Mitsubishi MMT16ERG60-S VP15TF Threading Insert | MMC Japan
Price shown is a starting point. Contact us for a precise quote based on your requirements.
MMT16ERG60-S VP15TF
Mitsubishi Materials | External Partial Profile 60° G-Range (Metric / UN)
The Mitsubishi MMT16ERG60-S VP15TF is a heavy-duty external threading insert featuring a partial profile 60-degree G geometry. The "G" designation is optimized for coarser pitches, covering a range from 1.75mm to 3.0mm (14 to 8 TPI). This insert is the professional solution for CNC threading of large Metric bolts and Unified National (UN) coarse threads. Featuring the specialized -S type 3D molded chipbreaker and the proprietary VP15TF Miracle PVD coating, it excels in threading stainless steel and high-tensile alloys where high heat and heavy chip loads are constant factors.
Technical Specifications
| ISO/Metric Designation | MMT16ERG60-S |
|---|---|
| Thread Profile | 60° Partial Profile (G-Range Coarse) |
| Pitch Range (Metric) | 1.75 - 3.0 mm |
| Pitch Range (Inch) | 14 - 8 TPI |
| Grade / Coating | VP15TF (Miracle Al-Ti-N PVD) |
VP15TF Miracle Grade
The VP15TF grade is Mitsubishi's benchmark for indexable threading durability. It utilizes a high-toughness micro-grain substrate coated with Miracle (Al-Ti-N) PVD. This provides incredible resistance to built-up edge (BUE) and plastic deformation, ensuring consistent performance when threading gummy materials like 304 and 316 stainless steel.
-S Type 3D Chipbreaker
Large pitch threads (8-14 TPI) produce substantial chip volume that can destroy thread surface finish. The -S molded chipbreaker uses a specialized 3D rake geometry to curl chips away from the cutting zone. This minimizes heat transfer back into the insert, extending tool life during aggressive CNC operations.
Recommended Cutting Parameters
| Workpiece Material | Cutting Speed ($v_c$) | Recommended Passes |
|---|---|---|
| Carbon Steel (S45C) | 100 - 180 m/min | 12 - 20 |
| Stainless Steel (304/316) | 80 - 140 m/min | 14 - 24 |
| Alloy Steel (SCM440) | 90 - 160 m/min | 13 - 22 |
MMTE EXTERNAL TOOLING SYSTEM
This 16ER G60 insert is designed to fit Mitsubishi MMTE external holders and all standard 16mm (3/8" IC) threading tool shanks.
Shop MMTE Holders →Metric vs. Inch Cross-Reference
| Feature | Metric Designation | Inch Designation (ANSI) |
|---|---|---|
| Insert Size | 16 ER | 16ER (3/8" Inscribed Circle) |
| Pitch Range | 1.75 - 3.0 mm | 14 - 8 TPI |
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.