Mitsubishi APMT1135PDER-H2 HTI10 Carbide Milling Insert (10pcs)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
APMT1135PDER-H2 HTI10
Reinforced H2 Rougher | Uncoated HTI10 Carbide | Non-Ferrous Specialist
The Mitsubishi APMT1135PDER-H2 HTI10 is engineered for the APX3000 milling system, specifically targeting high-material removal rates in Aluminum, Copper Alloys, and Cast Iron. The H2 chipbreaker features a reinforced land that protects the edge during heavy interruptions and roughing passes. Utilizing HTI10 uncoated micro-grain carbide, this insert offers the sharpest shearing action possible, significantly reducing cutting forces and heat generation.
Dimensional Comparison (Metric & Imperial)
| Specification | Metric (mm) | Imperial (Inch) |
|---|---|---|
| Inscribed Circle (IC) | 11.00 mm | 0.4331" |
| Thickness (S1) | 3.50 mm | 0.1378" |
| Corner Radius (RE) | 0.80 mm | 0.0315" |
Recommended Cutting Parameters
*HTI10 is an uncoated grade; ensure proper coolant usage to maximize tool life in Aluminum.
| Workpiece Material | Speed (Vc) | Feed (fz) |
|---|---|---|
| Aluminum Alloys (Si < 12%) | 300 - 800 m/min | 0.12 - 0.25 mm/t |
| Cast Iron (Gray) | 80 - 150 m/min | 0.10 - 0.20 mm/t |
| Copper / Brass / Plastics | 150 - 450 m/min | 0.10 - 0.18 mm/t |
Required Tool Holder
Maximum performance when used with Mitsubishi APX3000 milling cutters:
Shop APX3000 HoldersPro-Tip: HTI10 Selection Guide
HTI10 (Uncoated): This grade is your primary choice for Aluminum. Because it is uncoated, the cutting edge remains much sharper than PVD-coated inserts, preventing "Built-up Edge" (BUE).
TF15 (DLC Coated): If you are machining High-Silicon Aluminum (>12% Si) or experiencing high abrasive wear, consider switching to TF15, which provides a diamond-like coating for extended life against silica.
Search Keywords: APMT1135PDER-H2 HTI10 price, Mitsubishi APX3000 aluminum roughing, APMT1135 dimensions metric inch, HTI10 speed and feed data, H2 chipbreaker for non-ferrous milling.
Long-tail Keywords: Best inserts for roughing aluminum 6061, Mitsubishi APMT1135 shoulder milling for cast iron, CNC uncoated carbide inserts for copper, APX3000 HTI10 replacement inserts 10pcs pack, buy Mitsubishi indexable tooling for non-ferrous alloys.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.