Mitsubishi CCGT04T002L-F NX2525 Cermet Finishing Insert (10pcs)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
CCGT04T002L-F NX2525
Micro-Precision Finishing | NX2525 Cermet | 0.2mm Corner Radius
Technical Specifications Analysis
NX2525 Grade (TiCN Cermet): This Titanium Carbonitride-based grade is designed for high-speed finishing. Unlike standard carbide, the NX2525 cermet has a low chemical affinity for steel, which virtually eliminates Built-Up Edge (BUE). This allows for significantly higher cutting speeds and results in a glossy, mirror-like surface finish.
L-F Chipbreaker (Left-Hand Finishing): Specifically designed for miniature workpieces. The L-F geometry features a ground-in sharp edge that excels at ultra-light Depths of Cut (DOC). It provides exceptional chip control in Swiss-type automatic lathes, preventing chip entanglement during high-cycle production.
Metric vs. Imperial Comparison
| System | Model Designation | I.C. (Inscribed Circle) | Thickness | Radius (RE) |
|---|---|---|---|---|
| Metric | CCGT04T002L-F | 4.76 mm | 3.97 mm | 0.20 mm |
| Imperial | CCGT1.5(1.2)0.5L-F | 0.187" (3/16") | 0.156" (5/32") | 0.0079" |
Recommended Finishing Parameters
*The 0.2mm radius is sensitive to feed rates. Exceeding recommended feed can diminish surface quality or lead to edge failure.
| Workpiece Material | Speed (Vc) | Feed (fn) | Depth (Ap) |
|---|---|---|---|
| Mild & Carbon Steel | 180 - 350 m/min | 0.02 - 0.10 mm/r | 0.05 - 0.50 mm |
| Alloy Steel (Hardened) | 120 - 240 m/min | 0.03 - 0.08 mm/r | 0.05 - 0.35 mm |
Required Tool Holder
Maximum stability for Miniature SCLCL Swiss-type holders and micro-boring bars:
Shop SCLC Mini ToolingPro-Tip: NX2525 vs VP15TF
NX2525 (Cermet): This is your "Mirror Finish" specialist. Ideal for high-speed, continuous finishing where appearance and dimensional accuracy are paramount.
VP15TF (PVD Carbide): Switch to VP15TF if you encounter interrupted cuts, vibration, or are machining gummy 300-series Stainless Steels. Carbide is tougher and prevents the edge from chipping in unstable conditions.
Search Keywords: CCGT04T002L-F NX2525 price, Mitsubishi micro cermet inserts, CCGT1.5(1.2)0.5L-F imperial equivalent, NX2525 speed and feed chart, Left-hand micro-finishing chipbreaker.
Long-tail Keywords: Best inserts for mirror finish on Swiss lathe parts, Mitsubishi CCGT 4.76mm IC cermet inserts, CNC micro-turning cermet inserts 10pcs, SCLCL miniature boring bar replacement inserts, buy Mitsubishi NX2525 cermet online.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.