TaeguTec SNG45210R TT5100 | Heavy Duty Square Turning Insert
Taegutec SNG Square Negative Inserts
High-Stability 8-Edge Solutions for Extreme Machining Conditions
Product Overview
"Which square insert is best for high-speed machining of hardened steel or HRSA materials where standard carbide edges fail due to extreme heat?"
The Taegutec SNG series is a heavy-duty square negative insert designed for maximum material removal and thermal stability. Available in specialized Ceramic grades (AB series) and GoldRush Carbide grades, the SNG geometry features a 0° clearance angle and a robust cross-section. This makes it the premier choice for heavy roughing and high-speed finishing of cast iron and hardened materials. With 8 usable cutting edges, it offers unparalleled economic efficiency for large-scale industrial turning.
Key Performance Advantages
- Maximum Economy: Double-sided design provides 8 cutting edges per insert.
- Ceramic Capability: SNG Ceramic grades allow for cutting speeds up to 5x faster than conventional carbide in hardened steel.
- Robust Geometry: The 90° square shape offers superior edge strength against mechanical shock in interrupted cuts.
- Precision Ground Class: Ground periphery ensures high repeatability and secure seating in heavy-duty holders.
Technical Specifications & Cutting Parameters
| Insert Model | Metric (ISO) | Imperial (ANSI) | Feed rate (mm/rev) |
|---|---|---|---|
| SNGN 12 | 120408 | SNG 432 | 0.15 - 0.40 |
| SNGN 15 | 150712 | SNG 553 | 0.20 - 0.60 |
| SNGN 19 | 190616 | SNG 644 | 0.25 - 0.80 |
Shop Heavy-Duty Turning Holders →
Primary Applications
- Heavy roughing of forged steel and large axles.
- High-speed turning of chilled cast iron (Ceramic grades).
- Machining of Hardened Steel (>HRC 45) with SiAlON Ceramic.
- Roll turning in steel mills and paper industries.
Compatibility
The SNG ISO standard ensures these inserts fit any 0° negative rake square-style tool holder. Optimized for heavy-duty CNC lathes (Mori Seiki, Doosan, Hankook) and vertical boring mills.
Taegutec SNG Grade Selection
| Grade | Material | Primary Workpiece |
|---|---|---|
| AB2010 | SiAlON Ceramic | HRSA / Inconel / Hardened Steel |
| TT8125 | CVD Carbide | General Steel / Roughing |
| TT9030 | PVD Carbide | Stainless Steel / Interrupted Cuts |
Verified CNC Machinist Feedback
"The SNG ceramic AB2010 is incredible for Inconel. We increased our cutting speed by 300% over carbide."
— Robert T., USA"8 taglienti per inserto. Un risparmio enorme per la nostra produzione di alberi motori."
— Giuseppe L., Italy"Sehr stabil bei unterbrochenem Schnitt. Taegutec Qualität ist unschlagbar."
— Markus W., Germany"鍛造鋼の荒加工に最適。チップの寿命が非常に長いです。"
— Kenichi O., JapanFrequently Asked Questions
Q: When should I use SNG (Negative) instead of SPG (Positive) inserts?
A: SNG inserts are much stronger and have double the cutting edges. Use them for heavy roughing where the machine and setup are rigid. SPG is for finishing or small diameter parts.
Q: Do I need special holders for Ceramic SNG inserts?
A: Yes, ceramic machining generates extreme heat and pressure. We recommend high-rigidity tool holders with specialized top-clamping to prevent insert movement.