Mitsubishi CCGT04T004L-F VP15TF Carbide Finishing Insert (10pcs)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
CCGT04T004L-F VP15TF
Miniature Precision Specialist | Miracle PVD Coating | 0.4mm Radius
Technical Breakdown
VP15TF Grade (Miracle PVD Carbide): This premium grade utilizes a high-toughness micro-grain carbide substrate combined with Mitsubishi's proprietary Miracle (Al-Ti-N) PVD coating. It is specifically engineered to handle interrupted cuts and heat generation in gummy materials. Unlike cermet, VP15TF provides the edge security needed for Stainless Steel, Titanium, and Heat-Resistant Alloys.
L-F Chipbreaker (Left-Hand Finishing): A precision-ground, sharp-edged geometry designed for Ultra-Light Finishing. The "F" series ensures excellent chip breaking at extremely fine feed rates. The 0.4mm corner radius provides a more robust cutting edge, allowing for higher feed rates and better tool life compared to the 0.2mm radius.
Metric vs. Imperial Comparison
| System | Model Designation | I.C. (Inscribed Circle) | Thickness | Radius (RE) |
|---|---|---|---|---|
| Metric | CCGT04T004L-F | 4.76 mm | 3.97 mm | 0.40 mm |
| Imperial | CCGT1.5(1.2)1L-F | 0.187" (3/16") | 0.156" (5/32") | 0.0157" (1/64") |
Recommended Cutting Parameters
*The 0.4mm radius allows for increased feed rates (fn) while maintaining high surface integrity. Ideal for 300-series Stainless Steel.
| Workpiece Material | Speed (Vc) | Feed (fn) | Depth (Ap) |
|---|---|---|---|
| Stainless Steel (304/316) | 70 - 150 m/min | 0.04 - 0.12 mm/r | 0.05 - 0.60 mm |
| Alloy Steel / Tool Steel | 90 - 200 m/min | 0.05 - 0.15 mm/r | 0.10 - 0.70 mm |
| Titanium Alloys | 35 - 75 m/min | 0.03 - 0.08 mm/r | 0.05 - 0.40 mm |
Required Tool Holder
Maximum stability for Miniature SCLCL Swiss-type holders and micro-boring tools:
Shop SCLC Miniature HoldersPro-Tip: VP15TF vs NX2525
VP15TF (PVD Carbide): Your first choice for reliability. Use this for interrupted cuts, stainless steel, and titanium. It prevents chipping where cermet would fail.
NX2525 (Cermet): Use this only for continuous finishing of steel when you need a "jewelry grade" mirror finish. If the cut is interrupted or the material is tough, stay with VP15TF.
Search Keywords: CCGT04T004L-F VP15TF price, Mitsubishi miniature carbide inserts, CCGT1.5(1.2)1L-F imperial equivalent, VP15TF speed and feed for Swiss turning, Left-hand micro-finishing carbide 0.4 radius.
Long-tail Keywords: Best inserts for precision stainless turning on Swiss lathes, Mitsubishi CCGT 4.76mm IC carbide inserts, CNC Swiss lathe finishing inserts VP15TF 10pcs, SCLCL small-series 0.4mm radius carbide inserts, buy Mitsubishi VP15TF miniature carbide online.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.