Sort by:
Mitsubishi TCMT110204 UE6110 | CVD Coated Steel Turning Insert
$44.11 USD
TCMT110204 UE6110 Mitsubishi Materials | The Standard for High-Speed Steel Turning The Mitsubishi TCMT110204 UE6110 is a high-performance CVD coated carbide insert designed for high-efficiency turning of carbon and alloy...
Mitsubishi TCMT16T308 UE6020 | CVD Coated Carbide Turning Insert
$62.02 USD
TCMT16T308 UE6020 Mitsubishi Materials | The Versatile Standard for Steel Turning The Mitsubishi TCMT16T308 UE6020 is a high-performance CVD coated carbide insert engineered for the versatile turning of carbon and...
Mitsubishi TCMT16T308 UC5115 | CVD Carbide Insert for Cast Iron
$62.02 USD
TCMT16T308 UC5115 Mitsubishi Materials | The High-Speed Cast Iron Turning Specialist The Mitsubishi TCMT16T308 UC5115 is a high-performance CVD coated carbide insert engineered specifically for cast iron turning. Utilizing the...
Mitsubishi TCMT16T308 NX2525 | Mirror Finish Cermet Turning Insert
$54.44 USD
TCMT16T308 NX2525 Mitsubishi Materials | High-Efficiency Cermet for Precision Finishing The Mitsubishi TCMT16T308 NX2525 is a high-performance cermet turning insert designed for steel finishing operations that require both superior surface...
Mitsubishi TCMT16T304 VP15TF | Miracle Coated Carbide Turning Insert
$62.02 USD
TCMT16T304 VP15TF Mitsubishi Materials | The Legendary "Miracle Grade" Multi-Material Specialist The Mitsubishi TCMT16T304 VP15TF is a premium PVD coated carbide insert designed for high-performance universal turning. Featuring the world-renowned...
Mitsubishi TCMT16T304 US735 | PVD Carbide Insert for Stainless Steel
$62.02 USD
TCMT16T304 US735 Mitsubishi Materials | The Specialist for Stainless Steel & Interrupted Cutting The Mitsubishi TCMT16T304 US735 is a high-toughness PVD coated carbide insert specifically engineered for stainless steel turning....
Mitsubishi TCMT16T304 UE6110 | CVD Coated Carbide Turning Insert
$62.02 USD
TCMT16T304 UE6110 Mitsubishi Materials | High-Efficiency CVD Coated Steel Specialist The Mitsubishi TCMT16T304 UE6110 is a high-performance CVD coated carbide insert engineered specifically for high-speed stable machining of steel. Utilizing...
Mitsubishi TCMT16T304 UE6020 | CVD Carbide Turning Insert for Steel
$62.02 USD
TCMT16T304 UE6020 Mitsubishi Materials | Versatile CVD Carbide for Reliable Steel Machining The Mitsubishi TCMT16T304 UE6020 is a highly reliable CVD coated carbide insert engineered for the general turning of...
Mitsubishi TCMT16T304 UC5115 | CVD Carbide Insert for Cast Iron
$62.02 USD
TCMT16T304 UC5115 Mitsubishi Materials | The Specialist for Cast Iron Turning (ISO K) The Mitsubishi TCMT16T304 UC5115 is a high-performance CVD coated carbide insert designed for high-speed machining of gray...
Mitsubishi TCMT16T304 NX2525 | Mirror Finish Cermet Turning Insert
$54.44 USD
TCMT16T304 NX2525 Mitsubishi Materials | The Standard for Mirror-Finish Steel Turning The Mitsubishi TCMT16T304 NX2525 is a high-performance turning cermet insert engineered for precision finishing operations. Utilizing the NX2525 uncoated...
Mitsubishi TCMT110208 VP15TF | Miracle Coated Carbide Turning Insert
$43.55 USD
TCMT110208 VP15TF Mitsubishi Materials | The "Miracle Grade" Multi-Material Specialist The Mitsubishi TCMT110208 VP15TF is a premium PVD coated carbide insert engineered for maximum versatility across ISO P, M, K,...
Mitsubishi TCMT110208 UE6110 | CVD Coated Steel Turning Insert
$46.37 USD
TCMT110208 UE6110 Mitsubishi Materials | High-Feed Steel Turning & Edge Durability The Mitsubishi TCMT110208 UE6110 is a high-performance CVD coated carbide insert engineered for heavy-duty finishing and semi-finishing of steel....
Mitsubishi TCMT110204-FM VP15TF Carbide Turning Insert for Stainless Steel
$44.11 USD
TCMT110204-FM VP15TF Original Mitsubishi Materials | Carbide Indexable Turning Insert Product Description The TCMT110204-FM VP15TF is a high-performance triangular turning insert designed by Mitsubishi Materials. Featuring the FM Chipbreaker for...
Mitsubishi TCMT110204 VP15TF | Miracle Coated Carbide Turning Insert
$43.55 USD
TCMT110204 VP15TF Mitsubishi Materials | The "Miracle Grade" Universal Turning Specialist The Mitsubishi TCMT110204 VP15TF is a premium PVD coated carbide insert designed for maximum versatility. Featuring Mitsubishi’s proprietary Miracle...
Mitsubishi TCMT110204 US735 | PVD Carbide Insert for Stainless Steel
$43.55 USD
TCMT110204 US735 Mitsubishi Materials | Stainless Steel & Difficult-to-Cut Materials Specialist The Mitsubishi TCMT110204 US735 is a high-performance PVD coated carbide insert designed for superior reliability in stainless steel turning....
Mitsubishi TCMT110204 UE6020 | CVD Carbide Turning Insert for Steel
$44.11 USD
TCMT110204 UE6020 Mitsubishi Materials | Versatile CVD Carbide for Steel Machining The Mitsubishi TCMT110204 UE6020 is a highly versatile CVD coated carbide insert designed for the general turning of carbon...
Mitsubishi TCMT110204 UC5115 | CVD Carbide Insert for Cast Iron
$43.55 USD
TCMT110204 UC5115 Mitsubishi Materials | The Cast Iron Turning Specialist (CVD Coated) The Mitsubishi TCMT110204 UC5115 is a high-performance CVD coated carbide insert specifically engineered for cast iron turning. Utilizing...
Mitsubishi TCMT110204 NX2525 | Mirror Finish Cermet Insert
$35.68 USD
TCMT110204 NX2525 Mitsubishi Materials | High-Gloss Cermet Finishing Specialist The Mitsubishi TCMT110204 NX2525 is a high-precision turning cermet insert engineered for superior surface quality. Utilizing the NX2525 uncoated cermet grade,...
Mitsubishi TCMT110202 VP15TF | Miracle Coated Carbide Turning Insert
$43.55 USD
TCMT110202 VP15TF Mitsubishi Materials | The "Miracle Grade" Multi-Material Specialist The Mitsubishi TCMT110202 VP15TF is a premium PVD coated carbide insert renowned for its "Miracle Coated" technology. This indexable turning...
Mitsubishi TCMT110202 US735 | PVD Carbide Insert for Stainless Steel
$44.11 USD
TCMT110202 US735 Mitsubishi Materials | Precision Finishing Specialist for Stainless Steel The Mitsubishi TCMT110202 US735 is a high-precision PVD coated carbide insert engineered for finishing operations in stainless steel turning....
Mitsubishi TCMT090204-FM VP15TF | Miracle Coated Finishing Insert
$45.31 USD
TCMT090204-FM VP15TF Mitsubishi Materials | The Precision Finishing Specialist The Mitsubishi TCMT090204-FM VP15TF is a premium PVD coated carbide insert engineered for high-precision finishing operations. Featuring the specialized FM (Fine...
Mitsubishi TCMT090204 US735 | PVD Carbide Insert for Stainless Steel
$43.90 USD
TCMT090204 US735 Mitsubishi Materials | Stainless Steel & Toughness Specialist The Mitsubishi TCMT090204 US735 is a high-toughness PVD coated carbide insert specifically engineered for the challenging task of stainless steel...
Mitsubishi TCMT090204 UE6110 | CVD Coated Steel Turning Insert
$43.90 USD
TCMT090204 UE6110 Mitsubishi Materials | High-Speed Steel Turning Specialist The Mitsubishi TCMT090204 UE6110 is a high-performance CVD coated carbide insert engineered for stable, high-speed turning of steel. Utilizing the UE6110...
Mitsubishi TCMT090204 NX2525 | Mirror Finish Cermet Insert
$43.90 USD
TCMT090204 NX2525 Mitsubishi Materials | High-Gloss Cermet Finishing Specialist The Mitsubishi TCMT090204 NX2525 is a high-precision turning cermet insert engineered for superior surface quality. Utilizing the NX2525 uncoated cermet grade,...
Mitsubishi TB / TP / TC 60° Triangle Inserts — TCMT, TPGH, TPGX, TPMH, TPMN, TCGT, TCMW
100 in-stock 60° triangular Mitsubishi indexable carbide turning inserts covering 7 geometry families (TCMT / TCGT / TCMW / TPGH / TPGX / TPMH / TPMN) and 8 grade families (US735 / NX2525 / VP15TF / UE6020 / UE6110 / UC5115 / HTI10 / UTI20T). 2-3 day dispatch from Zhejiang warehouse, DHL/UPS worldwide 3-7 day, all ISO 1832 compliant.
100SKUs in Stock
7Geometry Families
8Carbide Grades
2-3dDispatch Time
About 60° Triangle Inserts (T-Style)
The ISO 1832 T-shape family delivers a 60° included-angle cutting edge — the strongest geometry in turning, with the largest nose radius per IC size. Mitsubishi's 60° lineup covers two clearance variants:
- TC (7° negative rake) — Strong cutting edge for roughing steel, stainless, and cast iron. Compatible with standard negative turning holders (MTJNR/L, PTFNR/L, etc.).
- TP (11° positive rake) — Sharp edge, low cutting force, ideal for finishing, profiling, and slender shaft work. Less common rake than 7° but chosen for specific geometries (TPGH/TPGX for profiling, TPMH for boring).
Each clearance family branches into three chip-breaker variants: G (one face chip-breaker, sharp edge), M (chip-breaker on both faces, double-edged economy), and W (no chip-breaker, used as brazed or flat profiling edge). Combined with three tolerance classes — G (ground periphery), M (precision molded), X (sharp-ground for aluminum) — Mitsubishi offers 7 distinct T-style SKUs to cover profiling, semi-finishing, finishing, and boring.
7 Geometry Families — Featured In-Stock SKUs
Below are 14 representative SKUs from our 100-piece 60° triangle inventory, covering all 7 geometry families. Click through to verify grade specs, IC size, nose radius, and full dimensional drawings.
TCMT — Negative 7° (M chip-breaker)
29 SKUs. Workhorse 60° negative turning insert. Chip-breaker on both top and bottom faces. Most common choice for steel roughing and finishing on MTJNR/L holders.
US735VP15TFUE6020UE6110UC5115NX2525
TCGT — Negative 7° (G chip-breaker)
4 SKUs. Ground-periphery tolerance (G-class) with chip-breaker on one face only — used when sharp-edge profiling is required without sacrificing negative rake strength.
VP15TFNX2525
TCMW — Negative 7° (W: no chip-breaker)
3 SKUs. Solid (no chip-breaker) 60° negative insert. Used for cast iron turning where chip-breaking is not needed, and as a flat-edge profiling tool in tool & cutter grinding.
HTI10
TPGH — Positive 11° (G: one-face chip-breaker, H tolerance)
27 SKUs. Most popular 60° positive turning insert. Chip-breaker on one face with H (precision) tolerance. Used for finishing, profiling, and slender shafts where low cutting force is critical.
VP15TFNX2525HTI10
TPGX — Positive 11° (G chip-breaker, X tolerance)
11 SKUs. Ground-periphery X (super-sharp) tolerance with chip-breaker on one face. The X tolerance class is reserved for aluminum and non-ferrous profiling where a mirror-finish edge is required.
HTI10NX2525
TPMH — Positive 11° (M chip-breaker, H tolerance)
17 SKUs. M-style chip-breaker (both faces) on positive 11° with H tolerance. The MV / FV chip-breaker geometries are specifically designed for internal boring bars — low cutting force, excellent chip control in small diameters.
VP15TFUS735NX2525UE6020
TPMN — Positive 11° (M chip-breaker, N tolerance)
9 SKUs. N-tolerance (precision molded) with M chip-breaker — the heavy-duty positive option. TPMN22 size class handles roughing of cast iron, large-diameter profiling, and interrupted cuts where the strongest positive edge is needed.
UTI20TVP15TFNX2525
Browse by Application & Grade
All 100 60° triangle SKUs are grouped below by application and grade. Click any category to filter the full catalog.
By Workpiece Material
- Steel Turning (P-grade) — VP15TF, UE6020, UE6110, US735
- Stainless Steel (M-grade) — US735, VP15TF
- Cast Iron (K-grade) — UC5115, UTI20T
- Aluminum & Non-Ferrous (N-grade) — HTI10, F7030
- Finishing & Mirror Surface — NX2525 (cermet), VP15TF (PVD)
By Operation
- Roughing (heavy depths > 3 mm) — TPMN, TCMT with N/M tolerance
- Semi-Finishing — TCMT, TPGH with M-class chip-breakers
- Finishing / Profiling — TCGT, TPGH, TPGX with G-class chip-breaker
- Internal Boring — TPMH-MV/FV (specifically designed for boring bars)
- Aluminum Profiling (Sharp Edge) — TPGX-HT, TCMW-HT, TCGT-F
By Carbide Grade
- CVD Steel (P-grade) — US735 (1st gen), UE6020/UE6110 (2nd gen, P20-P30)
- PVD Universal (Miracle Coat) — VP15TF (Al-rich, P10-P25, M10-M25, S10-S20)
- CVD Cast Iron (K-grade) — UC5115 (K05-K20)
- Cermet (Finishing) — NX2525 (P05-P15, mirror surface)
- Uncoated Carbide — HTI10 (aluminum N10-N25), UTI20T (cast iron roughing K15-K30)
TC vs TP vs CCMT vs TCMT — 4-Way Geometry Comparison
Where does the 60° T-shape fit among Mitsubishi's turning lineup? This table compares T-style 60° against the more common C-style 80° and D-style 55° inserts.
| Attribute | TC (60° neg.) | TP (60° pos.) | CC (80° neg.) | DC (55° pos.) |
|---|---|---|---|---|
| Included angle | 60° | 60° | 80° | 55° |
| Clearance (rake) | 7° negative | 11° positive | 7° negative | 7° positive |
| Edge strength | ★★★★★ (strongest) | ★★★ (sharpest) | ★★★★ | ★★★ |
| Best for | Roughing, heavy | Profiling, finishing | General turning | Profiling, light |
| Nose radius (max / IC) | 0.4 (largest) | 0.4 | 0.4 | 0.2 (smallest) |
| Common holders | MTJNR/L, PTFNR/L | MTJNR/L + boring bar | DCLNR/L, PCLNR/L | SDJCR/L, PDJNR/L |
| Surface finish | Good | Excellent (low force) | Good | Best (small nose radius) |
| Common workpiece | Steel, cast iron | Steel, stainless, aluminum | Steel, cast iron | Shaft, slender parts |
| Catalog count (Mitsubishi) | 36 (TCMT/TCGT/TCMW) | 64 (TPGH/TPGX/TPMH/TPMN) | 25+ (CCMT/CCMW) | 15+ (DCMT/DCGT) |
| Best grade pairing | UE6020, UC5115 | VP15TF, NX2525, HTI10 | UE6020, VP15TF | VP15TF, F7030 |
Bottom line: Pick TC when you need maximum edge strength for roughing or interrupted cuts. Pick TP for profiling, finishing, and internal boring where low cutting force is critical. For general profiling, CCMT remains the most popular, but TPGX/TPGH/TPMH offer a sharper edge and better surface finish in finishing operations.
How to Choose the Right 60° Triangle Insert — 3-Step
Step 1 — Identify the Operation
- Roughing / heavy depths (> 3 mm): Choose TC-class (TCMT, TCGT) with N-tolerance or M-class chip-breaker. Negative rake handles higher feed rates.
- Finishing / profiling / boring: Choose TP-class (TPGH, TPGX, TPMH-MV). Positive 11° rake reduces cutting force and improves surface finish.
- Aluminum / non-ferrous: Choose TPGX-HT (X tolerance, uncoated HTI10) for sharp edge retention.
Step 2 — Match the Grade to Workpiece
- Steel (P-grade): UE6020 / UE6110 (CVD 2nd gen) for general use, US735 for stainless, VP15TF for finishing or universal application.
- Cast iron (K-grade): UC5115 (CVD coated) or UTI20T (uncoated heavy).
- Aluminum (N-grade): HTI10 (uncoated sharp edge). F7030 (PVD aluminum-specific) also stocked for some series.
- Mirror finishing: NX2525 cermet (TPGH / TPGX / TPMN grades).
Step 3 — Verify Holder Compatibility
- TC (60° negative): Use negative turning holders — Lever Lock System External Holder, Double Clamp System External Holder, or Multi-Lock System External.
- TP (60° positive): Use positive turning holders with 60° lead angle (PTTNR/L for TPG-style, or boring bars for TPMH-MV).
- Internal boring (TPMH-MV): Use boring bars with T-style pockets (e.g., Screw-On System Boring Bar with T insert pocket).
Frequently Asked Questions
What is the difference between TC and TP 60° triangle inserts?
TC has a 7° negative clearance (stronger edge for roughing), while TP has 11° positive clearance (sharper edge, lower cutting force for finishing). Use TC for steel roughing and interrupted cuts, TP for profiling, finishing, and internal boring on slender shafts.
Why does this collection only have TP and TC types but the handle says TB / TP / TC?
TB (5° positive clearance) is a rare legacy variant — very few Mitsubishi insert series offer TB geometry today, and we do not currently stock any. If you need TB-style inserts for a specific holder pocket, please request a quote — we can source on-demand within 5-7 days from our OEM partners.
What does the second letter (C vs P vs M) mean in TCMT vs TPGH vs TPMH?
The second letter is the clearance angle class: C = 7° negative, P = 11° positive. The third letter indicates the chip-breaker type: M = chip-breaker on both faces (double-edged economy), G = chip-breaker on one face (sharp edge), W = no chip-breaker (flat edge). The fourth letter is tolerance: T = standard (T-class), H = precision (H-class), G = ground periphery, N = precision molded, X = super-sharp ground.
Which grade is best for stainless steel 304/316 turning with TPGH inserts?
For stainless 304/316, we recommend VP15TF (PVD Al-rich "Miracle Coat") as the primary choice — its sharp cutting edge with alumina coating handles austenitic stainless without built-up edge. For heavier roughing, US735 (CVD steel grade) is also stocked. Cermet NX2525 works for finishing stainless at low feed rates but is not recommended for interrupted cuts.
What is the difference between TPGH and TPGX?
TPGH uses H tolerance (precision ±0.025 mm, suitable for general profiling and finishing), while TPGX uses X tolerance (super-sharp, ±0.013 mm, reserved for aluminum and non-ferrous profiling where maximum sharpness is critical). TPGX is essentially a sharper, more precise version of TPGH for the same insert geometry — choose TPGX for aluminum and TPGH for steel/stainless finishing.
What is the smallest and largest 60° triangle insert you stock?
Smallest: TCGT060102L-F (6.0 mm inscribed circle, 0.2 mm nose radius, super-precision for small-diameter profiling). Largest: TPMN220412 (22.0 mm IC, 1.2 mm nose radius, heavy-duty roughing of cast iron and large shafts). We also stock the full intermediate range (TCMT 11 / 16, TPGH 11 / 16, TPMH 08 / 16).
Related Mitsubishi Inserts & Holders
Need a Specific 60° Triangle Insert Not in Stock?
100 in-stock SKUs covering the most common TP / TC geometries. For TB-style legacy inserts, custom chip-breaker geometry, or specific Mitsubishi equivalent cross-references (Sandvik / Kennametal / Iscar), request a quote — 24-hour response, 2-3 day dispatch from Zhejiang, DHL/UPS worldwide 3-7 days.
Request a Quote Download Catalog Authenticity Guarantee WhatsApp Engineer