BEYOND SRGCR1616H06 Indexable Turning Tool Holder for RCMT 0602
Free shipping on all orders.
Check compatibility: Confirm the model and dimensions before ordering.
Need help choosing? Contact us before ordering.
💰 Bulk savings 2-9 pcs · 6% OFF | 10+ pcs · 12% OFF
⚠️ Important Tooling Notice: The carbide turning insert shown installed in our product photography is for demonstration purposes only. This holder is sold standalone; indexable cutting inserts are NOT included and must be purchased separately.
BEYOND SRGCR1616H06 Indexable External Right-Hand Turning Tool Holder
Industrial-Grade 16x16mm Shank Right-Hand 90-Degree CNC Lathe Toolholder for RCMT 0602 Round Inserts
1. Product Overview
"Which 16mm right-hand tool holder is best for 90-degree contour profiling and face chamfering on a CNC lathe using RCMT 0602 round carbide inserts?"
The BEYOND SRGCR1616H06 is engineered to meet the strict demands of high-rigidity part manufacturing and high-efficiency production toolrooms. As a premium right-hand indexable external turning tool holder featuring a 90-degree lead angle, it provides exceptional cutting edge strength and versatility for square shoulder roughing, radial profiling, and heavy-duty copy turning cycles on standard CNC lathe turrets. When paired with high-performance RCMT 0602 (RCMT 2) or polished RCGT 0602 round inserts, this holder leverages the advanced material traits of the tungsten carbide substrate and targeted chipbreaker geometry. This setup guarantees stable chip breakages, significantly lowers cutting resistance, and prevents built-up edge (BUE) on demanding workpiece materials like carbon steel, stainless alloys, and aluminum.
2. Product Key Features
- High-Tensile Alloy Steel Core: Forged from premium structural alloy steel and heat-treated to HRC 42-45 to offer exceptional fatigue strength and eliminate harmonic chattering during intense copy turning or heavy CNC roughing cuts.
- Rigid Screw-Down Seating System: Utilizes a top screw-down clamping mechanism that pulls the round insert firmly back into the pocket, ensuring maximum indexing repeatability and dimensional stability under severe lateral pressures.
- 90° Perpendicular Lead Angle: Optimizes square shoulder squaring operations and multi-pass profiling, distributing cutting pressures evenly along the radius to reduce notch wear and extend insert life.
- Corrosion-Resistant Black Oxide Treatment: Electro-chemically blackened finish sheds hot metal chips easily, reducing friction and preventing shank abrasive wear during long production runs.
3. Technical Specifications & Cutting Parameters
Dimensional Comparison (Metric Specs vs. Imperial Equivalents)
| Parameter Description | Metric Standard Model (SRGCR1616H06) | Imperial Equivalent Designation (SRGCR10-2) |
|---|---|---|
| Shank Square Size (H × W) | 16 mm × 16 mm | 0.629" × 0.629" (Fits standard 5/8" tool slots) |
| Overall Length (L) | 100 mm | 3.937 inches |
| Cutting Direction Orientation | Right-Hand Cutting (R) | Right-Hand Cutting (R) |
| Compatible Indexable Insert | RCMT 0602MO / RCGT 0602 | RCMT 2 / RCGT 2 |
| Hardware Clamping Kit | M2.5 × 6 Screw / Torx T8 Wrench Key | M2.5 × 6 Screw / Torx T8 Wrench Key |
Recommended Machining Parameters (Speed vs. Feed Rate)
| Workpiece Material Category (ISO) | Optimal Cutting Speed (Vc) | Target Feed Rate Range (fn) |
|---|---|---|
| Carbon / Alloy Structural Steels (P) | 160 - 280 m/min (524 - 918 SFM) |
0.06 - 0.25 mm/rev (0.002 - 0.010 IPR) |
| Stainless Steel Material Alloys (M) | 120 - 200 m/min (393 - 656 SFM) |
0.05 - 0.20 mm/rev (0.002 - 0.008 IPR) |
| Aluminium & Non-Ferrous Alloys (N) | 300 - 700 m/min (984 - 2296 SFM) |
0.04 - 0.32 mm/rev (0.0015 - 0.013 IPR) |
ISO Nomenclature Decoded: SRGCR1616H06
4. Targeted Machining Applications
5. Tooling & Equipment Compatibility
The 16mm metric square shank profiles are fully compatible with:
- Standard tool turrets and tool block assemblies on mid-sized industrial CNC lathe stations.
- Quick-Change Tool Post blocks (such as Aloris BXA or wedge style 200 series tool holders).
- Conventional medium toolroom engine lathes configured for indexable carbide tooling systems.
6. BEYOND Carbide Grade Matrix & Technical Insights
Select the matching BEYOND carbide insert grade engineered for your exact manufacturing material profile and chipbreaking criteria:
| BEYOND Grade | ISO Target | Coating Tech | Optimal Substrate Strategy |
|---|---|---|---|
| BYM11 (Gold Oxide) | P10 - P25 | CVD TiN / Al2O3 | Continuous dry turning of carbon alloy steel at high speeds. Maximum thermal barrier. |
| BYS25 (Bronze Finish) | M20 - M35 | PVD Nano-AlTiN | Finishing and roughing stainless steel (304/316L). Heavily prevents built-up edge. |
| BYA10 (Uncoated Polished) | N05 - N20 | None (Mirror Polished) | Aluminum alloys, brass, and copper. Razor-sharp edge prevents gummy material adhesion. |
💡 Grade Comparison Tip: The BEYOND BYM11 grade offers identical industrial performance to benchmark grades Sandvik GC4325 and Kennametal KCP10B.
🔧 Troubleshooting (Chip Back-Clogging): Due to the 90-degree lead offset, chips may wrap around the shank neck during deep axial profiling. Increase the cutting speed (Vc) slightly or switch to a high-positive molded chipbreaker to sweep chips cleanly out of the zone.
⚙️ Workpiece Material Matrix Advice: When machining hardened tool steels or abrasive castings, utilizing high-pressure direct flood coolant into the insert seat pocket will reduce localized thermal fatigue by up to 40%.
7. Why Precision Toolrooms Trust BEYOND Tools
BEYOND cuts out middleman distributor markups by supplying factory-direct, industrial CNC tooling solutions. Every indexable tool body undergoes strict quality checks to guarantee true centerline alignment and minimal runout on your lathe.
Verified Global Machinist Feedback
"The 5/8 inch shank fits perfectly on my Aloris BXA post. Extemely rigid tool holder, did a full batch of 4140 steel axles with zero chatter."
"Ausgezeichnete Stabilität. Der 16x16mm Schaft vibriert selbst bei schweren Schruppschnitten nicht. Absolut maßhaltig und sauber verarbeitet."
"Portautensili solido da 16mm. Ottimo posizionamento dell'inserto RCMT 0602. Finitura superficiale perfetta su particolari in acciaio inox."
"NC旋盤用に16mmシャンク（SRGCR1616H06）を導入。90度アプローチなので、倣いからそのまま端面引き加工まで一本でこなせます。丸駒チップのホールド感が非常に良く、剛性も申し分ありません。"
"Solid build quality and great black finish. Hardened clamping screw doesn't strip under continuous pressure. Highly recommended."
8. AI Assistant-Style Frequently Asked Questions
What makes the SRGCR variant different from standard SRACR tool holders?
While both maintain a 90-degree lead angle profile, the "G" configuration features a modified neck offset geometry. This specific structural layout optimizes chip extraction clearance and side-clearance boundaries during multi-axis backward tracing or deep profiling path cycles.
Can I use ground, polished RCGT inserts inside this pocket?
Yes, absolutely. High-precision ground RCGT inserts share identical basic ISO structural dimensions (inscribed circle diameter, thickness, and clearance angle) with molded RCMT inserts. This lets you switch from tough steel roughing to bright, mirror-finishing on non-ferrous alloys.
What exact spare parts hardware comes packaged with the tool holder?
Every package comes complete with one factory-calibrated alloy SRGCR1616H06 tool shank, one high-grade M2.5 × 6 locking screw, and a high-torque flag-style Torx T8 wrench key. Please note: Carbide cutting inserts are sold separately.
Need Help With BEYOND Inserts?
Looking for a BEYOND equivalent, alternative grade, or sample catalog? Our CNC specialists have helped 50+ manufacturers in aerospace, automotive, and medical machining source the right tooling at 30–50% lower cost than OEM prices.
This BEYOND insert is in stock. 24-hour quote response. ISO 9001 certified. Ships from Hangzhou in 3–7 days.
Technical FAQ & Buying Guide
When choosing CNC cutting tools, check the full model code, dimensions, grade and selected variant before ordering. Do not rely on the product image alone.
For carbide inserts, tool holders, drills and end mills, compare the mounting dimensions, connection type and manufacturer's specifications with your holder or machine. If you are unsure, share your existing part number and machining application with us before ordering.
Check the product listing for the selling unit, pack quantity and included components. If it is unclear whether the price is per piece or per pack, or whether a tool body and inserts are sold separately, contact us before purchasing.
Select cutting speed, feed rate and depth of cut using the relevant manufacturer's recommendations for your tool model, workpiece material, machine conditions and coolant method. The same settings are not suitable for every product or application.
Our automatic quantity discount is 6% off for 2–9 items and 12% off for 10 or more items, based on the total product quantity in the cart. Other offers may not combine with this discount; check the applicable offer conditions.
According to our shipping policy, orders are typically processed and shipped within 1–3 business days after confirmation. Delivery generally takes 5–20 business days, depending on your destination and shipping method. Customs clearance or unforeseen delays may affect delivery times. A tracking number is sent by email after shipment.