TaeguTec VNMG160408MT TT8125 Carbide Turning Insert | 10 Pcs/Box
Free shipping on all orders.
Check compatibility: Confirm the model and dimensions before ordering.
Need help choosing? Contact us before ordering.
💰 Bulk savings 2-9 pcs · 6% OFF | 10+ pcs · 12% OFF
TaeguTec VNMG160408MT TT8125 Inserts
35° Diamond Copy Turning & Profiling | Universal TT8125 CVD Grade | Box of 10 Pcs
"Which 35-degree diamond carbide insert is best for medium-duty profiling and copy turning in carbon and alloy steels?"
The TaeguTec VNMG160408MT TT8125 is a double-sided, negative 35° rhombic turning insert engineered for complex CNC profiling, contouring, and medium-to-heavy stock removal. Powered by TaeguTec's premier TT8125 CVD coating grade, this insert combines a tough, gradient-sintered carbide substrate with a thick, wear-resistant TiCN and Alumina (Al2O3) thermal barrier. It excels in general steel machining by resisting crater wear at elevated cutting speeds while absorbing mechanical shock during light-to-medium interrupted cuts. Paired with the reinforced MT medium-turning chipbreaker and a sturdy 0.8mm nose radius, it maintains predictable chip evacuation across multi-directional copy-turning passes. Whether you are running complex shafts or exploring TaeguTec negative turning inserts for general production, the VNMG160408MT delivers superior reach into tight undercuts and shoulders.
Core Engineering Advantages
TT8125 Universal Steel CVD
Balanced multi-layer Al2O3/TiCN coating provides high thermal protection and edge security across continuous and interrupted steel cuts.
MT Medium-Duty Chipbreaker
Reinforced cutting edge land prevents corner fracture on the acute 35° tip while controlling chips over wide feed ranges.
35° Acute Profiling Access
Slender rhombic geometry accesses narrow relief grooves, steep tapers, and back-facing contours impossible for 55° or 80° inserts.
ISO Code Specification Breakdown
Technical Specifications & Dimensional Comparison
| Parameter | Metric (Standard) | Imperial Equivalent |
|---|---|---|
| ISO / ANSI Designation | VNMG 160408 MT | VNMG 332 MT |
| Inscribed Circle (IC) | 9.525 mm | 0.375" (3/8") |
| Thickness (S) | 4.76 mm | 0.1875" (3/16") |
| Corner Radius (RE) | 0.80 mm | 0.0315" (1/32") |
| Grade & Coating | TT8125 (CVD TiCN + Al2O3) | Universal Steel CVD Carbide |
Recommended Cutting Parameters
*Values are starting recommendations for medium turning and profiling. Due to the 35° acute nose angle, avoid excessive plunging angles greater than 25°.
| Workpiece Material | Cutting Speed (Vc) | Feed Rate (fn) | Depth of Cut (Ap) |
|---|---|---|---|
| Carbon Steel (1045 / S45C) | 190 - 340 m/min | 0.15 - 0.35 mm/rev | 0.50 - 3.00 mm |
| Alloy Steel (4140 / 4340) | 150 - 290 m/min | 0.12 - 0.30 mm/rev | 0.50 - 2.80 mm |
| Cast Iron (Gray & Ductile) | 170 - 310 m/min | 0.15 - 0.38 mm/rev | 0.60 - 3.20 mm |
Compatible Tool Holders & Boring Bar Resources
Pair these inserts with rigid 16-size (3/8" IC) negative 35° diamond external turning holders such as the Beyond MVUNR2020K16 Right-Hand Turning Tool Holder, Beyond MVUNL2525M16 Left-Hand Turning Tool Holder, and Beyond MVQNR2525M16 Right-Hand Turning Tool Holder.
For internal profiling and bore machining, explore our rough and fine boring series, browse screw-on system boring bars, or read our technical guide on how to choose the right boring bar and insert.
Industrial Applications
- Complex Contour & Copy Turning: Multi-directional OD profiling, concave radii, and stepped shafts on CNC turning centers.
- Undercutting & Back-Facing Operations: Narrow 35° included angle clears steep shoulders and relief grooves cleanly.
- General Production Steel Turning: Reliable medium-duty stock removal on carbon steel forgings, alloy steel bars, and castings.
System Compatibility & Related Insert Catalogs
The VNMG 160408MT (ANSI VNMG 332 MT) fits all standard ISO-compliant 35° rhombic toolholders featuring a 9.525mm (3/8") inscribed circle pocket, including top-and-hole clamp (M-type), double-clamp (D-type), and lever-lock (P-type) systems. To stock your tool crib across all turning geometries, explore our full range of TaeguTec VNMG inserts, TaeguTec DNMG inserts, and TaeguTec CNMG inserts, or compare alternative 35° diamond tooling in our Korloy VNMG and ZCC-CT WNMG collections.
TaeguTec Grade Selection Matrix
Selecting the optimal TaeguTec turning grade for your production setup:
- TT8125 (Featured - First-Choice Steel CVD): Best all-around balance of wear resistance and edge toughness for general carbon and alloy steel turning (ISO P15-P35).
- TT8115: Higher wear-resistance CVD grade engineered for high-speed continuous finishing and semi-finishing of steels and cast irons.
- TT9080 / TT9030: Nano-PVD coated grades designed specifically for gummy austenitic stainless steels (ISO M) and heat-resistant superalloys (ISO S).
Why Machinists Choose Our Store
100% Genuine Guarantee
Directly sourced original TaeguTec factory-sealed packages (10 pcs/box).
Same-Day Dispatch
In-stock cutting tools ship rapidly to keep your CNC spindles turning.
Technical Engineering Support
On-staff tooling specialists available for speed and feed recommendations.
Frequently Asked Questions
Q: When should I choose a VNMG insert over a DNMG or CNMG insert?
A: Choose VNMG (35° nose angle) when your part requires intricate copy turning, steep back-angles, or narrow relief grooves where 55° (DNMG) or 80° (CNMG) inserts would collide with the workpiece.
Q: What does the "MT" chipbreaker stand for on TaeguTec inserts?
A: "MT" stands for Medium Turning. It features a strengthened cutting edge land that protects the slender 35° tip from chipping while breaking chips cleanly across moderate feeds and depths of cut.
Q: How many cutting edges are in one box?
A: Each double-sided VNMG insert has 4 usable cutting corners (2 per side), giving you 40 indexable edges per 10-piece factory-sealed box.
Need Help With TaeguTec Inserts?
Looking for a TaeguTec equivalent, alternative grade, or sample catalog? Our CNC specialists have helped 50+ manufacturers in aerospace, automotive, and medical machining source the right tooling at 30–50% lower cost than OEM prices.
This TaeguTec insert is in stock. 24-hour quote response. ISO 9001 certified. Ships from Hangzhou in 3–7 days.
Technical FAQ & Buying Guide
When choosing CNC cutting tools, check the full model code, dimensions, grade and selected variant before ordering. Do not rely on the product image alone.
For carbide inserts, tool holders, drills and end mills, compare the mounting dimensions, connection type and manufacturer's specifications with your holder or machine. If you are unsure, share your existing part number and machining application with us before ordering.
Check the product listing for the selling unit, pack quantity and included components. If it is unclear whether the price is per piece or per pack, or whether a tool body and inserts are sold separately, contact us before purchasing.
Select cutting speed, feed rate and depth of cut using the relevant manufacturer's recommendations for your tool model, workpiece material, machine conditions and coolant method. The same settings are not suitable for every product or application.
Our automatic quantity discount is 6% off for 2–9 items and 12% off for 10 or more items, based on the total product quantity in the cart. Other offers may not combine with this discount; check the applicable offer conditions.
According to our shipping policy, orders are typically processed and shipped within 1–3 business days after confirmation. Delivery generally takes 5–20 business days, depending on your destination and shipping method. Customs clearance or unforeseen delays may affect delivery times. A tracking number is sent by email after shipment.