Products

CVD Coating:YBC252,Designation:WNMG060408-PM YBC252 WNMG332-PM YBC252 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBD152,Designation:WNMG060408-PM YBD152 WNMG332-PM YBD152 Dimension (mm):L:6.5,I.C:9.525,S:4.76,d:3.81,r:0.8 Workpiece Material:Cast iron:Normal Machining Condition Turning Cemented carbide and cermet Inserts

Internal insert  Coated ：T9115   Designation: WNMG060408-TM T9115 Trigon:80° ,With hole , Corner radius:0.8, Medium cutting (Basic selection) Steel:(Continuous cutting,Light interrupted cutting) Cast iron:(Continuous cutting,Light interrupted cutting) Garde：T9115 P10 - P20 K15...

Internal insert  Coated ：T9125   Designation: WNMG060408-TM T9125 Trigon:80° ,With hole  , Corner radius:0.8  ,Medium cutting (Basic selection) Steel:(Light interrupted cutting,Heavy interrupted cutting) Garde：T9125 P20 - P30 Coating：Main composition (TiCN-Al2O3)N Thickness 16/...

Internal insert  Coated ：T9125   Designation: WNMG060408E-TM T9125 Trigon:80° ,With hole  , Corner radius:0.8  ,Medium cutting (Basic selection) Steel:(Light interrupted cutting,Heavy interrupted cutting) Garde：T9125 P20 - P30 Coating：Main composition (TiCN-Al2O3)N Thickness 16/...

PVD coated:TT9080 Designation:WNMG060408EM TT9080 ap(mm):0.8-3.0,Feed(mm/rev):0.13-0.50 Dimension (mm):IC:9.52,S:4.76,RE:0.4-1.2 Negative 80° trigon inserts

CVD Coated Carbide:CA5525,Designation:WNMG060408HQ CA5525 ANSI:WNMG332HQ Corner Radius (in):1/32,Color:Gold Carbon/Alloy Steel:Light Interruption / 2nd Choice Coating / Main Component:TiCN+Al2O3+TiN, Advantages:Application: For general machining of steel, roughing to interruption HQ:Sharp cutting performance with...

Cermet:TN60,Designation:WNMG060408HQ TN60 ANSI:WNMG332HQ Corner Radius(in) RE:1/32,Color: Gray, Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption HQ:Sharp cutting performance with 3-D rake angle and double projection design. TURNING INSERTS...

Coated:US735  Designation:WNMG060412-MA US735 RE:1.2, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Internal insert  Coated ：T9125   Designation: WNMG060412E-TM T9125 Trigon:80° ,With hole  , Corner radius:1.2  ,Medium cutting (Basic selection) Steel:(Light interrupted cutting,Heavy interrupted cutting) Garde：T9125 P20 - P30 Coating：Main composition (TiCN-Al2O3)N Thickness 16/...

Coated:US735  Designation:WNMG06T304-MA US735 RE:0.4, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Coated:US735  Designation:WNMG06T304-MS US735 RE:0.4, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the cutting resistance and reduces vibration and chip...

Coated:US735  Designation:WNMG06T308-MA US735 RE:0.8, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Coated:US735  Designation:WNMG06T308-MS US735 RE:0.8, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of difficult-to-cut materials.A wide chip pocket controls increasing of the cutting resistance and reduces vibration and chip...

Coated:US735  Designation:WNMG06T312-MA US735 RE:1.2, Rhombic,80° Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

WNMG0804 WNMG080404-99 WNMG080408-99 PM20 Carbide Inserts Turning Tools CNC Cutter WNMG 080404 080408 10pcs/box Original Package Include:10pcs/box original inserts Learning More:1.Our company mainly produces turning tool holder, carbide inserts, threading...

Coated:MC6025 Designation:WNMG080402-FP MC6025 RE:0.2,Rhombic,80° Steel:Unstable Cutting First recommendation for finishing carbon steel and alloy steel.Controls chip clogging during high-feed cutting and prevents chips of soft work materials from running onto...

Coated Cermet:T1500A ,Designation:WNMG080402N-FA T1500A  WNMG430.5EFA T1500A Nose Radius RE:.0078. Dimension (inch):Cutting Edge Length L:3425,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Steel:General Cutting 1st Recommended Turning Trigon Negative Inserts Application Range

Coated Cermet:T2000Z,Designation:WNMG080402N-FA T2000Z WNMG430.5EFA T2000Z Nose Radius RE:.0078. Dimension (inch):Cutting Edge Length L:3425,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Steel:General Cutting 2nd Recommended Turning Trigon Negative Inserts Application Range

Coated Carbide:AC6040M ,Designation:WNMG080402N-FB AC6040M  WNMG430.5EFB AC6040M Nose Radius RE:.0078. Dimension (inch):Cutting Edge Length L:3425,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Stainless Steel: Interrupted Cutting 1st Recommended Turning Trigon Negative Inserts Application Range

Coated Carbide:AC6040M ,Designation:WNMG080402N-FE AC6040M WNMG430.5EFE AC6040M Nose Radius RE:.0078. Dimension (inch):Cutting Edge Length L:3425,Thickness S:.1875.Inscribed Circle IC:.5000,Hole Dia.D1:.2031 Recommended Application:Stainless Steel: Interrupted Cutting 1st Recommended Turning Trigon Negative Inserts Application Range

MEGA COAT Cermet:PV720,Designation:WNMG080402PP PV720 ANSI:WNMG4305PP Corner Radius (in):0.08,Carbon/Alloy Steel:Light Interruption / 1st Choice Color:Gold,Coating / Main Component:TiCN(MEGACOAT NANO) Advantages:Superior wear and adhesion resistant MEGACOAT NANO on wear resistant, tough cermet,Application: First...

MEGA COAT Cermet:PV720,Designation:WNMG080402PQ PV720 Corner Radius (in):0.08,Carbon/Alloy Steel:Light Interruption / 1st Choice Color:Gold,Coating / Main Component:TiCN(MEGACOAT NANO) Advantages:Superior wear and adhesion resistant MEGACOAT NANO on wear resistant, tough cermet,Application: First choice...

CVD Coated Carbide:CA4515,Designation:WNMG080404 CA4515 ANSI:WNMG431 CA4515 Corner Radius (in):1/64 Color:Blackish Gray,Coating Layer:Thick Coating, Coating / Main Component:TiCN+Al2O3, Density:15.0,Hardness of Substrate:(HV):1.570,(GPa):15.4, Fracture Toughness (MPam1/2):12.0,Flexural Toughness (MPa):2.780   Advantages:Stable, longer tool life due to improved...

Cermet:NX2525 Designation:WNMG080404 NX2525 RE:0.4, Rhombic,80° Steel: Stable Cutting, Stainless Steel: Stable Cutting, Cast Iron: Stable Cutting

CVD Coated Carbide:PR1125,Designation:WNMG080404 PR1125  ANSI:WNMG431 PR1125 Corner Radius (in):1/64 Color:Purple Red,Coating Layer:Thick Coating, Coating / Main Component:TiAlN Advantages:Hard TiAlN base PVD coated super micro-grain carbide, superior toughness and heat resistance  Application: Finishing...

Cermet:TN60,Designation:WNMG080404 TN60 ANSI:WNMG431 CA4515  Corner Radius(in) RE:1/64,Color: Gray, Coating / Main Component: TiCN+NbC Advantages:Application: Machining of steel, continuous to interruption TURNING INSERTS (NEGATIVE)

Coated :UC5115  Designation: WNMG080404 UC5115 RE:0.4, Rhombic,80° Cast Iron:General Cutting

Cermet ：NS9530  Designation: WNMG080404-37 NS9530 Trigon:80° ,With hole , Corner radius:0.4, Steel:(Continuous cutting,Light interrupted cutting) Cast iron:(Continuous cutting,Light interrupted cutting) Garde：NS9530  Coating：Main composition (Uncoated)Feature：High fracture resistance,- Suitable for finishing to medium...

CVD Coating:YB6315,Designation:WNMG080404-ADF YB6315 WNMG431-ADF YB6315 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts

Product Name: WNMG080404-ADF YB9320 Material: YB9320 Coating Structure: High toughness matrix with TiAIN-based nano multilayer coating ISO Application Range: P10~30 Application Field: A highly versatile PVD grade suitable for fine...

CVD Coating:YBC152,Designation:WNMG080404-DF YBC152 WNMG431-DF YBC152 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC251,Designation:WNMG080404-DF YBC251 WNMG431-DF YBC251 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC252,Designation:WNMG080404-DF YBC252 WNMG431-DF YBC252 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC151,Designation:WNMG080404-DM YBC151  WNMG431-DM YBC151 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts DM:Main chip breaker for medium machining with continuous or interrupted cut of steel and...

CVD Coating:YBC152,Designation:WNMG080404-DM YBC152 WNMG431-DM YBC152 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC251,Designation:WNMG080404-DM YBC251 WNMG431-DM YBC251 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC252,Designation:WNMG080404-DM YBC252  WNMG431-DM YBC252 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC351,Designation:WNMG080404-DM YBC351 WNMG431-DM YBC351 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Unfavorable Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBD151 ,Designation:WNMG080404-DM YBD151 WNMG431-DM YBD151 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Cast iron:Normal Machining Condition Turning Cemented carbide and cermet Inserts DM:Main chip breaker for medium machining with continuous or interrupted cut...

CVD Coating:YBD152 ,Designation:WNMG080404-DM YBD152  WNMG431-DM YBD152 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Cast iron:Normal Machining Condition Turning Cemented carbide and cermet Inserts DM:Main chip breaker for medium machining with continuous or interrupted cut of steel and...

CVD Coating:YBM251,Designation:WNMG080404-DM YBM251  WNMG431-DM YBM251 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Stainless Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts DM:Main chip breaker for medium machining with continuous or interrupted cut of...

PVD Coating:YBG102,Designation:WNMG080404-EF YBG102 WNMG431-EF YBG102 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Stainless Steel:Ideal Machining Condition,Non-ferrite material:Ideal Machining Condition,Heat-resistant steel:Ideal Machining Condition. Turning Cemented carbide and cermet Inserts

PVD Coating:YBG202,Designation:WNMG080404-EF YBG202  WNMG431-EF YBG202 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

PVD Coating:YBG205,Designation:WNMG080404-EF YBG205 WNMG431-EF YBG205 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition, Turning Cemented carbide and cermet Inserts

PVD Coating:YBG202,Designation:WNMG080404-EM YBG202 WNMG431-EM YBG202 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

PVD Coating:YBG205,Designation:WNMG080404-EM YBG205 WNMG431-EM YBG205 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBM253,Designation:WNMG080404-EM YBM253 WNMG431-EM YBM253 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.4 Workpiece Material:Stainless Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts