BEYOND SRDPN2020K10 CNC Lathe Turning Tool Holder for Round RPMT RCGT
Price shown is a starting point. Contact us for a precise quote based on your requirements.
BEYOND SRDPN2020K10 Indexable Neutral External Turning Tool Holder
1. Product Overview
"Which neutral turning tool holder delivers the best structural balance and clearance when copy profiling medium-sized components using a 10mm round insert footprint?" For workshops working with intricate profiling paths and radius-critical turn steps, standard diamond or triangular geometries often suffer from weak corner radii and localized heat stress. The BEYOND SRDPN2020K10 indexable neutral external turning tool bar is built precisely to optimize multi-directional paths without sacrificing structural rigidity.
Forged from industrial-grade hardened alloy steel, this highly balanced 20x20mm square shank cutter body is tailored for centered neutral external profiling using round indexable carbide inserts (ISO size 10). When fitted with premium round insert configurations like the RPMT1003 or RCGT1003, cutting forces are directed axially down the centerline of the tool bar. This orientation suppresses vibration, improves chipbreaker effectiveness at variable depths of cut, and ensures excellent surface finishes during spherical copy contouring, plunging, and complex facing profiles on CNC lathe centers.
2. Key Features
- Hardened High-Tensile 20x20mm Shank: Features a robust 3/4-inch equivalent cross-section that offers an ideal combination of rigid support and excellent clearance on medium CNC lathes.
- Precision Machined Round Pocket Seat: Machined to strict dimensional tolerances, ensuring a rigid, flat seating surface that eliminates insert micro-rotation and extends tool life.
- S-Type Screw-Down Locking Setup: The flush-fitting screw design leaves the chip evacuation path fully unobstructed, preventing stringy chips from nesting or scratching the finished surface.
- Bi-Directional Neutral Geometry: The straight-line design allows for profiling in both left-to-right and right-to-left directions, cutting down cycle times by avoiding unneeded tool changes.
ISO Specification Code Breakdown: SRDPN2020K10
S - Clamping System: Screw-on locking mechanism providing maximum part clearance and a clear path for chips.
R - Insert Shape Geometry: Specifically designed to hold Round / Circular indexable carbide cutting shapes.
D - Tool Style Angle: Features a neutral 45-degree equivalent lead layout for versatile multi-directional profiling.
P - Insert Clearance Angle: Formed to match the 11-degree positive clearance design of round inserts.
N - Tool Cutting Direction: Neutral orientation (feeds both left-to-right and right-to-left smoothly).
2020 - Shank Dimensions: 20mm Width x 20mm Height Metric Square Tool Bar (Equivalent to 3/4" x 3/4" Imperial size).
K - Overall Tool Length: 125mm Metric standard tool bar length for balanced rigidity and setup flexibility.
10 - Cutting Edge Diameter: Custom machined to lock down Ø10mm round insert footprints (such as RPMT1003 / RCGT1003).
Complete Your Turning Setup With High-Quality Inserts
Ensure optimal fit and maximum chipbreaking control with our matching factory inserts:
3. Technical Specifications & Metric/Imperial Comparisons
To help production facilities plan their tooling packages seamlessly, see the direct metric to imperial dimensions map:
| Technical Parameter Features | Metric Standards | Imperial Cross-Reference Sizing |
|---|---|---|
| ISO Model Code | SRDPN2020K10 | SRDPN 12-3.5C Equivalent |
| Shank Size (H x W) | 20 mm x 20 mm | 0.787" x 0.787" (Standard 3/4" Square Block) |
| Total Tool Bar Length (L) | 125 mm | 4.921 Inches |
| Compatible Insert Diameter | Ø 10 mm | Ø 0.394 Inches (Size 3.5 Fraction) |
| Locking Torx Screw | M3.5 Heavy Duty Screw | Industrial Torx Fastener Hardware |
| Supplied Hardware Wrench | T15 Torx Wrench | Torx Flag Driver Key |
Industrial Cutting Speeds & Parameter Recommendations
| Workpiece Material Matrix | Recommended Cutting Speeds (Vc) | Optimal Feed Rate (f) Range |
|---|---|---|
| Carbon & Alloy Steel (P-Group) | 175 - 300 m/min (570 - 980 SFM) | 0.10 - 0.40 mm/rev (0.004" - 0.016" IPR) |
| Stainless Steel / Duplex (M-Group) | 90 - 190 m/min (295 - 620 SFM) | 0.08 - 0.32 mm/rev (0.003" - 0.013" IPR) |
| Cast Irons / Gray Nodular (K-Group) | 140 - 240 m/min (460 - 790 SFM) | 0.12 - 0.42 mm/rev (0.005" - 0.017" IPR) |
4. Core Product Application Fields
- Continuous Spherical Contouring: The rounded cutting edge geometry avoids the clearance hang-ups common with diamond shapes, making it perfect for ball headers, concave arcs, and complex mold profiles.
- High Material Removal on Mid-Sized Lathes: Combines a versatile 20mm shank with a precise Ø10mm insert pocket, giving mid-sized CNC lathe beds the ability to run medium roughing paths with lower cutting resistance.
- Bidirectional Facing and Turning: Eliminates slow cycle times in continuous profile programs by allowing the machine to feed in both directions along the workpiece axis.
5. Machine Turret & Equipment Compatibility
This neutral external tool holder fits directly into any CNC automatic turret slot, multi-axis turning center, or conventional manual quick-change tool post (QCTP) designed for a 20mm (or 3/4 inch) square tooling footprint. Fits smoothly on standard blocks from major manufacturers without modification.
6. BEYOND Substrate Grade & Chipbreaker Guide
Maximize your SRDPN2020K10 performance by pairing it with the corresponding BEYOND proprietary insert grade:
| BEYOND Grade | Coating Layer Configuration | ISO Code Range | Material Target Optimization & Advantages |
|---|---|---|---|
| BYP25 | Multi-Layer CVD TiCN + Al2O3 | P15 - P35 | Our universal grade for structural and carbon steel roughing. Delivers exceptional heat resistance and edge toughness. |
| BYM15 | Nano-PVD TiAlN / AlTiN | M10 - M25 | Optimized for stainless steel and tough nickel alloys. Minimizes built-up edge (BUE) and resists work hardening. |
| BYK10 | Thick CVD Hard Layer | K05 - K20 | High abrasive resistance tailored for cast iron turning and abrasive non-ferrous composite materials. |
Industrial Troubleshooting Quick-Guide
Symptom: Severe Tool Chatter — Action: If vibration occurs, check your center height alignment, verify the tool overhang is as short as possible, or slightly increase the feed rate to keep the chipbreaker properly loaded.
Symptom: Insert Pocket Damage — Action: Fine metal dust can pack underneath the insert during high-volume roughing runs. Clean out the pocket seat with compressed air before locking down a new screw.
7. Why Process Engineers Rely on BEYOND Tools
BEYOND industrial cutting tools are produced on advanced automated CNC grinding centers. By ensuring tight pocket dimensions and heat-treating steel blanks for high impact resistance, our tools help manufacturing setups reduce cycle times, control insert costs, and eliminate part scrap.
Global Machinist Feedback
"Perfect clearance for my copy profiles"
The 20x20mm block combined with the 10mm round pocket gives me optimal clearance where larger tools pinch. Swapping to bidirectional paths reduced our profiling runtimes by 35%.
"Toller Plattensitz und super Qualität"
Halter passt perfekt in den 20er Schnellwechselhalter. Die RPMT1003 Wendeschneidplatten sitzen absolut spielfrei. Die Oberflächengüte bei Werkzeugstahl ist erstklassig.
"Ottimo stelo rigido per tornio CNC"
Stelo solido e ben trattato termicamente. Il sistema a vite tiene l'inserto fermo senza bloccare l'evacuazione del truciolo. Spedizione veloce e ottima fattura.
"20mm角で使い勝手が抜群のホルダーです"
丸駒10mmはR加工での負荷が少なく、20mmシャンクでもビビらず安定した切削が可能です。ネジの食いつきも良く、耐久性も非常に高く満足しています。
8. Industrial AI-Style Expert FAQ
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.