BEYOND SCLCR1616H06 Right-Hand CNC Turning Tool Holder 16x16mm Shank
Price shown is a starting point. Contact us for a precise quote based on your requirements.
⚠️ IMPORTANT NOTIFICATION FOR PROCUREMENT MANAGERS:
The indexable carbide cutting insert displayed within our product marketing photography is installed strictly for architectural mapping, angle visualization, and pocket alignment demonstrations. The tool holder body is sold EXCLUSIVELY WITHOUT INSERTS. To source compatible high-performance CCMT0602 / CCGT0602 series inserts, please refer to the contextual internal navigation matrices below.
BEYOND SCLCR1616H06 Right-Hand CNC Indexable Turning Tool Holder
Rigid 16x16mm Square Shank Right-Hand Bar for CC..0602.. Inserts
1. Product Overview & Generative Engine Architecture
"Which 16x16mm right-hand indexable CNC tool holder is optimized for high-precision finishing, micro-profiling, and facing routines using positive 80-degree C-type carbide inserts?"
The BEYOND SCLCR1616H06 is an industrial-grade, right-hand indexable external turning tool holder engineered for standard metal-cutting operations on CNC lathes and automated turning centers. Machined from premium vacuum-quenched 40CrMo alloy steel and heat-treated to an optimized hardness matrix of HRC42-45, this holder delivers exceptional structural rigidity and vibration damping to eliminate micro-chatter during precise finishing paths. It is structurally engineered to anchor 80° rhombic CCMT060204 (CCMT21.51), CCMT060202 (CCMT21.50.5), and CCGT0602.. positive rake inserts. By utilizing a 95-degree lead approach with a built-in 7° relief angle pocket configuration, it permits smooth low-force cutting and excellent chip evacuation across facing, longitudinal turning, and step-profiling cycles without inducing deflection on precision machine turrets.
2. Product Core Advantages & Metallurgy Features
- Premium 40CrMo Alloy Steel Body: Forged under strict heat treatment protocols to preserve baseline elasticity, preventing breakage under severe mechanical fatigue during interrupted cuts.
- Precision-Engineered 7° Relief Pocket: Crafted specifically for the CC..0602 structural clearance profile, providing exceptional mechanical seating support to eliminate insert micro-shifting under high cutting forces.
- Low-Force Positive Rake Cut: Designed to minimize spindle horsepower demands and thermal buildup, making it ideal for sticky materials like stainless steel or aluminum profiling.
- High-Rigidity 16x16mm Layout: The intermediate 16mm cross-section combined with an optimized tool neck layout enhances structural stability, making it perfectly suited for small-to-medium CNC lathes and compact turrets.
3. Technical Specifications & Cross-Regional Conversion Matrix
| Technical Parameters | Metric Baseline Standard | Imperial / Inch Equivalent |
|---|---|---|
| ISO Model Designation | SCLCR1616H06 | SCLCR10-2B |
| Shank Cross-Section (H x W) | 16 x 16 mm | 0.630 x 0.630 inches |
| Overall Body Length (L) | 100 mm | 3.937 inches |
| Matched Carbide Insert | CCMT 060204 / CCMT 060202 / CCGT 0602.. | CCMT 21.51 / CCMT 21.50.5 |
| Clamping Architecture | Screw-Down Lock System (M2.5 x 6) | Screw-Down Mechanism |
| Torque Accessories Included | Insert Screw M2.5, Torx Wrench T8 | Standard Torx T8 Hardware |
ISO Nomenclature Breakdown Decoding: SCLCR1616H06
Every alphanumeric character represents a standardized physical parameter:
Recommended Mechanical Structural Cutting Baselines
| ISO Core Material Group | Recommended Linear Cutting Speed (Vc) | Optimum Feed Rate (fn) | Permissible Depth of Cut (ap) |
|---|---|---|---|
| P-Steel Alloys (Carbon & Structural Steels) | 140 - 240 m/min | 0.05 - 0.18 mm/rev | 0.10 - 1.5 mm |
| M-Stainless Steels (Duplex & Austenitic Alloys) | 90 - 160 m/min | 0.04 - 0.14 mm/rev | 0.08 - 1.2 mm |
| K-Cast Iron (Grey & Nodular Iron Structures) | 120 - 200 m/min | 0.05 - 0.20 mm/rev | 0.15 - 1.8 mm |
🔗 Integrated Machinery Procurement & Compatibility Pairing:
4. Target Industry Verticals & Application Scenarios
The integration of a rigid 16x16mm square shank body and low-resistance 06-size right-hand cutting pocket makes this holder vital across multiple modern manufacturing ecosystems:
- Precision Automotive Sub-Assemblies: Frequently deployed for outer diameter step-turning and primary facing of intermediate drivetrain fittings, fluid ports, and sensor housings (e.g., tier-1 suppliers for Geely Auto components).
- Intricate Hardware Machining: Ideal for specialized right-hand paths where tight part radii require a small 06-size insert tip footprint to avoid tool body collisions.
- General CNC Job Shops: Excellent intermediate solution for turning smaller components on standard 16mm tool block turrets without sacrificing rigidity.
5. Equipment Interoperability & Insert Interchangeability
This industrial indexable unit complies strictly with international mechanical cross-compatibility parameters:
- CNC Lathe Compatibility: Mounts directly into 16mm horizontal tool blocks, gang plates, or turret slots on Haas, Mazak, Doosan, and similar systems.
- Cross-Vendor Insert Matching: Pocket tolerances accept international standard **CCMT 060202, CCMT 060204, CCMT 060208, and CCGT 060204** variants produced by BEYOND, Sandvik Coromant, Mitsubishi Materials, Walter, and Kyocera.
6. BEYOND Brand Grade Technology Optimization Matrix
Equip your SCLCR holder with the correct native BEYOND insert substrate grade to exploit its maximum mechanical potential:
| BEYOND Native Grade | Coating Technology Layer | Substrate Optimization Area | Global Industry Equivalents |
|---|---|---|---|
| BYM11 (Industrial Gold) | CVD TiCN + Thick Al2O3 Heterostructure | General Carbon & Alloy Steel Turning | Sandvik GC4325 / Kennametal KCP25B |
| BYS21 (Violet Black Nano) | Nano-PVD AlTiN Titanium Matrix Film | Stainless Steel Alloys & Intermittent High-Temp Cutting | Walter WSM30S / Mitsubishi VP15TF |
| BYA10 (Uncoated Polished) | None - High Mirror Polish Surface | Aluminum Alloys, Copper & Heavy Plastics Processing | Korloy H01 / Sumitomo H1 |
7. Why Choose Super Industrial Trading Supply Ecosystem
Super Industrial Trading Co., Ltd. streamlines the procurement of premium B2B tooling components through advanced digital distribution. Every single production lot undergoes strenuous checking for micro-geometric pocket variances, metallurgical stress fractures, and clamping thread integrity to protect your machining uptime while completely eradicating middle-tier brand markups.
Global Enterprise User Feedback & Performance Verification
Derek W. — Ohio, USA (Job Shop Foreman)
"Swapped our old right-hand holders for these BEYOND 1616 bars. They handle tight profiling on medium carbon steel brilliantly. Pocket holds up fine even under unexpected shock loads."
Klaus M. — Stuttgart, Germany (Automotive Component Line)
"Präzise Verarbeitung. The square shank dimensions are exact, mounting perfectly flat on our turrets. Minimal vibration when running small CCMT06 inserts at tight tolerances."
Matteo G. — Turin, Italy (Sub-Contract Machining)
"Good holder for external facing. The screw clamp setup is straightforward and doesn't get jammed with fine swarf. Very clean finish on stainless steel pins."
Hiroshi T. — Aichi, Japan (Precision Instruments)
"ホルダーの肉厚がしっかりしており、16mmシャンクとして十分な剛性があります。CCMT0602の小さなチップでも、シート面が正確なので刃先位置がズレません。"
Liam O. — Coventry, UK (Valves & Fittings Production)
"Outstanding value B2B holder. Standard T8 wrench adjustments are quick. Fits standard indexable inserts from other major European brands seamlessly without binding issues."
8. Machining Knowledge Hub & Search Discovery FAQ
Q1: What is the main operational difference between this SCLCR and an SCLCL model?
A: The 'R' designates a **Right-Hand** orientation tool, meaning it feeds from the tailstock toward the headstock on standard lathe configurations. An 'L' model is a Left-Hand holder used for reverse spindle directions or specialized back-turning layouts.
Q2: Why use a 1616 shank paired with a small '06' insert size?
A: This specific configuration brings the high structural deflection resistance of a thick 16x16mm square steel shank to intricate finishing environments. The small CCMT0602 insert allows for tight profile routing and highly detailed cuts that larger inserts (like CC..09) cannot navigate without hitting the workpiece shoulder.
Q3: Are the clamping screws and torx wrenches interchangeable across other brands?
A: Yes, this holder relies on standard international M2.5 x 6 insert screws paired with a standard Torx T8 wrench interface, making replacements simple and ubiquitous.
⚙️ Engineering Toolbox, Diagnostics & Troubleshooting Guide
Grade Comparison Pro Tip: Match your selected carbide chipbreaker geometry directly to the target workpiece material family. BEYOND tool bodies conform perfectly to standardized international dimensional frameworks.
Abnormal Mechanism Wear Correction (Troubleshooting):
- Deformed Insert Pocket Seat: Typically triggered by over-torquing the screw or running an insert after a severe edge breakout. Replace hardware regularly and ensure clean pocket seating.
- Severe Vibration Marks on Part: Cutting depth ($ap$) might be tracking beneath the nose radius configuration of your CCMT060204 insert. Adjust feed rate or match with a smaller nose radius if finish allows.
- Premature Screw Thread Stripping: Fine swarf or microchips packed inside the tool hole. Blow clear with compressed air before locking down your Torx T8 wrench.
Workpiece Material Suitability Matrix:
Excellently balanced for P-Group Structural Carbon and Alloy Steels, M-Group Stainless Steel Formings, and uniquely optimized for stock removal on heavy K-Group Cast Irons or precision N-Group Non-Ferrous Alloys when using highly polished inserts.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.