Mitsubishi CCMT060208 VP15TF Miracle Coated Universal Turning Insert (10pcs)
Price shown is a starting point. Contact us for a precise quote based on your requirements.
CCMT060208 VP15TF
The Miracle Grade Universal Workhorse | PVD Coated | 0.8mm Radius
Material Science & Edge Toughness
VP15TF Grade (Miracle PVD Coating): This is Mitsubishi’s premier Universal Grade. It is designed to perform across **ISO P (Steel), ISO M (Stainless), ISO K (Cast Iron), and ISO S (Super Alloys)**. The Miracle coating is an Al-Ti-Cr-N based PVD coating that offers exceptional adhesion to the carbide substrate, preventing peeling and providing a smooth surface that resists chip welding.
0.8mm Productivity Radius: The 08 radius (1/32") is engineered for High-Feed Semi-Roughing. It provides a robust cutting edge that can handle significantly higher chip loads than smaller radii. This results in faster cycle times and better tool life in unstable setups or interrupted cuts.
Metric vs. Imperial Comparison
| System | Model Designation | I.C. (Inscribed Circle) | Thickness | Radius (RE) |
|---|---|---|---|---|
| Metric | CCMT060208 | 6.35 mm | 2.38 mm | 0.80 mm |
| Imperial | CCMT21.52 | 1/4" | 3/32" | 0.0315" |
Recommended Cutting Parameters
*The 0.8mm radius allows for aggressive feed rates. Maintain rigid setup for best results.
| Material Group | Speed (Vc) | Feed (fn) | Depth (Ap) |
|---|---|---|---|
| Steel (P) | 140 - 280 m/min | 0.10 - 0.25 mm/r | 0.50 - 2.00 mm |
| Stainless (M) | 100 - 180 m/min | 0.08 - 0.20 mm/r | 0.50 - 1.50 mm |
Required Tool Holder
Maximum performance for SCLCR/L 06 series external tools and boring bars:
Shop SCLCR 06 HoldersPro-Tip: VP15TF vs VP10MF
VP15TF (Universal): The Go-To Choice. It is tougher and more versatile than VP10MF. Use it for everything from mild steel to heat-resistant alloys.
VP10MF (Fine Finish): Choose VP10MF only for ultra-stable finishing on nickel-based alloys or when you require absolute maximum wear resistance at the cost of toughness. For 95% of job shop work, **VP15TF** is the superior investment.
Search Keywords: CCMT060208 VP15TF price, Mitsubishi miracle carbide 10pcs, CCMT21.52 universal grade, VP15TF feed and speed steel, industrial CNC lathe inserts.
Long-tail Keywords: Best universal carbide inserts for job shops, Mitsubishi miracle PVD coating for stainless steel, high toughness 0.8mm radius boring inserts, CCMT 06 series VP15TF grade for steel and cast iron, buy Mitsubishi VP15TF online for CNC production.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.