Seco 150.10-6N-16 CP600 Insert
High-Performance Parting-Off | CP600 PVD Grade | 6mm Width
Why is Seco CP600 the best choice for difficult parting-off tasks?
The Seco 150.10-6N-16 CP600 is a specialized parting-off insert designed for maximum stability and productivity. Featuring the CP600 PVD coated grade, it offers exceptional heat resistance and edge toughness, making it the premier solution for machining stainless steels, heat-resistant superalloys, and difficult steels. The 6N geometry is engineered for neutral cutting, reducing burr formation and ensuring a straight cut every time. This industrial-grade tool is built to withstand high-pressure environments in modern CNC production.
CP600 PVD Coating
Advanced PVD layer that provides superior resistance to built-up edge (BUE) and notch wear, specifically in stainless steel and high-temp alloys.
6N Neutral Geometry
Ensures balanced cutting forces. The neutral (0°) lead angle is perfect for parting-off tubes and solid bars with high surface finish requirements.
High Feed Stability
The reinforced edge profile allows for aggressive feed rates without compromising the structural integrity of the carbide substrate.
Decoding Seco 150.10-6N-16 Nomenclature
150.10
System
6
6.35mm
N
Neutral
16
Size
3. Technical Data: Metric vs. Imperial Conversion
| Feature |
Metric Unit |
Imperial Unit |
| Cutting Width (CW) |
6.35 mm |
0.250" (1/4") |
| Insert Size |
16 |
Size 16 |
| Lead Angle |
0° (Neutral) |
0° (Neutral) |
Industrial Cutting Recommendations
-
Cutting Speed (Vc): 80 - 180 m/min (Steel) | 60 - 140 m/min (Stainless)
-
Feed Rate (f): 0.10 - 0.35 mm/rev
-
Max Parting Diameter: Depends on tool holder (150.10 series)
4. Seco Grade Comparison Guide
| Grade |
Coating |
Best Use Case |
Performance |
| CP600 |
PVD TiAlN+TiN |
Stainless & Superalloys |
Extreme Edge Toughness |
| CP500 |
PVD |
General Steel/Iron |
Balanced Wear Resistance |
| 800/900 |
Uncoated/Cermet |
Finishing Cuts |
High Surface Speed |
5. Primary Applications
- Parting-off solid bars and thick-walled tubes.
- Deep grooving in ISO M (Stainless) and ISO S (Superalloys).
- Machining Carbon Steel and Alloy Steel under unstable conditions.
6. Device Compatibility
Designed for the Seco 150.10 parting-off blade system. Compatible with standard Seco block tool holders and VDI/BMT adapters. Works seamlessly on Haas, DMG Mori, and Mazak multi-tasking machines.
7. Why Source from Beyond Li?
100% Genuine
Original Seco Tools
Technical Expert
Machining Optimization
B2B Logistics
Global Express Shipping
Global User Feedback
⭐⭐⭐⭐⭐ "Stainless Steel Solution" - James H., Canada
"We were struggling with edge chipping on 316L stainless. Switched to CP600 and the tool life doubled immediately. Great B2B service."
⭐⭐⭐⭐⭐ "Tough as Nails" - Lars O., Sweden
"Consistent parting every time. The neutral geometry keeps the cut straight even at high feeds."
⭐⭐⭐⭐⭐ "Fast Shipping" - Hiroshi T., Japan
"Verified original Seco stock. Very fast delivery and the technical advice helped us optimize our feed rates."
8. FAQ - Support for Machinists
Q: Is CP600 suitable for dry machining?
A: While PVD coatings handle heat well, we strongly recommend high-pressure coolant for parting-off to ensure chip evacuation and edge cooling.
Q: Can I use this for grooving?
A: Yes, the 150.10 series is excellent for deep radial grooving, provided the tool holder geometry allows for the required depth.
Tech Tip: Avoiding Built-up Edge
When machining stainless steel, ensure your cutting speed (Vc) is high enough to keep the material flowing. The **CP600 grade** is designed to prevent BUE, but proper coolant delivery is the final step to success. **Seco Tools** - Cutting-edge reliability.
© Technical Content by cnchome-beyond.com - Global CNC Tool Authority
