SRDCN3232P16 External Turning Tool Holder for RCMT Inserts – BEYOND
Price shown is a starting point. Contact us for a precise quote based on your requirements.
SRDCN3232P16 External Turning Toolholder
Heavy-Duty 32x32mm Neutral Shank for RCMT1606 Round Inserts
Product Overview
"Which neutral toolholder provides the ultimate stability for heavy roughing and large-radius profiling on large CNC turrets?"
The Beyond SRDCN3232P16 is a powerhouse external turning toolholder designed for large-scale CNC operations using RCMT1606 round inserts. The neutral (center) orientation allows for versatile approach angles, making it a "Swiss Army knife" for heavy profiling. Round inserts are naturally stronger than diamond shapes, as they lack sharp corners that act as stress points. This holder is specifically built to handle the extreme cutting forces generated during large-radius contouring in hardened steel and high-temperature alloys.
Key Features
- ✔ Reinforced 42CrMo Steel: Heavy-duty alloy body quenched to HRC 42-45 for maximum vibration damping.
- ✔ Rigid Screw Clamping: Engineered for the RCMT 16mm insert size to prevent rotation under heavy loads.
- ✔ Neutral Orientation: Ideal for symmetrical profiling and contouring from multiple directions without tool changes.
Technical Specifications
Screw Clamp
Round Shape
45°/Neutral
7° Relief
Neutral Hand
32x32mm
170mm Len
RCMT16
| ISO Parameter | Metric (mm) | Imperial (inch) |
|---|---|---|
| Shank Size (H x W) | 32 x 32 mm | 1.26" x 1.26" |
| Total Length | 170 mm | 6.69" |
| Compatible Insert | RCMT 1606** | Round 5/8" |
Recommended Cutting Parameters
| Material Group | Speed (Vc) | Feed Rate (f) |
|---|---|---|
| Carbon Steel (P) | 140 - 260 m/min | 0.25 - 0.60 mm/rev |
| Stainless (M) | 90 - 170 m/min | 0.20 - 0.50 mm/rev |
Required Insert: RCMT 1606** / RCGT 1606**
Optimized for large 16mm round inserts for high-volume metal removal.
View Compatible Inserts →Common Applications
- Roughing Large Castings & Forgings
- Large Radius Shaft Contouring
- Oil & Gas Pipe Component Machining
- Heavy Symmetrical Profiling
Machine Compatibility
Fits heavy-duty CNC turrets with 32mm (1-1/4") tool slots. Standard ISO geometry ensures compatibility with RCMT 1606 series inserts from Beyond and other international brands.
Beyond Brand Material Comparison
Why Beyond? While budget 32mm holders often suffer from core softness leading to seat deformation, Beyond uses advanced 42CrMo alloy steel. Our heat-treatment process ensures a perfect balance between surface hardness and core toughness, preventing insert breakage even during heavy interrupted cuts in forged steel.
Global User Experience
"Indestructible. We use this for roughing large rolls and the stability is unmatched compared to diamond holders."
— Robert D., USA"Hervorragende Qualität. Der 32er Schaft ist extrem steif. Ideal für schwere Schrupparbeiten."
— Hans K., Germany"Ottimo per la profilatura di grandi raggi. La finitura è incredibile per un utensile di queste dimensioni."
— Marco V., Italy"Beyond toolholders are consistently reliable. The seat accuracy for RCMT16 is perfect."
— Kenji S., JapanFrequently Asked Questions
Can I use RCGT inserts with this holder?
Yes! While RCMT is standard, RCGT 1606 inserts (ground for aluminum) fit perfectly for large-scale non-ferrous profiling.
What does the "N" stand for in SRDCN?
The "N" denotes Neutral. This means the tool can be used for both right and left-hand machining paths depending on the turret motion.
Is 32x32mm shank too big for my machine?
Please check your lathe turret's block size. This is a large toolholder designed for heavy-duty lathes (Slant beds or large Flat beds).
Material Pro Tip: High-Efficiency Contouring
When using the SRDCN3232P16, the round insert allows you to maximize the "chip thinning" effect. On large radii, you can significantly increase the feed rate (f) as the effective chip thickness is much lower than the actual feed per revolution, allowing for much faster metal removal without sacrificing tool life.
Technical FAQ & Buying Guide
Absolutely. Our CNC carbide inserts (including CNMG, WNMG, DNMG, and APMT series) are manufactured strictly adhering to international ISO/ANSI specifications. A CNMG 120408 from OYYU BEYOND will flawlessly fit any standard turning tool holder or indexable tool from major global brands like Sandvik Coromant, Kennametal, Iscar, Walter, or SECO, providing a highly cost-effective premium alternative without sacrificing tolerance or tool life.
We offer optimized CVD and PVD multi-layer coatings for different ISO material groups:
- For Carbon/Alloy Steel (ISO P): Choose our thick multi-layer CVD coated grades (e.g., Al2O3 + TiN). They provide exceptional crater wear resistance and thermal barriers during high-speed dry or wet roughing.
- For Stainless Steel (ISO M): Choose our nano-structured PVD coated grades with sharp, positive chipbreakers (like -TM or -MA). This combination prevents work hardening and effectively controls sticky chips.
The optimal cutting parameters vary depending on the workpiece hardness and operation type:
- For General Steel Turnings: Recommended cutting speed ($V_c$) ranges from 150 to 280 m/min, with a feed rate ($f$) of 0.15 to 0.45 mm/rev.
- For Stainless Steel Finishing: Recommended cutting speed ($V_c$) is 120 to 200 m/min, with a feed rate ($f$) of 0.10 to 0.25 mm/rev.Always adjust parameters based on early wear patterns: increase $V_c$ if built-up edge occurs, or reduce $V_c$ if severe flank wear is observed.
Yes, we support machine shops, distributors, and global buyers with tiered wholesale pricing and competitive volume discounts. We also provide OEM custom manufacturing solutions for tool holders and carbide inserts based on your technical drawings. Contact our team to request a quick B2B quotation.
We provide secure worldwide express shipping (via DHL, FedEx, and UPS) with specialized, vibration-proof industrial packaging to ensure tools arrive in perfect condition. In-stock items are dispatched within 24-48 hours, while custom or bulk orders typically have a stable lead time of 15-25 days.
All our cutting tools and tool holders are manufactured strictly in accordance with ISO 9001 and international industrial standards. Every batch undergoes 100% rigorous quality control testing using high-precision optical measuring equipment to ensure reliable tool life and stable performance in continuous mass production.