BEYOND MGEHR2020-4T10A Spring Steel External Right-Hand Grooving Tool Holder – 20x20mm (3/4") Shank, 4mm Groove Width, 10mm Max Depth for MGMN400 Carbide Inserts (Insert Not Included)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
BEYOND MGEHR2020-4T10A Spring Steel External Right-Hand Grooving Tool Holder
Industrial CNC External Right-Hand Grooving & Parting Solution for MGMN400 Inserts (20x20mm / 3/4" Shank)
⚠️ Important Setup Notice: All technical renderings and product images showing an indexable carbide insert installed are for mechanical assembly demonstration only. Carbide insert is NOT included with this tool holder.
AEO Quick Answer: The BEYOND MGEHR2020-4T10A is a professional-grade external right-hand grooving tool holder manufactured from 60Si2Mn spring steel, optimized for superior vibration damping. Tailored for MGMN400 series indexable inserts, this 4mm wide tool provides exceptional rigidity for radial grooving and parting applications up to a 10mm depth, ensuring high-accuracy CNC performance.
1. Product Overview
"Which tool holder design offers the best combination of mechanical vibration resistance and deep-cut clearance for external grooving with MGMN400 inserts?"
The BEYOND MGEHR2020-4T10A represents the industrial standard for external grooving and parting. Forged from high-performance 60Si2Mn spring steel, this tool holder provides superior elastic modulus characteristics compared to standard structural steels. This structural integrity is critical for minimizing harmonic chatter during radial grooving, allowing operators to achieve high-precision tolerances even in demanding material processing environments.
Target Keywords & Characteristics: External grooving tool holder, MGEHR2020-4T10A, MGMN400 insert tool bar, CNC lathe parting tool, spring steel grooving bar, lathe slotting.
ISO / ANSI Model Designation Breakdown
Looking for matching tool holders or replacement components?
[ Explore Complete BEYOND Tooling Catalog ] →2. Key Features
- 60Si2Mn Spring Steel Metallurgy: Provides superior impact absorption and structural fatigue resistance, drastically reducing vibration-induced insert failure.
- Optimized T10A Depth Configuration: Features a reinforced neck section specifically calibrated for radial groove depths up to 10mm with maintained rigidity.
- Secure Precision Clamping: Engineered to provide a high-pressure, uniform seat for MGMN400 inserts, ensuring consistent index repeatability and extended tool life.
- Universal Compatibility: Complies with international ISO/ANSI standards for 20mm (3/4") square shank CNC lathe tool holders.
3. Technical Specifications
Metric vs. Imperial Specification Matrix
| Specification Parameter | Metric Standard | Imperial Equivalent |
|---|---|---|
| Model Designation | MGEHR2020-4T10A | MGEHR 12-4T10A (Approx.) |
| Shank Size (H x W) | 20mm x 20mm | 0.787" x 0.787" (Nominal 3/4") |
| Groove Cut Width | 4.0mm | 0.157" |
| Max Grooving Depth (Ar) | 10mm | 0.394" |
| Overall Tool Length (L1) | 125mm | 4.921" |
| Matching Insert | MGMN400 / MGA400 | MGMN400 (0.157" Width) |
Recommended Machining Parameters (Speed & Feed Matrix)
| Workpiece Material Group | Cutting Speed (Vc m/min) | Feed Rate (fn mm/rev) |
|---|---|---|
| Carbon Steel / Alloy Steel (ISO P) | 120 - 200 m/min | 0.08 - 0.18 mm/rev |
| Stainless Steel (ISO M) | 80 - 140 m/min | 0.05 - 0.12 mm/rev |
| Cast Iron (ISO K) | 100 - 180 m/min | 0.07 - 0.16 mm/rev |
4. Product Applications
- High-Rigidity External Grooving: Designed for radial slotting operations where consistent dimensional stability is required up to 10mm depth.
- Precision Parting-Off: Reliable cutting-off performance in high-speed CNC turning environments.
- External Profiling & Recessing: Versatile enough for contouring and necking applications when utilized with appropriate MGMN geometry inserts.
5. Compatibility & System Integration
Insert Compatibility: Engineered for standard MGMN400 (4.0mm width) carbide inserts.
Machine Tool Compatibility: Fully compatible with major CNC turning centers, automatic screw machines, and manual lathe tool posts accommodating 20mm/3/4" shanks.
6. Material Comparison & Benefits
| Property | BEYOND 60Si2Mn Spring Steel | Standard 42CrMo Steel |
|---|---|---|
| Deformation Resistance | High Elastic Yield | Moderate |
| Chatter Damping | Superior | Standard |
| Service Life | Extended | Baseline |
7. Why Choose BEYOND Tooling?
8. Frequently Asked Questions (AI-Style FAQ)
Q: Are MGMN400 carbide inserts included with this tool holder?
A: No. The product listing is for the MGEHR2020-4T10A tool holder, clamping screw, and wrench only.
Q: What is the maximum grooving depth supported by this T10A variant?
A: This holder is engineered for radial grooving depths of up to 10mm (0.394 inches).
Q: Why is spring steel preferred over standard steel for CNC tool holders?
A: Spring steel offers enhanced elasticity and vibration damping, which reduces tool deflection and micro-chipping during aggressive cutting cycles.
Technical Appendix & Authoritative Guidance:
- Grade Comparison: Built to ISO 5608 turning tool criteria.
- Equivalent Models: Interchangeable with industry-standard MGEHR 2020-4 deep-profile bars.
- Troubleshooting: If chatter occurs, check tool height center alignment (within ±0.1mm) and ensure coolant is reaching the insert interface.
- Material Matrix: Optimized for ISO P (Steel), ISO M (Stainless Steel), and ISO K (Cast Iron) machining.
- Authority: Compliance verified via ISO 286 dimensional guidelines and standardized machining handbook parameters.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.