Products

CVD Coating:YBD152,Designation:DNMG150408-PM YBD152 DNMG432-PM YBD152 Dimension (mm):L:15.5,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Cast iron:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YB7315 ,Designation:DNMG150408-TC YB7315  DNMG432-TC YB7315 Dimension (mm):L:15.5,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Cast iron:Normal Machining Condition Turning Cemented carbide and cermet Inserts

Internal insert  Coated ：T9115   Designation: DNMG150408-TM T9115 Rhombic:55° ,With hole   , Corner radius:0.8 Steel:(Continuous cutting,Light interrupted cutting) Cast iron:(Continuous cutting,Light interrupted cutting) Garde：T9115 P10 - P20 K15 - K30...

Internal insert  Coated ：T9125   Designation: DNMG150408-TM T9125 Rhombic:55° ,With hole  , Corner radius:0.8 Steel:(Light interrupted cutting,Heavy interrupted cutting) Garde：T9125 P20 - P30 Coating：Main composition (TiCN-Al2O3)N Thickness 16/ μm,Feature：High chipping resistance in...

Coated:NC3120,Designation:DNMG150408-VF NC3120 Turning Insert (Negative)  Dimensions (mm):d:12.7,t:4.76~6.35,d1:5.16 Rhombic 55° Negative Cutting Condition:fn (mm/rev):0.10~0.40,ap (mm):0.50~1.50 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with chipping...

CVD Coating:YB6315 ,Designation:DNMG150408-ZM YB6315 DNMG432-ZM YB6315 Dimension (mm):L:15.5,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coated Carbide:CA5525,  Designation: DNMG150408CQ CA5525 Corner Radius (in) RE:1/32,Good chip control at various D.O.C. such as copying. Applicable for upfacing.Color:Gold , Coating / Main Component:TiCN+Al2O3+TiN,Advantages:Application: For general machining of steel, roughing...

PVD coated:TT9080 Designation:DNMG150408EM TT9080 ap(mm):0.5-5.0,Feed(mm/rev):0.13-0.50 Dimension (mm):IC:12.7,S:4.76-6.35,RE:0.4-1.2 Negative 55° rhombic inserts

Cermet:CT3000 Designation:DNMG150408FG CT3000 ap(mm):0.7-2.0,Feed(mm/rev):0.10-0.25 Dimension (mm):IC:12.7,S:4.76-6.35,RE:0.4-1.2 Negative 55° rhombic inserts Marked: Type B chip breaker

CVD coated:TT8115 Designation:DNMG150408FG TT8115 ap(mm):0.7-2.0,Feed(mm/rev):0.10-0.25 Dimension (mm):IC:12.7,S:4.76-6.35,RE:0.4-1.2 Negative 55° rhombic inserts Marked: Type B chip breaker

CVD Coated Carbide:CA5515,  Designation:DNMG150408GS CA5515 Corner Radius (in) RE:1/32 ,Strong edge chipbreaker. Stable for continuous machining and light interrupted machining,Color:Gold , Coating / Main Component:TiCN+Al2O3+TiN,Advantages:Application: Machining of steel, continuous to light interruption

CVD Coated Carbide:CA5525,  Designation: DNMG150408GS CA5525 Corner Radius (in) RE:1/32,Strong edge chipbreaker. Stable for continuous machining and light interrupted machining.Color:Gold , Coating / Main Component:TiCN+Al2O3+TiN,Advantages:Application: For general machining of steel, roughing to...

CVD Coated Carbide:CA5525,  Designation: DNMG150408HQ CA5525 Corner Radius (in) RE:1/32,Sharp cutting performance with 3-D rake angle and double projection design.Color:Gold , Coating / Main Component:TiCN+Al2O3+TiN,Advantages:Application: For general machining of steel, roughing to...

Cermet:TN60 ,  Designation: DNMG150408HQ TN60 Corner Radius(in) RE:1/32 ,Sharp cutting performance with 3-D rake angle and double projection design,Color: Gray , Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption...

CVD coated:TT8115 Designation:DNMG150408MC TT8115 ap(mm):0.7-3.5,Feed(mm/rev):0.12-0.35 Dimension (mm):IC:12.7,S:4.76-6.35,RE:0.4-1.2 Negative 55° rhombic inserts

CVD coated:TT5100 Designation:DNMG150408MT TT5100 ap(mm):1.0-4.0,Feed(mm/rev):0.17-0.50 Dimension (mm):IC:12.7,S:4.76-6.35,RE:0.4-1.6 Negative 55° rhombic inserts

CVD coated:TT8115 Designation:DNMG150408MT TT8115 ap(mm):1.0-4.0,Feed(mm/rev):0.17-0.50 Dimension (mm):IC:12.7,S:4.76-6.35,RE:0.4-1.6 Negative 55° rhombic inserts

Coated Carbide:AC520U,Designation:DNMG150408N-GU AC520U Nose Radius RE:.0313. Dimension (inch):Cutting Edge Length L:6102,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Exotic Alloy:General Cutting 2nd Recommended Turning 55˚ Diamond Positive Inserts.With Hole Application Range

Coated Carbide:AC700G,Designation:DNMG150408N-GU AC700G Nose Radius RE:.0313. Dimension (inch):Cutting Edge Length L:6102,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Steel:Continuous Cutting 2nd Recommended,Cast Iron:nterrupted Cutting 2nd Recommended Turning 55˚ Diamond Positive Inserts.With Hole Application Range...

Coated Carbide:AC820P ,Designation:DNMG150408N-GU AC820P  Nose Radius RE:.0313. Dimension (inch):Cutting Edge Length L:6102,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Steel:General Cutting 2nd Recommended,Cast Iron:nterrupted Cutting 2nd Recommended Turning 55˚ Diamond Positive Inserts.With Hole Application Range...

Coated Carbide:AC510U ,Designation:DNMG150408N-MU AC510U  Nose Radius RE:.0313. Dimension (inch):Cutting Edge Length L:6102,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Exotic Alloy:Continuous Cutting 2nd Recommended Application Range

Coated Carbide:AC520U,Designation:DNMG150408N-MU AC520U Nose Radius RE:.0313. Dimension (inch):Cutting Edge Length L:6102,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Exotic Alloy:General Cutting 2nd Recommended Application Range

Coated Carbide:AC820P ,Designation:DNMG150408N-SU AC820P Nose Radius RE:.0313. Dimension (inch):Cutting Edge Length L:6102,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Steel:General Cutting 2nd Recommended,Cast Iron:nterrupted Cutting 2nd Recommended Application Range

Coated Carbide:AC810P,Designation:DNMG150408N-UX AC810P Nose Radius RE:.0313. Dimension (inch):Cutting Edge Length L:6102,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Steel:Continuous Cutting 2nd Recommended Application Range

Coated Carbide:AC830P,Designation:DNMG150408N-UX AC830P Nose Radius RE:.0313. Dimension (inch):Cutting Edge Length L:6102,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Steel:Interrupted Cutting 2nd Recommended Application Range

CVD coated:TT8125 Designation:DNMG150408PC TT8125 ap(mm):0.5-4.0,Feed(mm/rev):0.15-0.50 Dimension (mm):IC:12.7,S:4.76-6.35,RE:0.4-1.6 Negative 55° rhombic inserts

 Cermet：NS9530  Designation: DNMG150408R-S NS9530 Rhombic:55° ,With hole  , Corner radius:0.8 Steel:(Continuous cutting,Light interrupted cutting) Cast iron:(Continuous cutting,Light interrupted cutting) Garde：NS9530  Coating：Main composition (Uncoated)Feature：High fracture resistance,- Suitable for finishing to medium...

Coated:US735  Designation:DNMG150412-MS US735 RE:1.2, Rhombic,55° Stainless Steel:Unstable Cutting First recommendation for medium cutting of  difficult-to-cut materials A wide chip pocket controls increasing of the cutting resistance and reduces vibration and...

CVD Coating:YBC251,Designation:DNMG150412-PM YBC251 DNMG433-PM YBC251 Dimension (mm):L:15.5,I.C:12.7,S:4.76,d:5.16,r:1.2 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC252,Designation:DNMG150412-PM YBC252 DNMG433-PM YBC252 Dimension (mm):L:15.5,I.C:12.7,S:4.76,d:5.16,r:1.2 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YB7315 ,Designation:DNMG150412-TC YB7315  DNMG433-TC YB7315 Dimension (mm):L:15.5,I.C:12.7,S:4.76,d:5.16,r:1.2 Workpiece Material:Cast iron:Normal Machining Condition Turning Cemented carbide and cermet Inserts  

Internal insert  Coated ：T9115   Designation: DNMG150412-TM T9115 Rhombic:55° ,With hole   , Corner radius:1.2 Steel:(Continuous cutting,Light interrupted cutting) Cast iron:(Continuous cutting,Light interrupted cutting) Garde：T9115 P10 - P20 K15 - K30...

Internal insert  Coated ：T9125   Designation: DNMG150412-TM T9125 Rhombic:55° ,With hole  , Corner radius:1.2 Steel:(Light interrupted cutting,Heavy interrupted cutting) Garde：T9125 P20 - P30 Coating：Main composition (TiCN-Al2O3)N Thickness 16/ μm,Feature：High chipping resistance in...

CVD Coated Carbide:CA5525,  Designation: DNMG150412CQ CA5525 Corner Radius (in) RE:3/64,Good chip control at various D.O.C. such as copying. Applicable for upfacing.Color:Gold , Coating / Main Component:TiCN+Al2O3+TiN,Advantages:Application: For general machining of steel, roughing...

CVD Coated Carbide:CA5525,  Designation: DNMG150412HQ CA5525 Corner Radius (in) RE:3/64,Sharp cutting performance with 3-D rake angle and double projection design.Color:Gold , Coating / Main Component:TiCN+Al2O3+TiN,Advantages:Application: For general machining of steel, roughing to...

Coated:UC5115 Designation:DNMG150604 UC5115 RE:0.4, Rhombic,55° Cast Iron:General Cutting  

CVD Coating:YBC251,Designation:DNMG150604-15 YBC251 DNMG441-15 YBC251 Dimension (mm):L:15.5,I.C:12.7,S:6.35,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts DM:Main chip breaker for medium machining with continuous or interrupted cut of steel...

CVD Coating:YB6315,Designation:DNMG150604-ADF YB6315 DNMG441-ADF YB6315 Dimension (mm):L:15.5,I.C:12.7,S:6.35,d:5.16,r:0.4 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts  

CVD Coating:YBC252,Designation:DNMG150604-DF YBC252 DNMG441-DF YBC252 Dimension (mm):L:15.5,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC151,Designation:DNMG150604-DM YBC151 DNMG441-DM YBC152 Dimension (mm):L:15.5,I.C:12.7,S:6.35,d:5.16,r:0.4 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts DM:Main chip breaker for medium machining with continuous or interrupted cut of steel...

CVD Coating:YBC251 ,Designation:DNMG150604-DM YBC251 DNMG441-DM YBC251 Dimension (mm):L:15.5,I.C:12.7,S:6.35,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

PVD Coating:YBG205,Designation:DNMG150604-EF YBG205 DNMG441-EF YBG205 Dimension (mm):L:15.5,I.C:12.7,S:6.35,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition, Turning Cemented carbide and cermet Inserts

PVD Coating:YBG205,Designation:DNMG150604-EM YBG205 DNMG441-EM YBG205 Dimension (mm):L:15.5,I.C:12.7,S:6.35,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition, Turning Cemented carbide and cermet Inserts

Coated :UC5015  Designation: DNMG150604-GK MC5015 RE:0.4,Rhombic,55° Cast Iron:General Cutting Alternative chip breaker for medium cutting for cast iron.Breakers are suitable for a wide range of applications.Maintenance of high stability by...

Coated:PC9030,Designation:DNMG150604-HA PC9030 Turning Insert (Negative)  Dimensions (mm):d:12.7,t:4.76~6.35,d1:5.16 Rhombic 55° Negative Cutting Condition:fn (mm/rev):0.05~0.30,ap (mm):0.80~3.50 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...

Coated:NC3020,Designation:DNMG150604-HM NC3020 Turning Insert (Negative)  Dimensions (mm):d:12.7,t:4.76~6.35,d1:5.16 Rhombic 55° Negative Cutting Condition:fn (mm/rev):0.05~0.30,ap (mm):0.90~5.00

Coated:NC3120,Designation:DNMG150604-HM NC3120 Turning Insert (Negative)  Dimensions (mm):d:12.7,t:4.76~6.35,d1:5.16 Rhombic 55° Negative Cutting Condition:fn (mm/rev):0.05~0.30,ap (mm):0.90~5.00 Workpiece:Steel:General cutting NC3120 Features: Medium to roughing for steel. Combining excellent fracture resistance substrate with chipping...

Coated:PC9030,Designation:DNMG150604-HM PC9030 Turning Insert (Negative)  Dimensions (mm):d:12.7,t:4.76~6.35,d1:5.16 Rhombic 55° Negative Cutting Condition:fn (mm/rev):0.05~0.30,ap (mm):0.90~5.00 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...