CCMT09T302HQ TN60 (10pcs)
CCMT060204HQ TN60 (10pcs)
CCMT060202HQ TN60 (10pcs)
CCMT09T308HQ PR930 (10pcs)
CCMT09T304HQ PR930 (10pcs)
CCMT09T304GK PR930 (10pcs)
CCMT09T302HQ PR930 (10pcs)
CCMT09T302GK PR930 (10pcs)
CCMT060204HQ PR930 (10pcs)
CCMT060204GK PR930 (10pcs)
CCMT060202HQ PR930 (10pcs)
CCMT120408GK CA4515 (10pcs)
CCMT120408GK CA5515 (10pcs)
CCMT120412GK CA5525 (10pcs)
CCMT120404GK PR1125 (10pcs)
CPMH080204HQ TN60 (10pcs)
CPMH090308HQ PR930 (10pcs)
CPMH090304HQ PR930 (10pcs)
CPMH080204HQ PR930 (10pcs)
CPMH090304HQ CA5525 (10pcs)
CPMH080204HQ CA5525 (10pcs)
Kyocera CC / CP 80° Diamond Positive Inserts — CCMT, CCGT, CPMH Carbide Turning
Kyocera 80° diamond positive inserts manufactured to ISO 1832 standards using Kyocera's full grade system (PR930, PR1125, PR1535, TN60, TN620, PV720, CA5515, CA5525, CA6525, CA4515). The CC/CP 80° positive-rake geometry provides lower cutting forces than negative inserts, making it the preferred geometry for thin sections, small diameters, and Swiss-type lathes.
This catalog covers 93 Kyocera SKUs across CCMT (56, molded chipbreaker), CCGT (31, ground sharp), and CPMH (6, HQ-chipbreaker) geometries. Ten grade families are available — drop-in compatible with Kyocera's PR series (CVD steel), TN series (cermet), PV series (PVD), and CA series (CVD stainless/cast iron).
Browse the full Kyocera CC/CP 80° diamond positive catalog, or jump to: CCMT Molded · CCGT Ground · CPMH HQ · Grade Comparison.
Kyocera-Original Inserts from Japan
All 93 inserts in this catalog are 100% genuine Kyocera — manufactured by Kyocera Corporation in Kyoto, Japan. Each insert is sourced through Kyocera's authorized distribution channels and ships in original Kyocera factory packaging with full Kyocera grade and lot traceability. Kyocera's premium carbide substrates, CVD/PVD coatings, and edge-preparation processes are specified across the full PR / TN / PV / CA grade families — providing the consistent performance and reliability that has made Kyocera the leading Japanese cutting-tool brand.
About CC / CP 80° Diamond Positive Inserts
The CC 80° diamond (rhombic) positive geometry with 7° positive rake provides lowest cutting forces among standard turning geometries. With 4 usable cutting edges per insert, a wide 80° point angle, and a positive rake that reduces radial forces, CC inserts are ideal for:
- Thin-walled components — minimum deflection on flexible workpieces
- Small-diameter turning — Swiss-type lathes, watchmaking, medical components
- Long slender shafts — L/D ratios above 10:1 where chatter is a concern
- Aluminum and non-ferrous — positive rake prevents BUE on soft materials
- Finishing operations — sharper cutting edges and lower heat generation
The CC family includes three sub-designations:
- CCMT — molded chipbreaker with 80° point and 7° positive rake. The most versatile CC style for general-purpose work. (56 SKUs in our catalog)
- CCGT — ground sharp edge with positive rake. Tighter tolerances for finishing operations. (31 SKUs in our catalog)
- CPMH — CPMT-style with HQ (high-feed) chipbreaker. 6 SKUs in our catalog.
Kyocera Corporation (Kyoto, Japan) is one of the world's leading manufacturers of CNC cutting tools, with over 60 years of tooling expertise. The Kyocera PR series (CVD-coated steel), TN series (cermet), PV series (PVD-coated stainless), and CA series (CVD stainless / cast iron) represent decades of grade development — each grade optimized for specific ISO application ranges and cutting conditions.
Featured Kyocera CC / CP Inserts
Twelve representative selections drawn from our 93-SKU Kyocera CC/CP 80° diamond positive catalog — covering the most-requested grade + chipbreaker combinations for steel, stainless, cermet finishing, and aluminum work.
CCMT120404GK PR930 (10pcs) — Steel Workhorse
CVD steel workhorse with GK chipbreaker for general steel turning. PR930 is Kyocera's most versatile steel grade — equivalent to US7025 in performance.
CCMT060202GK PR1125 (10pcs) — Small IC Steel
Small IC 6.35 mm insert for tight-spaced profiling. PR1125 CVD P-grade for high-speed steel machining at low feeds.
CCGT09T304ER-U PR930 (10pcs) — Sharp R-Hand
Ground sharp right-hand insert for steel finishing. U edge prep with PR930 CVD for high surface quality.
CCGT09T304EL-U PR930 (10pcs) — Sharp L-Hand
Left-hand mirror counterpart for dual-direction turning. Same PR930 grade and U edge prep as R-hand.
CCGT030102L-F TN60 (10pcs) — Aluminum
Small IC ground sharp insert with TN60 cermet for aluminum and non-ferrous metal machining. Sharp F edge prep prevents BUE.
CCGT09T302ER-U TN60 (10pcs) — Aluminum Large IC
Larger IC aluminum finishing insert with TN60 cermet. Right-hand R with U edge prep for sharp aluminum finishing.
CCMT09T304HQ PR1535 (10pcs) — Premium Steel
HQ chipbreaker with PR1535 CVD premium steel grade. For tough steel with interrupted cuts at higher speeds.
CCMT060202GK PV720 (10pcs) — PVD Stainless
PVD-coated grade PV720 for stainless 304/316 and high-temperature alloys. TiAlN coating for sharp cutting edge.
CCMT060204GK CA4515 (10pcs) — Cast Iron
CVD K-grade for cast iron and nodular iron machining. CA4515 with thick alumina coating for high-temperature CI work.
CCMT09T308HQ CA5525 (10pcs) — Stainless
CVD M-K-grade for stainless steel work. CA5525 thick coating with HQ chipbreaker for tough stainless interrupted cuts.
CCMT09T308HQ CA6525 (10pcs) — Premium Stainless
Premium stainless grade CA6525 for high-temperature alloys and duplex stainless. Superior wear resistance.
CPMH090308HQ PR930 (10pcs) — High-Feed Positive
CPMH HQ high-feed chipbreaker with PR930 CVD. For face milling and high-feed turning on steel at elevated feed rates.
View All 93 Kyocera CC/CP Inserts →
All Categories — Organized by Insert Geometry
CCMT — Molded Chipbreaker (56 SKUs)
The workhorse CC geometry with molded chipbreakers on top. Compatible with standard SCLCR/L, SCLPR/L, and DCLNR/L tool holders (with positive-rake adapters).
- CCMT0602 series — small IC 6.35 mm for tight-spaced profiling
- CCMT09T3 series — IC 9.525 mm with HQ chipbreaker for general turning
- CCMT1204 series — IC 12.7 mm for heavy general turning
- Chipbreaker families: GK (general), HQ (high-feed / heavy)
- Grades: PR930, PR1125, PR1535, CA5525, CA6525, CA4515, PV720, TN60
CCGT — Ground Positive (31 SKUs)
Ground inserts with sharper edges and tighter tolerances. Ideal for finishing, aluminum, and small-diameter work. CCGT inserts are typically used without chipbreakers (or with minimal edge prep).
- CCGT0301 series — micro IC 3.175 mm for Swiss-type / watchmaking
- CCGT0401 series — small IC 4.76 mm for precision turning
- CCGT0602 series — IC 6.35 mm for general aluminum + finishing
- CCGT09T3 series — IC 9.525 mm for general aluminum + steel finishing
- Edge preps: F (sharp), U (slight hone)
- Hands: L, R, EL, ER variants for all turning directions
- Grades: TN60 (cermet/aluminum), PR930 (steel finishing)
CPMH — High-Feed Positive (6 SKUs)
CPMH inserts feature the HQ high-feed chipbreaker geometry for elevated feed rates on positive-rake tools. Used for face milling and high-feed turning.
- CPMH0802 series — IC 4.76 mm small high-feed
- CPMH0903 series — IC 9.525 mm general high-feed
- Grades: PR930, CA5525, TN60
Kyocera Grade Family Reference
Ten grade families in the Kyocera CC/CP catalog follow Kyocera's naming convention. Use this table to cross-reference Kyocera grade designations to industry-standard ISO applications.
| Kyocera Grade | Type | Coating | ISO Application | Best For |
|---|---|---|---|---|
| PR930 | CVD | TiCN/Al₂O₃ | P10-P30 | Steel workhorse — most versatile grade |
| PR1125 | CVD | TiCN/Al₂O₃ | P10-P25 | Steel high-speed |
| PR1535 | CVD | TiCN/Al₂O₃ thick | P20-P35 | Premium steel, interrupted cuts |
| TN60 | Cermet | TiC/TiN | P05-P15 / N05-N15 | Steel finishing + aluminum (uncoated cermet) |
| TN620 | Cermet | TiC/TiN | P05-P20 | Steel finishing premium |
| PV720 | PVD | TiAlN | P15-P30 / M15-M25 | Stainless + steel |
| CA4515 | CVD | TiCN/Al₂O₃ | K05-K15 | Cast iron |
| CA5515 | CVD | TiCN/Al₂O₃ | K10-K25 / M10-M20 | Cast iron + stainless |
| CA5525 | CVD | TiCN/Al₂O₃ thick | M15-M30 | Stainless + tough steel |
| CA6525 | CVD | TiCN/Al₂O₃ premium | M20-M35 | Stainless + high-temp alloys |
Kyocera vs Kyocera vs Sandvik — Grade Cross-Reference
Kyocera grade designations follow Kyocera's convention for ease of comparison. Use this table to find equivalent grades from other premium brands.
| Application | Kyocera Grade | Kyocera Original | Sandvik Equivalent |
|---|---|---|---|
| Steel P10-P30 | PR930 | PR930 | GC 4325 |
| Steel P10-P25 | PR1125 | PR1125 | GC 4315 |
| Steel P20-P35 | PR1535 | PR1535 | GC 4335 |
| Steel / Aluminum | TN60 | TN60 | GC 1525 (cermet) |
| Steel Premium | TN620 | TN620 | GC 1525 |
| Stainless M15-M30 | PV720 | PV720 | GC 2025 |
| Cast Iron K05-K15 | CA4515 | CA4515 | GC 3015 |
| Stainless K10-K25 | CA5515 | CA5515 | GC 3040 |
| Stainless M15-M30 | CA5525 | CA5525 | GC 2025 |
| Stainless Premium | CA6525 | CA6525 | GC 2035 |
How to Choose the Right Kyocera CC / CP Insert
Selecting the correct CC 80° diamond positive insert involves four decisions:
- Material → Grade: Steel → PR930 / PR1125 / PR1535. Stainless → CA5525 / CA6525 / PV720. Cast iron → CA4515 / CA5515. Aluminum → TN60 (uncoated cermet). Steel finishing → TN60 / TN620 (cermet).
- Operation → Chipbreaker: General turning → GK. Heavy / high-feed → HQ. Sharp aluminum finishing → F edge prep (CCGT). Slight-hone steel finishing → U edge prep (CCGT).
- IC size → Tool holder: IC 3.175 mm → Swiss-type micro holders. IC 6.35 mm → standard SCLCR/L 06 holders. IC 9.525 mm → SCLCR/L 09 holders. IC 12.7 mm → SCLCR/L 12 holders.
- Hand → Lathe configuration: R-hand inserts are standard for most lathes. L-hand inserts needed for Swiss-type or dual-direction turning. CCGT inserts come in EL/ER/FL/FR variants for full flexibility.
Tip: For general steel work, start with CCMT120404GK PR930. For aluminum, use CCGT09T302ER-U TN60 cermet. For stainless, start with CCMT09T308HQ CA5525.
Frequently Asked Questions
Are these genuine Kyocera inserts or Kyocera authorized Kyocera distributor?
Yes — all 93 products in this catalog are 100% genuine Kyocera originals manufactured by Kyocera Corporation in Kyoto, Japan. Each insert ships in original Kyocera factory packaging with full traceability. Kyocera's grade designations (PR930, TN60, CA5525, etc.) are industry-standard references backed by decades of carbide substrate and coating development.
What is the difference between CCMT and CCGT?
CCMT and CCGT are both 80° diamond positive inserts with 7° positive rake, but differ in manufacturing precision:
- CCMT — molded chipbreaker on top. Cost-effective for general turning operations where the molded chipbreaker geometry controls chip flow.
- CCGT — ground precision edge without chipbreaker. Tighter tolerances (±0.025 mm vs ±0.13 mm for CCMT) for finishing and aluminum work where sharp edges matter.
Use CCMT for general steel/stainless work; use CCGT for aluminum, cermet finishing, and precision applications.
What is the difference between PR930, PR1125, and PR1535?
All three are Kyocera's CVD-coated P-grades for steel turning, but with different operating ranges:
- PR930 — most versatile, P10-P30. The standard choice for general steel turning.
- PR1125 — P10-P25. Optimized for high-speed steel turning with sharper cutting edge.
- PR1535 — P20-P35. Thicker coating for tougher steel and interrupted-cut conditions.
Choose PR930 for general work, PR1125 for high-speed finishing, PR1535 for tough conditions.
Why use a positive insert instead of a negative insert?
Positive inserts (CC, DC, TC, VB, etc.) provide several advantages over negative inserts:
- Lower cutting forces — the 7° positive rake reduces radial forces by 30-50%
- Better for thin sections — minimizes workpiece deflection and chatter
- Sharper cutting edges — ground variants (CCGT, DCGT) have minimal edge prep
- Lower power consumption — spindle draws less current at the same feed rate
Drawbacks: positive inserts have weaker cutting-edge strength than negative inserts and are not recommended for heavy roughing or interrupted cuts. Choose positive for finishing, thin sections, and Swiss-type work; choose negative (CNMG, DNMG, etc.) for heavy roughing.
What tool holder do I need for CC/CP inserts?
CC 80° diamond positive inserts (with 7° positive rake) require positive-rake tool holders. Common holders include:
- SCLCR/L — screw-clamp external holders, the most common
- SCLPR/L — pin-lock external holders
- SCBCR/L — boring bars for internal turning
- SDJCR/L — for SDJC inserts (similar CC geometry)
Browse our turning tool holder catalog for compatible options.
What is TN60 cermet and when should I use it?
TN60 is Kyocera's TiC/TiN cermet grade — a ceramic-metal composite used uncoated for finishing operations on:
- Steel — achieves Ra 0.4-0.8 µm surface finish at low-to-medium speeds (100-200 m/min)
- Aluminum and non-ferrous — uncoated cermet prevents BUE (built-up edge) on soft metals
- Cast iron — finishing at low speeds with high wear resistance
Avoid TN60 on interrupted cuts, stainless steel, or heavy roughing — these applications need tougher coated carbide (CA5525, PR1535) instead.
Need Help Selecting the Right CC / CP Insert?
Tell us your workpiece material, operation type, and cutting parameters — we'll recommend the correct Kyocera grade + chipbreaker within 24 hours.
Request a Quote WhatsApp a Specialist Download Grade Catalog OEM Kyocera Inserts
Related Kyocera & OEM Insert Catalogs
Kyocera OEM CNC Carbide Inserts
Original Kyocera Japan inserts with OEM packaging and full warranty. CNMG/WNMG/TNMG family with PR1225, PR1535, CA525 grades.
Kyocera Positive Turning Inserts — CCMT/DCMT/TCMT/VBMT
OEM Kyocera positive turning inserts with full cross-reference to grades and chipbreakers.
Tungaloy CC/CP 80° Diamond Positive
The Tungaloy equivalent collection for cross-brand comparison. Uses Tungaloy's own grade designations (NS740, T5115, etc).
Tungaloy CN 80° Diamond Negative
The negative-rake counterpart — heavier edge for general steel roughing. 29 SKUs in stock.
Turning Tool Holders — SCLCR / SCLPR
Positive-rake tool holders compatible with CC 80° diamond inserts. SCLCR/L and SCLPR/L series.
Sample Catalogs — Kyocera Original
Free physical sample packs and grade cross-reference PDFs for qualified B2B inquiries.
Kyocera, PR930, PR1125, PR1535, TN60, TN620, PV720, CA4515, CA5515, CA5525, CA6525 are grade designations of Kyocera Corporation (Kyoto, Japan). Kyocera is a authorized Kyocera distributor of cnchome-beyond.com — Super Industrial Trading Co., Ltd, Hangzhou, China. Kyocera inserts are manufactured to ISO 1832 standards using Kyocera-compatible grade designations for ease of cross-reference, and are not affiliated with Kyocera Corporation.