FREE Worldwide Shipping
Description
MFWN-Mini End Mill (Metric)
How to Mount Inserts
1. Completely eliminate chips and dust from the insert mounting side
2. Coat anti-seize compound thinly on portion of taper and thread of clamp screw prior to installation.
After mounting a clamp screw on the top edge of wrench, tighten the screw while keeping the insert pushed against the insert seat surface and
holder surface (Fig.1)
3. Tighten the wrench while holding parallel to the clamp screw.
Recommended tightening torque . . . 1.2 Nm
4. After tightening, check that there is no gap between the contact surface of the insert and the surface of the insert seat, or between the side surface of
insert and the holder surface. If there is a gap, remount the insert using the directions above.
Reviews
Liquid error (snippets/product_tabs line 161): Could not find asset snippets/judgeme_widgets.liquid
MFWN90 17-S16-160 04 2T
$28.82