Products

PVD Coating:YBG205,Designation:WNHU060408PNR-GM YBG205 Turning Shallow hole drilling inserts Dimension (mm):L:5.7,ØIC:9.525,S:4.0,ød:3.5,bs:1.35,r:0.8 Workpiece Material:Steel:Ideal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition

CVD Coating:YBM253,Designation:WNHU060408PNR-GM YBM253 Turning Shallow hole drilling inserts Dimension (mm):L:5.7,ØIC:9.525,S:4.0,ød:3.5,bs:1.35,r:0.8 Workpiece  Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition

CVD Coating:YBD152,Designation:WNHU080608PNR-GM YBD152 Turning Shallow hole drilling inserts Dimension (mm):L:7.7,ØIC:12.7,S:5.4,ød:4.4,bs:1.6,r:0.8 Workpiece Material:Cast iron:Normal Machining Condition

PVD Coating:YBG205,Designation:WNHU080608PNR-GM YBG205 Turning Shallow hole drilling inserts Dimension (mm):L:7.7,ØIC:12.7,S:5.4,ød:4.4,bs:1.6,r:0.8 Workpiece Material:Steel:Ideal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition

CVD Coating:YBD152 ,Designation:WNMA080404 YBD152  WNMA431 YBD152 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Cast iron:Normal Machining Condition Turning Cemented carbide and cermet Inserts

Coated Carbide:AC4010K,Designation:WNMA080408 AC4010K WNMA432 AC4010K Nose Radius RE:.0313. Dimension (inch):Cutting Edge Length L:3425,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Cast Iron:Continuous Cutting 1st Recommended Turning Trigon Negative Inserts

Coated:MC5015 Designation:WNMA080408 MC5015 RE:0.8, Rhombic,80° Cast Iron:General Cutting

Coated :UC5115  Designation: WNMA080408 UC5115 RE:0.8, Rhombic,80° Cast Iron:General Cutting

CVD Coating:YBD102,Designation:WNMA080408 YBD102 WNMA432 YBD102 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Cast iron:Ideal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBD152 ,Designation:WNMA080408 YBD152  WNMA432 YBD152 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Turning Cemented carbide and cermet Inserts Workpiece Material:Cast iron:Normal Machining Condition

Coated :UC5115  Designation: WNMA080412 UC5115 RE:1.2, Rhombic,35° Cast Iron:General Cutting

CVD Coating:YBD152C,Designation:WNMA080412 YBD152C WNMA433 YBD152C Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:1.2 Workpiece Material:Cast iron:Normal Machining Condition Turning Cemented carbide and cermet Inserts  

10pcs/box Carbide Inserts LT10 For General Processing LT1000 For Cast Iron CNC Lathe Tunring Inserts WNMG WNMG080404NN WNMG080408NN WNMG080412NN LT

CVD Coating:YBC152,Designation:WNMG060404-DF YBC152 WNMG331-DF YBC152 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.4 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC252,Designation:WNMG060404-DF YBC252 WNMG331-DF YBC252 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.4 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBM251,Designation:WNMG060404-DF YBM251 WNMG331-DF YBM251 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.4 Turning Cemented carbide and cermet Inserts Workpiece Material:Stainless Steel:Normal Machining Condition DF:Chip breaker for finishing and semi-finishing of steel and stainless steel.

PVD Coating:YBG202,Designation:WNMG060404-EM YBG202 WNMG331-EM YBG202 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.4 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

PVD Coating:YBG205,Designation:WNMG060404-EM YBG205 WNMG331-EM YBG205 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.4 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBM253,Designation:WNMG060404-EM YBM253 WNMG331-EM YBM253 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.18,r:0.4 Workpiece Material:Stainless Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

Coated:NC3020,Designation:WNMG060404-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.15~0.43,ap (mm):0.42~3.00

Coated:PC9030,Designation:WNMG060404-HS PC9030 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Coated:US735  Designation:WNMG060404-MA US735 RE:0.4, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Coated:US735  Designation:WNMG060404-MS US735 RE:0.4, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the cutting resistance and reduces vibration and chip...

CVD Coating:YBC251,Designation:WNMG060404-PMF YBC251 WNMG332-DM YBC251 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.4 Turning Cemented carbide and cermet Inserts Workpiece Material:Steel:Normal Machining Condition

Internal insert  Coated ：T9125   Designation: WNMG060404-TM T9125 Trigon:80° ,With hole  , Corner radius:0.4  ,Medium cutting (Basic selection) Steel:(Light interrupted cutting,Heavy interrupted cutting) Garde：T9125 P20 - P30 Coating：Main composition (TiCN-Al2O3)N Thickness 16/...

Cermet:CT3000 Designation:WNMG060404FG CT3000 ap(mm):0.5-2.0,Feed(mm/rev):0.07-0.20 Dimension (mm):IC:9.52,S:4.76,RE:0.4-1.2 Negative 80° trigon inserts

CVD coated:TT8115 Designation:WNMG060404FG TT8115 ap(mm):0.5-2.0,Feed(mm/rev):0.07-0.20 Dimension (mm):IC:9.52,S:4.76,RE:0.4-1.2 Negative 80° trigon inserts

CVD Coated Carbide:CA5525,Designation:WNMG060404HQ CA5525 ANSI:WNMG331HQ Corner Radius (in):1/64,Color:Gold Carbon/Alloy Steel:Light Interruption / 2nd Choice Coating / Main Component:TiCN+Al2O3+TiN, Advantages:Application: For general machining of steel, roughing to interruption HQ:Sharp cutting performance with...

Cermet:TN60,Designation:WNMG060404HQ TN60 ANSI:WNMG331HQ TN60 Corner Radius(in) RE:1/64,Color: Gray, Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption HQ:Sharp cutting performance with 3-D rake angle and double projection design. TURNING...

CVD Coating:YBC251,Designation:WNMG060408-DF YBC251 WNMA332-DF YBC251 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC251,Designation:WNMG060408-DF YBC251 WNMG332-DF YBC251 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC252,Designation:WNMG060408-DF YBC252 WNMG332-DF YBC252 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC152,Designation:WNMG060408-DM YBC152 WNMG332-DM YBC152 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC251,Designation:WNMG060408-DM YBC251 WNMG332-DM YBC251 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC252,Designation:WNMG060408-DM YBC252 WNMG332-DM YBC252  Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Turning Cemented carbide and cermet Inserts Workpiece Material:Steel:Normal Machining Condition DM:Main chip breaker for medium machining with continuous or interrupted cut of steel...

CVD Coating:YBM251,Designation:WNMG060408-DM YBM251 WNMG332-DM YBM251 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Turning Cemented carbide and cermet Inserts Workpiece Material:Stainless Steel:Normal Machining Condition DM:Main chip breaker for medium machining with continuous or interrupted cut of...

PVD Coating:YBG205  ,Designation:WNMG060408-EF YBG205  WNMG332-EF YBG205 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition, Turning Cemented carbide and cermet Inserts

PVD Coating:YBG202,Designation:WNMG060408-EM YBG202 WNMG332-EM YBG202 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition, Turning Cemented carbide and cermet Inserts

PVD Coating:YBG205,Designation:WNMG060408-EM YBG205  WNMG332-EM YBG205 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition, Turning Cemented carbide and cermet Inserts

CVD Coating:YBM153,Designation:WNMG060408-EM YBM153 WNMG332-EM YBM153 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Stainless Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts EM:Sharp and stable cutting edge for semifinishing of sticky material and austenitic stainless...

CVD Coating:YBM253,Designation:WNMG060408-EM YBM253 WNMG332-EM YBM253 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Stainless Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

Coated:NC3020,Designation:WNMG060408-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~4.00

Coated:PC9030,Designation:WNMG060408-HS PC9030 Turning Insert (Negative) Dimensions (mm):d:9.525,t:4.76,d1:3.81 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Coated:US735  Designation:WNMG060408-MA US735 RE:0.8, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Coated:VP15TF Designation:WNMG060408-MA VP15TF RE:0.8, Rhombic,80° Steel:Unstable Cutting,Stainless Steel:Unstable Cutting,Cast Iron:Unstable Cutting,Heat-resistant Alloy, Titanium Alloy:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive...

Coated:UE6110  Designation:WNMG060408-MP UE6110 RE:0.8, Rhombic,35° Steel:General Cutting First recommendation for medium cutting of carbon steel and alloy steel Suitable for medium to light cutting.Breaker geometry appropriate for copying and back...

CVD Coating:YBC152,Designation:WNMG060408-PM YBC152 WNMG332-PM YBC152 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC251,Designation:WNMG060408-PM YBC251 WNMG332-PM YBC251 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts