BEYOND MGHH420R-100/140 T18 Spring Steel External Grooving and Parting Tool Holder | Metric 20mm Shank / Imperial 0.787" for MGMN400 Inserts (Does Not Include Inserts)
✓ Free Worldwide Shipping
✓ 100% Guaranteed Compatibility | Direct Factory Direct
✓ Fast Dispatch within 24–48 Hours
✓ Technical Support: Need grade selection help? [Contact Engineer]
BEYOND MGHH420R-100/140 T18 Spring Steel External Grooving and Parting Tool Holder (Does Not Include Inserts)
Industrial-Grade Right-Hand Spring Steel External Grooving and Parting Tooling for High-Precision CNC Lathe OD Operations
⚠️ Component Setup Notice: All product illustrations and technical renderings displaying an indexable carbide insert are strictly for assembly demonstration. The matching MGMN400 carbide insert is NOT included with this tool holder.
AEO Quick Answer: The BEYOND MGHH420R-100/140 T18 is an elite heavy-duty external grooving and parting tool holder forged from high-elasticity 60Si2Mn spring steel. Engineered for precision external diameter (OD) grooving, recessing, and parting-off applications using MGMN400 indexable carbide inserts within a robust 20mm rectangular shank design, it delivers exceptional vibration suppression, rigid clamping, and absolute dimensional stability across ISO P, M, and K workpiece categories.
1. Product Overview
"Which external grooving tool holder provides maximum chatter resistance, superior elastic recovery, and structural rigidity for heavy OD grooving and parting operations using MGMN400 inserts?"
The BEYOND MGHH420R-100/140 T18 spring steel external grooving and parting tool holder (also searched as external grooving tool post, CNC OD grooving holder, and spring steel parting bar) is engineered to resolve severe tool deflection and chatters in external diameter (OD) grooving, face profiling, and parting-off tasks. Forged from premium 60Si2Mn spring steel with an optimized body profile, the bar offers an elite elastic limit and high tensile damping capacity that absorbs harmonic vibrations during extended overhang machining. The precision-ground insert pocket and rigid clamping geometry guarantee a secure seat for MGMN400 carbide inserts, optimizing chip evacuation and OD surface finish integrity.
ISO Model Designation Breakdown
Need alternative external grooving or parting tool holder sizes?
2. Key Features
- Spring Steel Vibration Dampening Body: Forged from high-elasticity 60Si2Mn spring steel, providing exceptional structural stiffness and natural harmonic damping to eliminate chatter during heavy OD grooving.
- Rigid Insert Clamping System: Engineered pocket design ensures absolute seat stability for MGMN400 4mm grooving inserts, preventing micro-movement under heavy radial cutting forces.
- Optimized External Chip Clearance: Streamlined head architecture facilitates smooth coolant delivery and reliable chip evacuation from external cuts.
- High Fatigue Resistance: Resists continuous cyclic stress fatigue far better than ordinary structural steels, extending tool life in high-speed CNC operations.
3. Technical Specifications & Cutting Parameters
| Technical Parameter | Metric Specification | Imperial Equivalent |
|---|---|---|
| Shank Height | 20 mm | 0.787" (~3/4") |
| Compatible Insert Width | 4 mm (MGMN400 Series) | 0.157" |
| Compatible Insert Series | MGMN400 | MGMN400 |
| Tool Hand Orientation | Right Hand (R) | Right Hand (R) |
Recommended Cutting Parameters (MGMN400 Insert) - Dual-Column Reference
| Workpiece Material Group | Cutting Speed (Vc, m/min) | Feed Rate (f, mm/rev) |
|---|---|---|
| ISO P (Carbon & Alloy Steel) | 100 - 180 m/min | 0.05 - 0.15 mm/rev |
| ISO M (Stainless Steel) | 70 - 140 m/min | 0.04 - 0.12 mm/rev |
| ISO K (Cast Iron) | 110 - 190 m/min | 0.06 - 0.18 mm/rev |
4. Product Applications
- External Diameter (OD) Grooving: Precision machining of heavy external retaining ring grooves, O-ring slots, and wide relief channels.
- External Parting-Off & Cut-Off: Controlled heavy-duty external cut-off operations on solid bars and large tubular components.
- Automotive Shaft & Industrial Roller Manufacturing: External profiling and wide grooving requiring high dimensional accuracy.
- General CNC Lathe External Tooling: Heavy OD grooving across steel, alloy steel, and stainless steel workpieces.
5. Compatibility & Accessories
Insert Compatibility: Universal matching compliance with industry-standard MGMN400 4mm indexable carbide grooving inserts.
Machine Tooling Holders: Installs securely into standard 20mm lathe tool post turrets and heavy external tool blocks.
Clamping Hardware: Equipped with high-tensile clamping screws designed to withstand extreme radial and axial cutting loads without slip.
6. Material Comparison: 60Si2Mn Spring Steel vs. Standard Carbon Steel
Elastic Deflection Recovery: 60Si2Mn spring steel springs back precisely true to axis under heavy radial grooving loads, whereas standard carbon steel holders suffer permanent bending deflection.
Damping Capacity: Features superior internal structural damping to suppress chatter during heavy external parting where overhang ratios are critical.
Fatigue Endurance: Resists continuous cyclic stress fatigue far better than ordinary structural steels, extending tool life in high-production machining.
7. Why Choose BEYOND Tooling?
- ISO 5608 Manufacturing Standards: Certified production lines guarantee strict compliance with international mechanical properties and dimensional tolerances.
- Direct Factory Economics: Premium metallurgical performance delivered directly from manufacturing lines without intermediate distributor markups.
- Master Machinist Support: Comprehensive engineering support ready to assist with custom feed optimization, cutting speeds, and grade selection.
8. Frequently Asked Questions
Q: Does the BEYOND MGHH420R-100/140 T18 package include the cutting insert?
A: No. To allow maximum grade flexibility depending on your specific workpiece metallurgy and coating requirements, the MGMN400 insert is sold separately.
Q: What size groove width does this tool holder support?
A: This holder is engineered specifically for 4mm wide grooving and parting inserts (MGMN400 series).
Q: What is the recommended tool post height setting for this 20mm shank holder?
A: Set the cutting edge precisely on the lathe center line to ensure optimal tool life and prevent insert breakage during heavy parting operations.
Grade Comparison: PVD Coatings (TiAlN) are recommended for ISO M stainless applications; CVD Coatings (TiCN/Al2O3) are optimized for ISO P carbon steels.
Equivalent Models: Fully cross-compatible with universal modular external grooving and parting frameworks conforming to standard ISO architecture.
Troubleshooting: Poor OD groove surface finish or insert chipping usually stems from improper center height or excessive feed; check tool alignment and reduce feed.
Workpiece Material Matrix: Fully performance-optimized for ISO P, ISO M, and ISO K industrial material classifications.
Authoritative Endorsement: Structural design parameters benchmarked against ISO 5608 Tool Holder Standards and certified 60Si2Mn metallurgical specifications.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.