Mitsubishi CCMT060202-FM VP15TF PVD Carbide Finishing Insert (10pcs)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
CCMT060202-FM VP15TF
Precision Finishing Specialist | Miracle PVD Coating | FM Chipbreaker
Material Science & Chip Control
VP15TF Grade (Miracle PVD): The industry-leading PVD coated carbide for General Purpose Steel, Stainless Steel, and Super Alloys. The Miracle coating provides extreme resistance to built-up edge (BUE) and notch wear, ensuring high surface integrity over long production cycles.
FM Chipbreaker (Finishing Mastery): The "FM" geometry is engineered for Fine Finishing. Its specialized rake angle and chip pocket are designed to break chips at very low feed rates and shallow depths of cut, preventing "bird-nesting" on the workpiece.
0.2mm Precision Radius: The ultra-small 02 (0.0079") radius is critical for reducing radial cutting forces. This is the primary solution for preventing chatter on slender parts and achieving tight tolerances in small-diameter boring bars.
Metric vs. Imperial Comparison
| System | Model Designation | I.C. (Inscribed Circle) | Thickness | Radius (RE) |
|---|---|---|---|---|
| Metric | CCMT060202-FM | 6.35 mm | 2.38 mm | 0.20 mm |
| Imperial | CCMT21.50.5-FM | 1/4" | 3/32" | 0.0079" |
Recommended Finishing Parameters
*The FM chipbreaker thrives in light passes. Do not exceed the maximum depth of cut to maintain chip control.
| Workpiece Material | Speed (Vc) | Feed (fn) | Depth (Ap) |
|---|---|---|---|
| Carbon/Alloy Steel | 120 - 250 m/min | 0.03 - 0.12 mm/r | 0.10 - 1.00 mm |
| Stainless Steel (304/316) | 80 - 180 m/min | 0.03 - 0.10 mm/r | 0.10 - 0.80 mm |
Pro-Tip: FM vs. MK Chipbreaker
FM (Finishing): Your first choice for light finishing. It produces a superior surface finish and prevents chip wrap-around on the part.
MK (Medium): Use MK if you need to perform semi-roughing or have varying depths of cut. For precision finishing on small lathes, the **FM** is superior.
Search Keywords: CCMT060202-FM VP15TF price, Mitsubishi finishing inserts 10pcs, CCMT21.50.5-FM PVD inserts, VP15TF speed and feed steel, micro-radius boring inserts.
Long-tail Keywords: Best carbide inserts for stainless steel finishing, Mitsubishi FM chipbreaker for small SCLCR 06 boring bars, high-precision 0.2mm radius CNC turning, CCMT 06 series VP15TF grade finishing, buy Mitsubishi CCMT060202-FM online for precision machining.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.