steel, continuous to light interruption CQ:Good chip control at various D.O.C. such as...
Quick view Add to cart
WNMG080404CQ CA5525 (10pcs)

WNMG080404CQ CA5525 (10pcs)

$42.78 USD
CVD Coated Carbide:CA5525,Designation:WNMG080404CQ CA5525 ANSI:WNMG431 CA5525 Carbon/Alloy Steel:Light Interruption / 2nd Choice Corner Radius(in) RE:1/64,Color: Gold, Coating / Main Component: TiCN+Al2O3+TiN Advantages:Application: For general machining of steel, roughing to interruption CQ:Good...
Quick view Add to cart
WNMG080404GS CA5525 (10pcs)

WNMG080404GS CA5525 (10pcs)

$42.78 USD
CVD Coated Carbide:CA5525,Designation:WNMG080404GS CA5525 ANSI:WNMG431 CA5525 Carbon/Alloy Steel:Light Interruption / 2nd Choice Corner Radius(in) RE:1/64,Color: Gold, Coating / Main Component: TiCN+Al2O3+TiN Advantages:Application: For general machining of steel, roughing to interruption GS:Strong...
Quick view Add to cart
WNMG080404HQ CA5515 (10pcs)

WNMG080404HQ CA5515 (10pcs)

$42.78 USD
CVD Coated Carbide:CA5515,Designation:WNMG080404HQ CA5515 ANSI:WNMG431HQ CA5515 Corner Radius(in) RE:1/64,Color: Gold, Coating / Main Component: TiCN+Al2O3+TiN Advantages:Application: For general machining of steel, roughing to interruption HQ: Sharp cutting performance with 3-D rake...
Quick view Add to cart
WNMG080404HQ CA6525 (10pcs)

WNMG080404HQ CA6525 (10pcs)

$42.78 USD
CVD Coated Carbide:CA6525,Designation:WNMG080404HQ CA6525 ANSI:WNMG431HQ CA6525,Stainless Steel:Light Interruption / 1st Choice HRSA:Light Interruption / 2st Choice Corner Radius(in) RE:1/64,Color: Gold, Coating / Main Component: TiCN+Al2O3+TiN Advantages:Specialized carbide substrate for machining stainless...
Quick view Add to cart
WNMG080404HQ PR1125 (10pcs) - BEYOND

WNMG080404HQ PR1125 (10pcs)

$42.35 USD
PVD Coated Carbide:PR1125,Designation:WNMG080404HQ PR1125 ANSI:WNMG431HQ PR1125 Stainless Steel:Light Interruption / 2nd Choice HRSA:Light Interruption / 2nd Choice Corner Radius(in) RE:1/64,Color: Purple Red Coating / Main Component: TiAlN Advantages:Hard TiAlN base PVD coated...
Quick view Add to cart
WNMG080404HQ TN60 (10pcs)

WNMG080404HQ TN60 (10pcs)

$40.63 USD
Cermet:TN60 ,Designation:WNMG080404HQ TN60  ANSI:WNMG431HQ TN60  Corner Radius(in) RE:1/64,Color: Gray, Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption HQ:Sharp cutting performance with 3-D rake angle and double projection design...
Quick view Add to cart
WNMG080404HQ TN620 (10pcs)

WNMG080404HQ TN620 (10pcs)

$39.57 USD
Cermet:TN620,Designation:WNMG080404HQ TN620 ANSI:WNMG431HQ TN620 Carbon/Alloy Steel:Light Interruption / 1st Choice Corner Radius(in) RE:1/64,Color:Gray Coating / Main Component: TiCN Advantages:High wear resistance and chipping resistance cermet due to three hybrid technology...
Quick view Add to cart
WNMG080404HS CA5525 (10pcs)

WNMG080404HS CA5525 (10pcs)

$49.19 USD
CVD Coated Carbide:CA5525,Designation:WNMG080404HS CA5525 ANSI:WNMG431HS CA5525 Corner Radius(in) RE:1/64,Color: Gold, Coating / Main Component: TiCN+Al2O3+TiN Advantages:Application: For general machining of steel, roughing to interruption HS:General purpose chipbreaker.Applicable for copying. TURNING INSERTS...
Quick view Add to cart
WNMG080404MQ CA6525 (10pcs)

WNMG080404MQ CA6525 (10pcs)

$42.78 USD
CVD Coated Carbide:CA6525,Designation:WNMG080404MQ CA6525 ANSI:WNMG431MQ CA6525 Corner Radius(in) RE:1/64,Color: Gold, Coating / Main Component: TiCN+Al2O3+TiN Advantages:Specialized carbide substrate for machining stainless steel with excellent notching resistance and toughness Application: First choice...
Quick view Add to cart
WNMG080404MS CA6525 (10pcs)

WNMG080404MS CA6525 (10pcs)

$42.78 USD
CVD Coated Carbide:CA6525,Designation:WNMG080404MS CA6525 ANSI:WNMG431MS CA6525 Corner Radius(in) RE:1/64,Color: Gold, Coating / Main Component: TiCN+Al2O3+TiN Advantages:Specialized carbide substrate for machining stainless steel with excellent notching resistance and toughness Application: First choice...
Quick view Add to cart
WNMG080404MS PR1125 (10pcs)

WNMG080404MS PR1125 (10pcs)

$42.35 USD
PVD Coated Carbide:PR1125,Designation:WNMG080404MS PR1125 ANSI:WNMG431MS PR1125 Stainless Steel:Light Interruption / 2nd Choice HRSA:Light Interruption / 2nd Choice Corner Radius(in) RE:1/64,Color: Purple Red Coating / Main Component: TiAlN Advantages:Hard TiAlN base PVD...
Quick view Add to cart

Premium Carbide Inserts Collection | Sandvik, Iscar, Tungaloy, BEYOND & More

Global Brand Carbide Inserts Collection

High-Performance CNC Cutting Solutions for Global Industry

Which carbide insert grade provides the longest tool life for high-speed alloy steel turning?

Finding the perfect balance between hardness and toughness is the key to CNC efficiency. Our Carbide Insert Collection brings together the world's leading manufacturers—including Sandvik, Iscar, Tungaloy, Kyocera, and BEYOND—under one platform. Whether you require a specialized CVD-coated grade for heavy roughing or a PVD-coated sharp edge for stainless steel finishing, our inventory covers the entire ISO spectrum. Each insert features advanced chipbreaker geometries designed to manage heat and ensure smooth chip evacuation in the most demanding environments.

Decoding the ISO Carbide Insert Code

C
Shape
N
Relief
M
Tolerance
G
Hole/Fix
12
Size
04
Thickness
08
Radius

Multi-Brand Compatibility

Access top-tier brands like Sandvik Coromant, Iscar, and Kennametal alongside cost-effective high-performance brands like OYYU and BEYOND.

Advanced Coating Tech

Featuring the latest CVD TiCN-Al2O3 for high-speed steel turning and PVD TiAlN for heat-resistant superalloys and stainless steel.

Precision Geometries

Engineered chipbreakers (-PM, -MA, -GU) provide superior control across finishing, medium, and roughing operations.

Technical Specifications: Metric vs. Imperial

ISO Metric ANSI Imperial I.C. Dimension Thickness
CNMG 120408 CNMG 432 12.7 mm (1/2") 4.76 mm (3/16")
TNMG 160404 TNMG 331 9.525 mm (3/8") 4.76 mm (3/16")
WNMG 080408 WNMG 432 12.7 mm (1/2") 4.76 mm (3/16")

Recommended Cutting Parameters

Steel (P15-P30) Vc: 180-350 m/min | f: 0.15-0.45 mm/rev
Stainless (M10-M25) Vc: 100-220 m/min | f: 0.10-0.35 mm/rev

Precision Tool Holders

Compatible with MCLNR / DWLNR / PCLNR / MTJNR Series

Shop High-Rigidity Turning Tool Holders

Industrial Applications

  • Automotive engine parts and gear machining.
  • Aerospace turbine components and landing gear.
  • Heavy-duty oil and gas pipe threading.
  • Precision medical instrument manufacturing.

Equipment Compatibility

Optimized for use on leading CNC machines including Mazak, Haas, Okuma, DMG Mori, and Doosan. Fits all standard ISO/ANSI tool blocks.

Global Brand Grade Quick-Map

Brand Steel (P) Stainless (M) Cast Iron (K)
Sandvik GC4325 GC2025 GC3210
Iscar IC8250 IC907 IC5010
BEYOND BY9030 BY2125 BY1010

The Beyond CNC Advantage

Authenticity Guaranteed
100% Genuine Brands
Global Logistics
Fast Shipping Worldwide
Technical Support
Expert Tool Selection

Global Machinist Feedback

⭐⭐⭐⭐⭐ "Reliable Performance" - James W., USA
"Ordered the Sandvik GC4325 inserts. Authentic product and the tool life is exactly as expected. Fast shipping to the States."

⭐⭐⭐⭐⭐ "Great Alternative" - M. Berger, Germany
"Tried the OYYU inserts for my stainless job. Honestly, the quality is surprising for the price. Saved us 30% in tooling costs."

⭐⭐⭐⭐ "Expert Advice" - K. Tanaka, Japan
"The technical team helped me select the right Tungaloy grade for a specific alloy. Excellent service and deep product knowledge."

Technical FAQ

Q: Are these inserts original or replacements?

A: We supply 100% genuine original inserts from brands like Sandvik and Iscar. We also offer our own high-performance BEYOND brand for cost-conscious workshops.

Q: Can I use one insert for both Steel and Stainless?

A: While "General Purpose" grades exist, we recommend dedicated grades for Stainless (like IC907 or GC2025) to prevent work hardening and edge wear.

Q: Do you offer bulk discounts for factories?

A: Yes. For orders over 50 boxes, please contact our B2B sales department for specialized pricing and tailored logistics.

Material Selection Pro-Tip

Always check the "Workpiece Color Code" on the insert box: **Yellow (P)** for Steel, **Blue (M)** for Stainless, and **Red (K)** for Cast Iron. Matching the coating to the material is the fastest way to double your tool life. **BEYOND CNC** - Your Industrial Tool Partner.

© Technical Document by Beyond Li - CNC Tooling Technical Director