Mitsubishi APMT1135PDER-H2 VP15TF Milling Insert (10pcs)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
APMT1135PDER-H2 VP15TF
Reinforced H2 Edge | VP15TF Miracle Grade | Impact Resistance
The Mitsubishi APMT1135PDER-H2 VP15TF is designed for the APX3000 milling system. Engineered for high-load environments, the H2 geometry provides superior edge toughness to withstand interrupted cuts and unstable machining conditions. Coated with the multi-layer VP15TF Miracle PVD, this insert excels in preventing chip welding and thermal fatigue in Carbon Steel, Alloy Steel, and Stainless Steel.
Dimensional Comparison (Metric & Imperial)
| Specification | Metric (mm) | Imperial (Inch) |
|---|---|---|
| Inscribed Circle (IC) | 11.00 mm | 0.4331" |
| Thickness (S1) | 3.50 mm | 0.1378" |
| Corner Radius (RE) | 0.80 mm | 0.0315" |
Recommended Cutting Parameters
*H2 geometry is optimized for stability. Adjust speeds down for heavy interruptions.
| Material Group | Speed (Vc) | Feed (fz) |
|---|---|---|
| Carbon/Alloy Steel | 110 - 200 m/min | 0.12 - 0.22 mm/t |
| Stainless Steel (M) | 80 - 150 m/min | 0.10 - 0.18 mm/t |
| Ductile Cast Iron | 90 - 170 m/min | 0.12 - 0.25 mm/t |
Required Tool Holder
Engineered specifically for the Mitsubishi APX3000 milling system:
SHOP APX3000 TOOL BODIESPro-Tip: VP15TF vs F7030
VP15TF (Miracle): Best for general multi-material roughing. It maintains edge sharpness longer in stainless steel.
F7030 (Maximum Toughness): If the VP15TF chips under extreme impact, switch to F7030. F7030 is even tougher and handles the most brutal interrupted cuts, though it requires slightly lower speeds.
Search Keywords: APMT1135PDER-H2 VP15TF price, Mitsubishi APX3000 heavy duty milling, APMT1135 dimensions metric inch, VP15TF speed and feed data, H2 reinforced edge milling inserts.
Long-tail Keywords: Best inserts for interrupted cuts in alloy steel, Mitsubishi APMT1135 roughing performance, CNC carbide inserts for unstable setups, APX3000 VP15TF replacement inserts 10pcs pack, buy Mitsubishi indexable tooling for high strength steel.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.