BEYOND AP16/400R-80-22-2T Industrial Computer Numerical Control Indexable 90-Degree Face Milling Cutter Body (80 Millimeters / 3.15 Inches Diameter, 22 Millimeters Arbor Bore, 2 Flutes) - APKT1604 Inserts Excluded
BEYOND RAP300R-63-22-4T Indexable 90-Degree Face Milling Cutter Arbor (63mm Dia, 22mm Bore, 4 Flutes) - APMT1135 Inserts Excluded
BEYOND BAP300R 35-16-4T Indexable 90-Degree Right-Angle Face & Shoulder Milling Cutter Body (35mm / 1.38" Dia, 16mm / 0.63" Bore, 4 Flutes) - APMT1135PDER Inserts Excluded
BEYOND RAP400R-63-22-4T Indexable 90-Degree Shoulder Face Milling Cutter Arbor (63mm Dia, 22mm Bore, 4 Flutes) - APMT1604 Inserts Excluded
BEYOND BAP300R-50-22-6T Indexable 90-Degree Right-Angle Face & Shoulder Milling Cutter Body (50mm / 1.97" Dia, 22mm / 0.87" Bore, 6 Flutes) - APMT1135PDER Inserts Excluded
BEYOND BAP300R-63-22-5T Indexable 90-Degree Right-Angle Face & Shoulder Milling Cutter Body (63mm / 2.48" Dia, 22mm / 0.87" Bore, 5 Flutes) - APMT1135PDER Inserts Excluded
BEYOND VC22 Fast-Feed Aluminum Roughing Face Mill Set – 30/32/35 mm, 2-Flute, M12/M16
BEYOND BAP400R-65-22-5T Indexable 90-Degree Right-Angle Face & Shoulder Milling Cutter Body (65mm / 2.56" Dia, 22mm / 0.87" Bore, 5 Flutes) - APMT1604PDER Inserts Excluded
BEYOND KM12-80-22-5T-AL Industrial 45-Degree Aluminum-Specific Indexable Face Milling Cutter Body (80 Millimeters / 3.15 Inches Cutting Diameter, 5 Flutes) - SEKT1204/SEHT1204 Inserts Excluded
BEYOND BAP400R-85-27-6T Indexable 90-Degree Right-Angle Face & Shoulder Milling Cutter Body (85mm / 3.35" Dia, 27mm / 1.06" Bore, 6 Flutes) - APMT1604PDER Inserts Excluded
BEYOND EMR 5R63-22-4T Indexable Round Face Milling Cutter Body (63mm Dia, 22mm Bore, 4 Flutes) - RPMT1003 Inserts Excluded
BEYOND EMRW6R 63-22-4T Indexable Round Face Milling Cutter Arbor (63mm Dia, 22mm Bore, 4 Flutes) - RPMT1204 Inserts Excluded
BEYOND EMR 5R63-22-4T Indexable Round Face Milling Cutter Arbor (63mm Dia, 22mm Bore, 4 Flutes) - RPMW1003MO Inserts Excluded
BEYOND KM12-63-22-4T Industrial 45-Degree Indexable Face Milling Cutter Body (63 Millimeters / 2.48 Inches Cutting Diameter, 22mm Arbor Bore, 4 Flutes) - SEKT1204/SEHT1204 Inserts Excluded
BEYOND KM12 63-22-4T Indexable 45-Degree Face Milling Cutter Body (63mm / 2.48" Dia, 22mm / 0.87" Bore, 4 Flutes) - SEKT1604/SEHT1604 Inserts Excluded
BEYOND BAP300R 63-22-4T Indexable 90-Degree Right-Angle Face & Shoulder Milling Cutter Body (63mm / 2.48" Dia, 22mm / 0.87" Bore, 4 Flutes) - APMT1135PDER Inserts Excluded
BEYOND BAP400R 63-22-4T Indexable 90-Degree Right-Angle Face & Shoulder Milling Cutter Body (63mm Dia, 22mm Bore, 4 Flutes) - APMT1604PDER Inserts Excluded
BEYOND RAP300R-63-22-4T Indexable 90-Degree Shoulder Face Milling Cutter Arbor (63mm Dia, 22mm Bore, 4 Flutes) - APMT1135 Inserts Excluded
BEYOND AP16-400R-80-22-6T-AL Industrial 90-Degree Indexable Shoulder Milling Cutter Body (80 Millimeters / 3.15 Inches Diameter, 22 Millimeters Arbor Bore, 6 Flutes) - APKT1604 Inserts Excluded
BEYOND KM12 80-27-5T-AL Industrial 45-Degree Aluminum-Specific Indexable Face Milling Cutter Body (80 Millimeters / 3.15 Inches Cutting Diameter, 5 Flutes) - SEKT1204/SEHT1204 Inserts Excluded
BEYOND AP16-400R-80-27-6T-AL Industrial 90-Degree Indexable Shoulder Milling Cutter Body (80 Millimeters / 3.15 Inches Diameter, 27 Millimeters Arbor Bore, 6 Flutes) - APKT1604 Inserts Excluded
BEYOND BAP300R 50-22-5T Indexable 90-Degree Right-Angle Face & Shoulder Milling Cutter Body (50mm / 1.97" Dia, 22mm / 0.87" Bore, 5 Flutes) - APMT1135PDER Inserts Excluded
BEYOND EMRW 5R63-22-4T Indexable Round Face Milling Cutter Arbor (63mm Dia, 22mm Bore, 4 Flutes) - RPMT10T3 Inserts Excluded
BEYOND BAP400R 45-16-4T Indexable 90-Degree Right-Angle Face & Shoulder Milling Cutter Body (45mm / 1.77" Dia, 16mm / 0.63" Bore, 4 Flutes) - APMT1604PDER Inserts Excluded
Quick Links — Jump to Related Tooling
Face mill, shanks, drills, chamfering, T-slot, holder guide:
Indexable Milling Cutter Discs | Face Mill Bodies | BEYOND
BEYOND face mill cutter bodies for 90° shoulder, 45° aluminum, and high-feed face milling. 10 series covering 40-250mm diameter with 16-60mm bore mount.
The BEYOND milling cutter disc collection is a comprehensive range of indexable face mill cutter bodies for production face milling, square shoulder milling, and high-feed roughing. Each face mill body uses a standard face mill arbor mount (16mm to 60mm bore) and accepts replaceable carbide inserts following the ISO 1832 geometry standard. One face mill body covers a wide diameter range by changing inserts (same insert fits multiple cutter sizes within a series), making this a cost-effective alternative to dedicated solid face mills.
This collection is part of the broader BEYOND tool holder family and works with any ISO 1832 standard insert. For cylindrical shank mill bodies, see the Milling Shank Series. For face mill comparison and selection guide, see the Face Mill Hub.
10 Series Family Overview
| Series | Lead Angle | Count | Insert | Best For |
|---|---|---|---|---|
| KM12 / KM12-AL | 45° | 51 | SEKT 1204 / SEHT 1204 | Aluminum face mill, sharp polished edge |
| AP / AP16 400R | 90° | 20 | APKT 1604 | Square shoulder, harder materials |
| RAP 400R | 90° | 20 | RAPMT 1604 | High-feed square shoulder |
| MFH03R | 10-15° (high-feed) | 19 | LOGU 030310ER-GM | High-feed face milling, close-pitch |
| EMR / EMRW | 90° | 13 + 18 = 31 | APMT 1135 | End mill + face mill combined |
| BAP 300R / 400R | 90° | 18 | APMT 1135 / 1604 | BEYOND brand standard shoulder |
| SNMX | 45° | 7 | SNMX insert | Heavy-duty roughing face mill |
| TFM | 45° | 2 | TFM-specific insert | Legacy Tungaloy-compatible |
| (Generic 400R / 300R) | 90° | 63 | APMT / APKT / others | General purpose face mill |
| F1 Rough Boring Head Set | — | 1 | — | Specialty set, 2-4" range |
Lead Angle Reference
| Lead Angle | Count (approx) | Series | Best For |
|---|---|---|---|
| 10-15° (High-Feed) | ~19 | MFH03R (LOGU 030310ER-GM) | High-feed face roughing, close-pitch (3-6 mm/rev) |
| 45° (Aluminum / Universal) | ~85 | KM12, KM12-AL, SNMX, TFM | Aluminum face milling, thin chip, low cutting force |
| 75° | ~5 | specialty | Roughing where finishing pass will follow |
| 90° (Square Shoulder) | ~120 | BAP 300R/400R, AP, RAP, EMR, EMRW | Square shoulder, face milling where shoulder quality matters |
For lead angle comparison and selection guide, see the Face Milling Cutter Series hub.
Bore & Diameter Reference
| Cutter Diameter | Typical Bore | Application | Common Series |
|---|---|---|---|
| 40-50 mm | 16 mm | Small face milling, light cut | BAP 300R-40, KM12-50 |
| 50-63 mm | 22 mm | General purpose, most common | BAP 300R/400R-50/63, KM12-63 |
| 80-100 mm | 22 or 27 mm | Medium production face milling | BAP 400R-80, KM12-80/100, MFH03R-100 |
| 125-160 mm | 32 or 40 mm | Large surface face milling | BAP 400R-125, KM12-125/160 |
| 200-250 mm | 40 or 60 mm | Extra-large surfaces, planing | KM12-200/250 |
Compatible Inserts by Series
| Insert Code | Geometry | Series Used | Best Material |
|---|---|---|---|
| APMT 1135 | 80° rhombic 7° pos, 11.5mm IC | BAP 300R, EMR, EMRW | Steel P-grade, cast iron K-grade |
| APMT 1604 | 80° rhombic 7° pos, 16mm IC | BAP 400R, RAP 400R | Heavy face mill, larger cutter |
| APKT 1604 | 80° rhombic 11° pos, 16mm IC | AP16 400R | Harder materials, higher feed |
| SEKT 1204 / SEHT 1204 | 80° square 20° relief, sharp edge | KM12, KM12-AL | Aluminum (polished sharp edge for non-ferrous) |
| SEKT 1604 | 80° square | KM12-250 | Large-diameter aluminum face mill |
| LOGU 030310ER-GM | Round trigon, high-feed geometry | MFH03R | High-feed roughing steel/cast iron |
| SNMX | Square negative | SNMX-series | Heavy roughing, steel P-grade |
For grade cross-reference between Sandvik / Mitsubishi / KORLOY / etc., see the Grade Cross-Reference Hub.
Application Guide — Common Face Mill Scenarios
| Application | Recommended Series | Lead Angle | Insert | Feed Rate |
|---|---|---|---|---|
| Square shoulder steel | BAP 300R / 400R | 90° | APMT 1604 | 0.10-0.20 mm/tooth |
| Aluminum face milling | KM12-AL | 45° | SEKT 1204 (uncoated) | 0.10-0.30 mm/tooth |
| High-feed roughing steel | MFH03R | 10-15° | LOGU 030310ER-GM | 0.50-1.50 mm/tooth |
| Cast iron face milling | SNMX-series | 45° | SNMX | 0.15-0.30 mm/tooth |
| Hardened steel finishing | AP16 400R | 90° | APKT 1604 (sharp edge) | 0.05-0.12 mm/tooth |
| Large surface roughing | KM12-200 / KM12-250 | 45° | SEKT 1604 | 0.15-0.25 mm/tooth |
Cutting Parameter Guide
| Material | Cutting Speed (Vc) | Feed per Tooth (fz) | Best Insert Grade |
|---|---|---|---|
| Mild Steel (P) | 150-250 m/min | 0.10-0.25 mm/tooth | CVD-coated P-grade (NC3030, GC4325) |
| Stainless Steel (M) | 100-180 m/min | 0.08-0.15 mm/tooth | PVD-coated M-grade (VP15TF, AC6020M) |
| Cast Iron (K) | 120-220 m/min | 0.12-0.30 mm/tooth | CVD-coated K-grade (MP8015, YBC151) |
| Aluminum (N) | 300-1500 m/min | 0.10-0.30 mm/tooth | Uncoated / DLC polished (H01, G10) |
| Hardened Steel (HRC 50+) | 50-100 m/min | 0.05-0.10 mm/tooth | Cermet or whisker-reinforced |
For face mill depth-of-cut calculation and high-feed formulas, see the Speeds & Feeds Hub.
Why Choose BEYOND Milling Cutter Disc Series
- 232 SKUs in one catalog — single source for any face mill application from small 40mm shoulder milling to extra-large 250mm planing.
- 10 series, 4 lead angles — 45° aluminum (KM12), 90° shoulder (BAP 300R/400R, AP, RAP), high-feed 10-15° (MFH03R), 45° heavy roughing (SNMX). One catalog covers every face mill scenario.
- Standard face mill arbor mount — 16-60mm bore covers every common face mill holder. Works with HSK, BT, CAT, and standard milling chuck face mill arbors.
- ISO 1832 standard inserts — APMT, APKT, SEKT, LOGU, SNMX inserts all accepted. Choose grade based on your material and budget.
- Factory direct pricing — same geometry as premium brands (Sandvik, Mitsubishi, etc.) at 30-50% off OEM retail. Bulk tier discount: 2-9 pieces 6% off, 10+ pieces 12% off.
Frequently Asked Questions
1. What is the difference between 45° and 90° face mills?
45° face mills (KM12, KM12-AL) have a thinner chip and lower cutting force, ideal for aluminum and unstable setups. The 45° edge leaves a small chamfer on the workpiece that often doesn't require a finishing pass. 90° face mills (BAP 300R/400R, AP, RAP) produce a square shoulder in one pass and are used when shoulder quality matters. Choose 45° for general face milling aluminum, 90° for square shoulder on steel and cast iron.
2. What is high-feed face milling (MFH03R)?
High-feed face milling uses 10-15° lead angle inserts (LOGU 030310ER-GM) to achieve very high feed per tooth (0.5-1.5 mm/tooth vs 0.1-0.3 mm/tooth for standard face mill). The shallow lead angle creates a thin chip at high feed rate, which is more efficient for roughing large surfaces. Typical applications: roughing steel die molds, large cast iron housings, and high-volume steel plate facing.
3. Can I use the same insert across different cutter diameters?
Yes — within a series, the same insert specification fits multiple cutter diameters. For example, BAP 400R series uses APMT 1604 inserts for all diameters (50mm, 63mm, 80mm, 100mm, 125mm, etc.). The cutter body's diameter changes, but the insert pocket is the same. This simplifies insert inventory — stock one insert grade and use across the entire diameter range.
4. What's the difference between KM12 and KM12-AL?
Both are 45° aluminum face mill bodies, but KM12-AL is aluminum-specific with a polished sharp edge for non-ferrous materials. KM12 (without -AL suffix) has a slightly stronger edge preparation for harder non-ferrous or light steel. For pure aluminum 6061/7075, use KM12-AL. For cast aluminum or light steel, use KM12.
5. What is a face mill arbor and which one do I need?
A face mill arbor is the spindle-side holder that grips the face mill body via the central bore. Common arbors have 16mm / 22mm / 27mm / 32mm / 40mm / 60mm bores on the cutter side, and HSK / BT / CAT / R8 tapers on the spindle side. The cutter bore must match the arbor pilot diameter. For most 50-100mm face mills, a 22mm bore arbor works.
6. Can I get a custom diameter or bore size?
Yes. BEYOND offers custom face mill body manufacturing for non-standard diameters or bores, with a 3-piece MOQ and 3-4 week lead time. Common custom requests include 70mm, 110mm, 140mm, 175mm diameters, or special bore sizes (e.g., 19mm, 25.4mm, 31.75mm imperial). Contact sales at chao@cnchome-beyond.com or WhatsApp +86 15990663752 for a custom quote.
Internal Resources — Browse BEYOND Tooling Catalog
Explore related BEYOND tool holders, drills, and milling tools used alongside face mill cutter bodies:
BEYOND Tool Holders
Boring & Threading
Drilling
Other Milling Tools
Insert Brands (8 Global)
Resource Pages
Need a custom diameter or bore?
70mm / 110mm / 140mm / 175mm and custom metric/imperial bores available on request. 3-piece MOQ, 3-4 week lead time.
Email Sales WhatsApp +86 15990663752 Request Catalog