Mitsubishi APMT1604PDER-M2 F7030 Milling Insert (10pcs)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
APMT1604PDER-M2 F7030
Heavy Roughing Specialist | F7030 Impact Grade | APX4000 Large Series
The Mitsubishi APMT1604PDER-M2 F7030 is engineered for maximum material removal rates (MRR) on the APX4000 platform. The M2 chipbreaker provides a ruggedized edge geometry that excels in high-feed roughing operations. Paired with the F7030 PVD-coated grade, this insert offers the highest level of ductile toughness, preventing catastrophic failure during interrupted cuts in Alloy Steel, Stainless Steel, and Rough Castings.
Technical Specifications
| Geometric Feature | Metric (mm) | Imperial (Inch) |
|---|---|---|
| Inscribed Circle (IC) | 16.00 mm | 0.6299" |
| Thickness (S1) | 4.76 mm | 0.1874" |
| Corner Radius (RE) | 0.80 mm | 0.0315" |
Recommended Roughing Parameters
*M2 geometry handles higher chip loads. For maximum tool life, prioritize consistent feed (fz) over extreme surface speed (Vc).
| Material Condition | Speed (Vc) | Feed (fz) |
|---|---|---|
| Carbon/Alloy Steel Roughing | 100 - 180 m/min | 0.15 - 0.30 mm/t |
| Stainless Steel (Roughing) | 70 - 130 m/min | 0.12 - 0.22 mm/t |
| Interrupted Cuts / Castings | 60 - 100 m/min | 0.15 - 0.25 mm/t |
Compatible Tool Body
Maximum performance when used with high-rigidity Mitsubishi APX4000 cutters:
SHOP APX4000 HOLDERSPro-Tip: F7030 vs VP15TF
F7030 (Maximum Toughness): This is your primary grade for interrupted milling and roughing. It is more ductile than VP15TF, making it much harder to break when hitting hard spots or scale.
M2 vs M1 Breaker: The M2 is physically beefier. For axial depths of cut (Ap) greater than 4mm, always choose the M2 for improved chip control and edge security.
Search Keywords: APMT1604PDER-M2 F7030 price, Mitsubishi APX4000 roughing inserts, APMT1604 dimensions metric imperial, F7030 speed and feed data, M2 roughing chipbreaker carbide.
Long-tail Keywords: Best inserts for heavy roughing in stainless steel, Mitsubishi APMT1604 shoulder milling performance, CNC carbide inserts for deep cuts, APX4000 F7030 replacement inserts 10pcs pack, buy Mitsubishi indexable tooling for alloy steel roughing.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.