Korloy VCMT160408-HMP NC3020 (ANSI VCMT 332-HMP) CVD Carbide Insert for Steel (10pcs)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
The Original Korloy VCMT160408-HMP NC3020 (ANSI Cross Reference: VCMT 332-HMP) is a high-performance 35° Rhombic Positive Insert engineered for Productive Steel Turning. With its reinforced 0.8mm (1/32") Corner Radius and robust 1604 substrate (4.76mm thickness), this insert is designed to handle higher material removal rates while maintaining exceptional edge integrity. The NC3020 CVD Grade provides the wear resistance needed for continuous high-speed operation in carbon and alloy steels.
Built for Strength: The R0.8 corner radius offers significantly higher edge security than the R0.4 version. It is the preferred choice for rough-to-medium profiling where the cutting depth varies or where the material has a slightly harder surface skin.
Technical Specifications (Metric & ANSI):
| ISO Designation | VCMT 160408-HMP |
| ANSI Designation | VCMT 332-HMP |
| Inscribed Circle (IC) | 9.525 mm / (3/8") |
| Thickness (S) | 4.76 mm / (3/16") |
| Corner Radius (r) | 0.8 mm / (1/32") |
| Grade | NC3020 (CVD Coated) |
| Primary Material | Steel (P10 - P30) |
Core Performance Benefits:
- Premium CVD Grade (NC3020): Features a specialized TiCN+Al2O3 multi-layer coating that acts as a thermal barrier, preventing plastic deformation and flank wear.
- HMP Chipbreaker Versatility: The "Harmony Medium-Positive" geometry is optimized for medium-duty cutting, providing reliable chip breaking and reducing tool pressure.
- Reinforced Edge: The 0.8mm radius allows for increased feed rates (up to 0.25 mm/rev), drastically reducing cycle times while maintaining a strong cutting tip.
- Enhanced Stability: The thick 4.76mm base provides excellent resistance to vibration, especially critical in long-reach boring operations.
Recommended Cutting Parameters:
| Workpiece Material | Cutting Speed (Vc) | Feed Rate (fn) | Depth of Cut (ap) |
|---|---|---|---|
| Carbon / Alloy Steel | 160 - 360 m/min | 0.12 - 0.28 mm/rev | 0.8 - 3.0 mm |
| Hardened Steel (<35HRC) | 120 - 240 m/min | 0.10 - 0.22 mm/rev | 0.5 - 2.0 mm |
Compatible Tooling Systems:
Fits all standard tool holders designed for V-bottom 35° inserts with a 7° relief angle:
- External Profile Tooling: SVJCR 2020K16 / SVJCR 2525M16
- Internal Boring Bars: S32T-SVUCR16 / S40U-SVQCR16
Machinist Tip: Maximizing Tool Life
Why choose the R0.8 (VCMT 332) for steel?
The 0.8mm corner radius allows you to "push" the tool harder. If you are experiencing premature tip wear with an R0.4, switching to the R0.8 provides more carbide mass to dissipate heat, extending the life of each edge.
While R0.8 is tougher, it generates higher radial cutting forces. Ensure your workpiece setup is rigid. For long, slender shafts, monitor for vibration and adjust speed accordingly.
Packaging: 10 pieces per box.
VCMT 332-HMP Korloy NC3020, VCMT160408 for medium steel turning, NC3020 CVD grade performance, VCMT vs VBMT inserts, VCMT inserts for SVUCR16 boring bars
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.