Mitsubishi CCMT060202-FV VP15TF Finishing Carbide Insert (10pcs)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
CCMT060202-FV VP15TF
Ultra-Fine Finishing Master | Miracle PVD Coating | FV Precision Geometry
Material Grade & FV Precision
VP15TF Grade (Miracle PVD): The industry's most versatile PVD coating. The proprietary Miracle Coating (TiAlN-based) is applied to a micro-grain carbide substrate, offering an elite balance of toughness and wear resistance. It is specifically designed to prevent Built-Up Edge (BUE) when machining gummy materials like 304/316 Stainless Steel.
FV Chipbreaker (Ultra-Fine Control): The FV designation is Mitsubishi’s sharpest finishing geometry. It is optimized for Very Light Finishing passes. Where standard inserts might rub or push the material, the FV geometry slices through, ensuring chips break cleanly even at microscopic depths of cut.
0.2mm Precision Radius: The 02 (0.0079") radius is critical for Micro-Boring and small-diameter turning. It minimizes radial cutting forces, which is essential for preventing vibration and chatter in high-precision setups.
Metric vs. Imperial Comparison
| System | Model Designation | I.C. (Inscribed Circle) | Thickness | Radius (RE) |
|---|---|---|---|---|
| Metric | CCMT060202-FV | 6.35 mm | 2.38 mm | 0.20 mm |
| Imperial | CCMT21.50.5-FV | 1/4" | 3/32" | 0.0079" |
Recommended Cutting Parameters
*The FV geometry is designed for high-precision light loads. Ensure the feed rate does not exceed the chipbreaker's pocket width.
| Workpiece Material | Speed (Vc) | Feed (fn) | Depth (Ap) |
|---|---|---|---|
| Carbon/Alloy Steel | 120 - 250 m/min | 0.02 - 0.10 mm/r | 0.05 - 0.80 mm |
| Stainless Steel | 80 - 180 m/min | 0.02 - 0.08 mm/r | 0.05 - 0.60 mm |
Compatible Tool Holders
Maximum precision for SCLCR/L 06 series Boring Bars and Swiss-type Turning Tools:
Shop SCLCR 06 HoldersPro-Tip: FV vs. FM Chipbreaker
FV (Ultra-Finishing): Use this when your depth of cut is extremely shallow (less than 0.5mm) and you need maximum chip control on small parts.
FM (Finishing): Switch to FM if you have a slightly larger depth of cut or need a more versatile finisher for general job-shop applications.
Search Keywords: CCMT060202-FV VP15TF price, Mitsubishi ultra-finishing inserts, CCMT21.50.5-FV carbide, VP15TF speed and feed data, precision micro-boring inserts.
Long-tail Keywords: Best carbide inserts for stainless steel finishing on small lathes, Mitsubishi FV chipbreaker for SCLCR 06 boring bars, achieving mirror finish with 0.2mm radius, CCMT 06 series VP15TF grade finishing, buy Mitsubishi CCMT060202-FV online for CNC precision.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.