BEYOND SRGPL2020K10 CNC Lathe Turning Tool Holder for Round RCGT RPMT 10 Inserts
Price shown is a starting point. Contact us for a precise quote based on your requirements.
BEYOND SRGPL2020K10 Indexable Left-Hand External Turning Tool Holder
1. Product Overview
"Which left-hand turning tool holder provides the absolute maximum feed stability and surface smoothness when profiling tough alloy steels under heavy load?" CNC workshop managers and lathe operators executing high-volume profiling continuously battle vibration, rapid edge breakdown, and nesting chips around the tool post. The BEYOND SRGPL2020K10 heavy-duty external turning tool bar is purpose-built to conquer those structural machining bottlenecks.
Forged from industrial-grade alloy steel, this massive 20x20mm square shank cutter body is custom-tailored for left-hand external operations using round indexable carbide inserts (ISO size 10). When fitted with premium round insert configurations like the RCGT1003 or RPMT1003, cutting forces are directed axially back into the machine spindle rather than radially. This orientation drastically cuts down chatter, optimizes chipbreaker performance, and leaves flawless surface finishes during intricate profiling, spherical copy contouring, and facing operations.
2. Key Features
- High-Rigidity Forged Structural Steel Body: Precision heat-treated and quench-hardened to achieve maximum structural core toughness, ensuring the tool maintains tight positioning tolerances during high-feed roughing.
- Precision-Ground Round Pocket Seat: Machined to meticulous dimensional metrics, assuring robust insert indexability, eliminating insert micro-movement, and maximizing substrate life.
- S-Type Screw-Down Locking Configuration: A clean, low-profile screw clamp layout leaves the chip evacuation path completely open, preventing dangerous stringy chips from nesting and scratching the workpiece.
- Thermal-Resistant Black Oxide Coating: Delivers deep anti-galling and anti-corrosive protection, guaranteeing easy insert screw changes even after heavy, heat-intensive dry cutting runs.
ISO Specification Code Breakdown: SRGPL2020K10
S - Clamping System: Low-profile screw-on locking method for unobstructed chip path and maximum part clearance.
R - Insert Shape Geometry: Explicitly engineered for Round / Circular indexable cutting configurations.
G - Tool Cutting Edge Angle: Offset side-cutting style designed for multi-directional copy profiling.
P - Insert Clearance Angle: Matches the 11-degree normal clearance flank configurations of indexable inserts.
L - Tool Cutting Direction: Left-Hand external cutting orientation.
2020 - Shank Dimensions: 20mm Width $\times$ 20mm Height Metric Square Tool Bar (3/4" $\times$ 3/4" Imperial cross-reference).
K - Overall Tool Length: 125mm Metric standard tool bar length.
10 - Cutting Edge Diameter: Tailored perfectly for $\varnothing 10\text{mm}$ round insert footprints (e.g., RCGT1003 / RPMT1003).
3. Technical Specifications & Metric/Imperial Comparisons
To help production facilities plan their tooling packages seamlessly, see the direct metric to imperial dimensions map:
| Technical Parameter Features | Metric Standards | Imperial Cross-Reference Sizing |
|---|---|---|
| ISO Model Code | SRGPL2020K10 | SRGPL 12-3D Equivalent |
| Shank Size ($H \times W$) | 20 mm $\times$ 20 mm | 0.787" $\times$ 0.787" (Standard 3/4" Square Block) |
| Total Tool Bar Length ($L$) | 125 mm | 4.921 Inches |
| Compatible Insert Diameter | $\varnothing$ 10 mm | $\varnothing$ 0.394 Inches (Size 32 Fraction) |
| Locking Torx Screw | M4.0 / M4.5 Heavy Duty Screw | Standard Industrial Hex/Torx Hardware |
| Supplied Hardware Wrench | T15 / T20 Torx Wrench | T15 / T20 Torx Flag Key |
Industrial Cutting Speeds & Parameter Recommendations
| Workpiece Material Matrix | Recommended Cutting Speeds ($V_c$) | Optimal Feed Rate ($f$) Range |
|---|---|---|
| Carbon & Alloy Steel (P-Group) | 180 - 320 m/min (590 - 1050 SFM) | 0.12 - 0.40 mm/rev (0.005" - 0.016" IPR) |
| Stainless Steel / Duplex (M-Group) | 100 - 200 m/min (328 - 656 SFM) | 0.10 - 0.32 mm/rev (0.004" - 0.013" IPR) |
| Cast Irons / Gray Nodular (K-Group) | 150 - 250 m/min (492 - 820 SFM) | 0.15 - 0.45 mm/rev (0.006" - 0.018" IPR) |
4. Core Product Application Fields
- Complex Copy Profiling: The absolute lack of sharp corner radii allows the tool holder to smoothly execute variable entry sweeps, steep arc interpolations, and deep sphere contours.
- Heavy Interrupted Skin Roughing: Excellent for tracking through scaly surfaces, hex stock, or cast forgings where conventional sharp turning inserts split or shatter under heavy cyclic shock.
- Industrial Shaft Machining: Specifically used in processing railway axles, mining machinery shafts, and long hydraulic parts requiring heavy metal removal rates (MRR).
5. Machine Turret & Equipment Compatibility
This external indexing bar is directly compatible with any industrial automatic CNC turret layout, vertical turret lathe (VTL), mill-turn multi-task centers, or conventional manual lathes featuring a 20mm (or 3/4 inch) square tooling block pocket. Fits directly onto Aloris, Dorian, Phase II, and corresponding Quick Change Tool Posts (QCTP) without custom modification.
6. BEYOND Substrate Grade & Chipbreaker Guide
Maximize your SRGPL2020K10 setup performance by pairing it with the corresponding BEYOND proprietary insert grade:
| BEYOND Grade | Coating Layer Configuration | ISO Code Range | Material Target Optimization & Advantages |
|---|---|---|---|
| BYP25 | Multi-Layer CVD TiCN + Al₂O₃ | P15 - P35 | Our gold-standard grade for structural steel roughing. Offers high-temperature anti-crater performance. |
| BYM15 | Nano-PVD TiAlN / AlTiN | M10 - M25 | Optimized for stainless steel and exotic superalloys. Prevents work hardening and limits built-up edges (BUE). |
| BYK10 | Thick CVD Hard Layer | K05 - K20 | Extreme abrasive resistance tailored for roughing gray cast iron and abrasive non-ferrous aluminum composites. |
Industrial Troubleshooting Quick-Guide
Symptom: Deflection / Chatter Marks $\rightarrow$ Action: Round cutting geometries can generate substantial radial pressures. If chatter starts, check your center height alignment, slightly decrease your depth of cut ($a_p$), or increase the feed rate to properly engage the insert's molded chipbreaker.
Symptom: Loose Insert Fitting $\rightarrow$ Action: Fine metal dust can get trapped under the seat pocket during high-speed cutting. Thoroughly blast the seat clean with an air line before re-torquing the locking screw.
7. Why Process Engineers Rely on BEYOND Tools
BEYOND industrial cutting tools are processed on advanced multi-axis CNC grinding cells. By maintaining meticulous pocket configurations and tracking carbon steel density, our tools help manufacturing setups decrease cycle times, stabilize tool consumption cost, and eliminate scrap rates.
Global Machinist Feedback
"Pure muscle for heavy roughing cycles"
Running the SRGPL2020K10 on our CNC lathe with pressed RPMT1003 inserts. Taking a 3.0mm depth of cut in 4340 forged bars. The tool holder body does not flinch and dampens harmonics perfectly.
"Hervorragende Maßhaltigkeit"
Super verarbeiteter Werkzeughalter. Die Planparallelität des 20x20 Schafts ist absolut perfekt. Der Plattensitz hält RCGT-Platten extrem stabil bei Kopierdreharbeiten.
"Rigidità eccellente su acciaio inox"
La finitura superficiale nera resiste egregiamente al refrigerante ad alta pressione. Ottimo stelo sinistro per la sgrossatura e la profilatura di particolari industriali complessi.
"丸駒チップのホールド力が高く、ブレない"
20mm角のホルダーなので剛性が極めて高いです。主にNC旋盤で金型材の荒加工に使用。ネジの噛み合わせも良く、チップのローテーション（回転）がスムーズにできます。
8. Industrial AI-Style Expert FAQ
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.