Mitsubishi CCGT04T002L-F VP15TF Carbide Finishing Insert (10pcs)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
CCGT04T002L-F VP15TF
Miniature Precision Finishing | Miracle PVD Coating | 0.2mm Radius
Technical Specifications Analysis
VP15TF Grade (Miracle PVD Carbide): This grade features a high-toughness micro-grain carbide substrate paired with Mitsubishi’s proprietary Miracle (Al-Ti-N) PVD coating. Unlike brittle cermets, VP15TF is engineered for versatility. It excels in resisting built-up edge (BUE) in gummy materials and provides superior impact resistance for interrupted cuts or unstable setups common in micro-boring.
L-F Chipbreaker (Left-Hand Finishing): The "F" series is a precision-ground, sharp-edged geometry designed for Ultra-Light Finishing. The 0.2mm corner radius is specifically designed for surgical accuracy in tight corners. It ensures excellent chip breaking at extremely low feed rates, preventing surface damage from chip wrap-around.
Metric vs. Imperial Comparison
| System | Model Designation | I.C. (Inscribed Circle) | Thickness | Radius (RE) |
|---|---|---|---|---|
| Metric | CCGT04T002L-F | 4.76 mm | 3.97 mm | 0.20 mm |
| Imperial | CCGT1.5(1.2)0.5L-F | 0.187" (3/16") | 0.156" (5/32") | 0.0079" |
Recommended Cutting Parameters
*The 0.2mm radius is ideal for high-precision finishing. Avoid excessive feed rates to maintain the sharp cutting edge.
| Workpiece Material | Speed (Vc) | Feed (fn) | Depth (Ap) |
|---|---|---|---|
| Stainless Steel (300 series) | 60 - 140 m/min | 0.02 - 0.08 mm/r | 0.05 - 0.50 mm |
| Alloy Steel / Carbon Steel | 80 - 180 m/min | 0.03 - 0.10 mm/r | 0.10 - 0.60 mm |
| Titanium Alloys | 30 - 65 m/min | 0.02 - 0.07 mm/r | 0.05 - 0.40 mm |
Required Tool Holder
Engineered specifically for Miniature SCLCL Swiss-type holders and micro-boring tools:
Shop SCLC Miniature HoldersPro-Tip: VP15TF vs NX2525
VP15TF (PVD Carbide): This is your "Edge Security" specialist. Use it for stainless steels, titanium, or interrupted finishing where cermet might chip. It is much more forgiving in non-rigid setups.
NX2525 (Cermet): Only switch to cermet for Continuous Finishing in steel to achieve a mirror finish. Cermet will fail if used in gummy alloys or interrupted cuts where VP15TF thrives.
Search Keywords: CCGT04T002L-F VP15TF price, Mitsubishi miniature carbide inserts, CCGT1.5(1.2)0.5L-F imperial specifications, VP15TF speed and feed for Swiss lathes, Left-hand finishing carbide micro-inserts.
Long-tail Keywords: Precision carbide inserts for small diameter stainless boring, Mitsubishi CCGT 4.76mm IC carbide inserts, CNC Swiss lathe finishing inserts VP15TF, SCLCL small-series 0.2mm radius inserts, buy Mitsubishi VP15TF miniature carbide online.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.