Mitsubishi DNMG110408-MA UE6110 Steel Turning Insert | 10pcs/Box
Price shown is a starting point. Contact us for a precise quote based on your requirements.
DNMG110408-MA UE6110
High-Speed Steel Production | UE6110 Heat Resistance | MA Balanced Geometry
Engineered for High-Speed Steel Removal
UE6110 Grade (High-Temp CVD Coating): The UE6110 is Mitsubishi’s premier CVD-coated grade for high-speed continuous turning. It features a specialized thick-film Al2O3 layer that provides exceptional thermal protection. This allows the insert to operate at significantly higher cutting speeds (Vc) than general-purpose grades without suffering from plastic deformation or crater wear in Carbon and Alloy Steels.
MA Chipbreaker (Medium Cut Precision): The MA geometry is the industry standard for medium turning. It is designed with a balanced rake angle that provides low cutting resistance while ensuring excellent chip curling. This prevents the "long stringer" chips often seen in soft steels, ensuring a safer work environment and protecting the workpiece surface.
0.8mm Radius (High Feed Strength): The "08" (1/32") nose radius provides a robust edge that can handle aggressive feed rates. It is more resistant to chipping than the 0.4mm version and is ideal for parts requiring a balance between high metal removal rates and good surface finish.
Metric vs. Imperial Comparison
| System | Model Designation | I.C. (Inscribed Circle) | Thickness | Radius (RE) |
|---|---|---|---|---|
| Metric | DNMG110408-MA | 9.525 mm | 4.76 mm | 0.80 mm |
| Imperial | DNMG332-MA | 3/8" | 3/16" | 0.0315" (1/32") |
Recommended Cutting Parameters
*UE6110 thrives on speed. For best results, avoid low cutting speeds which can lead to built-up edge (BUE).
| Workpiece Material | Speed (Vc) | Feed (fn) | Depth (Ap) |
|---|---|---|---|
| Carbon Steel (S45C/1045) | 250 - 450 m/min | 0.15 - 0.35 mm/r | 1.00 - 3.00 mm |
| Alloy Steel (4140/SCM440) | 200 - 350 m/min | 0.15 - 0.30 mm/r | 1.00 - 2.50 mm |
Compatible Tool Holders
Maximum productivity for 11-series 55° diamond pockets:
Shop DDJNR 11 HoldersPro-Tip: UE6110 vs. UE6020
UE6110 (The Speed King): Choose this for mass production where the setup is stable and the cut is continuous. Its harder coating provides massive tool life at high RPMs.
UE6020 (The Tough Generalist): If you are doing interrupted cuts (like turning a hex or a shaft with a keyway), switch to UE6020. UE6110 is optimized for pure speed, while UE6020 is optimized for impact.
Search Keywords: DNMG110408-MA UE6110 price, Mitsubishi high speed turning inserts, DNMG332-MA carbide, UE6110 cutting data, CNC steel machining tools.
Long-tail Keywords: Best carbide inserts for high speed carbon steel turning, Mitsubishi UE6110 grade for alloy steel production, DNMG 110408-MA medium turning insert for CNC, CVD coated high-velocity inserts for steel, buy genuine Mitsubishi DNMG 11 series online.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.