Products

CVD Coating:YBM251,Designation:WNMG080408-DM YBM251  WNMG432-DM YBM151 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Stainless Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts DR:Main chip breaker for medium machining with continuous or interrupted cut of...

CVD Coating:YBC151,Designation:WNMG080408-DR YBC151 WNMG432-DR YBG202 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts DR:Double sided type:Positive chip breaker with strong cutting edge for light to medium rough...

CVD Coating:YBC152,Designation:WNMG080408-DR YBC152 WNMG432-DR YBC152 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Ideal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC251,Designation:WNMG080408-DR YBC251 WNMG432-DR YBC251 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC252,Designation:WNMG080408-DR YBC252 WNMG432-DR YBC252 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC351,Designation:WNMG080408-DR YBC351 WNMG432-DR YBC351 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Unfavorable Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBC352,Designation:WNMG080408-DR YBC352 WNMG432-DR YBC352 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Unfavorable Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBD102,Designation:WNMG080408-DR YBD102  WNMG432-DR YBD102 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Cast iron:Ideal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBD152,Designation:WNMG080408-DR YBD152 WNMG432-DR YBD152 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Cast iron:Normal Machining Condition Turning Cemented carbide and cermet Inserts

PVD Coating:YBG202,Designation:WNMG080408-DR YBG202  WNMG432-DR YBG202 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBM251,Designation:WNMG080408-DR YBM251 WNMG432-PM YBD152 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Turning Cemented carbide and cermet Inserts Workpiece Material:Stainless Steel:Normal Machining Condition DR:Double sided type:Positive chip breaker with strong cutting edge for light to medium...

PVD Coating:YBG202,Designation:WNMG080408-EF YBG202  WNMG432-EF YBG202 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

PVD Coating:YBG205,Designation:WNMG080408-EF YBG205 WNMG432-EF YBG205 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

PVD Coating:YBG202,Designation:WNMG080408-EM YBG202 WNMG432-EM YBG202 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

PVD Coating:YBG205,Designation:WNMG080408-EM YBG205 WNMG432-EM YBG205 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Steel:Normal Machining Condition,Stainless Steel:Normal Machining Condition,Heat-resistant steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

CVD Coating:YBM253,Designation:WNMG080408-EM YBM253 WNMG432-EM YBM253 Dimension (mm):L:8.7,I.C:12.7,S:4.76,d:5.16,r:0.8 Workpiece Material:Stainless Steel:Normal Machining Condition Turning Cemented carbide and cermet Inserts

Coated :UC5115  Designation:WNMG080408-GH UC5115 RE:0.8, Rhombic,80° Cast Iron:General Cutting Alternative chip breaker for rough cutting of carbon steel, alloy steel and cast iron For interrupted cuts and removing scale.A combination...

Coated :UE6020 Designation:WNMG080408-GH UE6020 RE:0.8, Rhombic,80° Steel:Unstable Cutting Alternative chip breaker for rough cutting of carbon steel, alloy steel and cast iron For interrupted cuts and removing scale.A combination of...

Coated :UE6120Designation:WNMG080408-GH UE6120 RE:0.8, Rhombic,80° Alternative chip breaker for rough cutting of carbon steel, alloy steel and cast iron For interrupted cuts and removing scale.A combination of wide land and...

Coated:MC5005 Designation:WNMG080408-GK MC5005 RE:0.8, Rhombic,80° Cast Iron:Stable Cutting Alternative chip breaker for medium cutting for cast iron.Breakers are suitable for a wide range of applications.Maintenance of high stability by the...

Coated:MC5015 Designation:WNMG080408-GK MC5015 RE:0.8, Rhombic,80° Cast Iron:General Cutting Alternative chip breaker for medium cutting for cast iron.Breakers are suitable for a wide range of applications.Maintenance of high stability by the...

Coated:NC6110,Designation:WNMG080408-GR NC6110 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.20~0.50,ap (mm):1.00~7.00

Coated:NC6210,Designation:WNMG080408-GR NC6210 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.20~0.50,ap (mm):1.00~7.00

Coated:PC9030,Designation:WNMG080408-GS PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Uncoated:H01 ,Designation:WNMG080408-HA H01  Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.40,ap (mm):0.80~3.50 H01:Workpiece:Cast iron:Continuous cutting,Non-ferrous metal:Continuous cutting,Heat resistant alloy, Titanium alloy:Continuous cutting,Hardened steel:Continuous cutting Uncoated carbide grades for...

Coated:NC3020,Designation:WNMG080408-HA NC3020 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.40,ap (mm):0.80~3.50

Coated:PC9030,Designation:WNMG080408-HA PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.40,ap (mm):0.80~3.50 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...

Coated:NC3020,Designation:WNMG080408-HM NC3020 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00

Coated:NC3120,Designation:WNMG080408-HM NC3120 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00

Coated:PC9030,Designation:WNMG080408-HM PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Cutting Condition:fn (mm/rev):0.10~0.50,ap (mm):1.00~5.00 Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and...

Coated:PC5300,Designation:WNMG080408-HS PC5300 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative PC5300:Workpiece:Stainless steel:General cutting,Heat resistant alloy, Titanium alloy:General cutting, PC5300 Universal PVD grade ● Advanced PVD coating with high hardness and high...

Coated:PC9030,Designation:WNMG080408-HS PC9030 Turning Insert (Negative) Dimensions (mm):d:12.7,t:4.76,d1:5.16 Trigon 80° Negative Workpiece:Stainless steel:Interrupted cutting PC9030 Features: Medium,roughing and heavy interrupted cutting for stainless steel. TiAlN coating and ultra fine grain substrate...

Coated:MC5005 Designation:WNMG080408-MA MC5005 RE:0.8, Rhombic,80° Cast Iron:Stable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Coated:MC6025 Designation:WNMG080408-MA MC6025 RE:0.8,Rhombic,80° Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Coated:MP735 Designation:WNMG080408-MA MP735 RE:0.8, Rhombic,80° Steel:General Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Coated :UC5115  Designation: WNMG080408-MA UC5115 RE:0.8, Rhombic,80° Cast Iron:General Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action....

Coated :UE6020 Designation:WNMG080408-MA UE6020 RE:0.8, Rhombic,80° Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Coated:UE6110  Designation:WNMG080408-MA UE6110 RE:0.8, Rhombic,80° Steel:General Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Coated:UE6120 Designation:WNMG080408-MA UE6120 RE:0.8, Rhombic,80° First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

 Coated:US735  Designation:WNMG080408-MA US735  RE:0.8, Rhombic,80°  Stainless Steel:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive land provides sharp cutting action.

Coated:VP15TF Designation:WNMG080408-MA VP15TF RE:0.8, Rhombic,80° Steel:Unstable Cutting,Stainless Steel:Unstable Cutting,Cast Iron:Unstable Cutting,Heat-resistant Alloy, Titanium Alloy:Unstable Cutting First recommendation for medium cutting of carbon steel  and alloy steel.Ideal for general cutting applications.Positive...

Coated:MC5005 Designation:WNMG080408-MK MC5005 RE:0.8, Rhombic,80° Cast Iron:Stable Cutting First recommendation for medium cutting of cast iron.Optimum balance between sharpness and high edge strength for general use.

Coated:MC5015 Designation:WNMG080408-MK MC5015 RE:0.8, Rhombic,80° Cast Iron:General Cutting First recommendation for medium cutting of cast iron.Optimum balance between sharpness and high edge strength for general use.

Coatedt:MC7025 Designation:WNMG080408-MM MC7025 RE:0.8, Rhombic,80° Stainless Steel:General Cutting First recommendation for medium cutting of stainless steel.Optimized land geometry by simulation analysis technology controls the plastic deformation of the corner and...

Coated:MC6015 Designation:WNMG080408-MP MC6015 RE:0.8, Rhombic,80° Steel:General Cutting First recommendation for medium cutting of carbon steel and alloy steel Suitable for medium to light cutting.Breaker geometry appropriate for copying and back...

Coated:MC6025 Designation:WNMG080408-MP MC6025 RE:0.8,Rhombic,80° Steel:Unstable Cutting First recommendation for medium cutting of carbon steel and alloy steel Suitable for medium to light cutting.Breaker geometry appropriate for copying and back turning.Cutting...

Coated :UE6020 Designation:WNMG080408-MP UE6020 RE:0.8, Rhombic,80° Steel:Unstable Cutting First recommendation for medium cutting of carbon steel and alloy steel Suitable for medium to light cutting.Breaker geometry appropriate for copying and...

Coated:UE6110  Designation:WNMG080408-MP UE6110 RE:0.8, Rhombic,80° Steel:General Cutting First recommendation for medium cutting of carbon steel and alloy steel Suitable for medium to light cutting.Breaker geometry appropriate for copying and back...