Mitsubishi DCMT070208-MV UE6020 Carbide Turning Insert for Steel
Price shown is a starting point. Contact us for a precise quote based on your requirements.
DCMT070208-MV UE6020
Steel Production Specialist | UE6020 CVD Coating | MV Versatile Geometry
Engineered for High-Speed Reliability
UE6020 Grade (The Steel Expert): The UE6020 is a premier CVD-coated carbide grade specifically for P-Class (Steel) materials. It features a multi-layered coating that provides a hard exterior for wear resistance and a tough interior to prevent fracture. It excels in stable, continuous cutting where high surface speeds are required to meet production targets.
MV Chipbreaker (Medium-V Finishing): The MV geometry is Mitsubishi's most balanced chipbreaker. It provides a sharp cutting action to reduce heat buildup while maintaining enough edge strength for semi-finishing tasks. It effectively controls chips across a broad range of speeds, preventing "bird-nesting" during automated cycles.
0.8mm Radius (High Feed & Strength): The "08" (1/32") radius is the choice for durability. It allows for higher feed rates ($fn$) while maintaining edge integrity. This radius is perfect for semi-finishing or finishing where the material has a slightly rough surface or where maximum tool life is the priority over ultra-fine detail.
Metric vs. Imperial Comparison
| System | Model Designation | I.C. (Inscribed Circle) | Thickness | Radius (RE) |
|---|---|---|---|---|
| Metric | DCMT070208-MV | 6.35 mm | 2.38 mm | 0.80 mm |
| Imperial | DCMT21.52-MV | 1/4" | 3/32" | 0.0315" (1/32") |
Recommended Machining Parameters
*UE6020 is designed for high-speed efficiency. Optimal results are achieved in continuous cutting with flood coolant.
| Workpiece Material | Speed (Vc) | Feed (fn) | Depth (Ap) |
|---|---|---|---|
| Mild Steel (1018/1020) | 160 - 380 m/min | 0.10 - 0.25 mm/r | 0.40 - 2.00 mm |
| Carbon Steel (1045) | 130 - 320 m/min | 0.08 - 0.22 mm/r | 0.30 - 1.50 mm |
Compatible Tool Holders
Maximum productivity with 07-series SDJCR/L or SDUCR/L holders:
Shop 07 Series HoldersPro-Tip: UE6020 vs. US735
UE6020 (CVD): Optimized for carbon and alloy steel. It handles heat much better than other grades, allowing for the highest speeds.
US735 (CVD): Switch to US735 ONLY if you are machining stainless steel or if your cut is heavily interrupted. UE6020 is too "hard" for high-impact stainless work but superior for continuous steel turning.
Search Keywords: DCMT070208-MV UE6020 price, Mitsubishi steel turning inserts, DCMT21.52-MV carbide, UE6020 feed rates, high productivity steel inserts.
Long-tail Keywords: Best carbide inserts for high speed CNC steel turning, Mitsubishi UE6020 0.8mm radius tool life, DCMT 070208-MV for alloy steel semi-finishing, durable CVD coated steel inserts for CNC lathe, buy genuine Mitsubishi UE6020 online.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.